Accent MC (2006-11) :: Couldn't Engage Reverse When Put Shift Knob On
So I just installed my short shifter and everything works great, all the gears engage, however, when I put my shift knob on I noticed I couldn't engage reverse because it sits down too low and doesn't allow the reverse lockout to get over the rail and engage reverse. I have to loosen the knob so it sits higher and then I can engage reverse, but it moves around, so I can't leave it like this...right now my plan is to make some sort of spacer for the knob to sit on and then put loctite on it...seems like it would solve my problem. I have a Hyundai Aluminum shift knob and the short shift is OEM so I don't see what could be wrong ...
View 8 RepliesGolf/GTI VI :: Shift Knob Broke Off
The other day the plastic top piece of my shift knob broke off (that had the shift pattern painted on it) and it made me once again want to replace the stock shift knob. I was considering buying one, but other than TWM I can't find any that I really like, so I want to machine one myself. My biggest problem in planning right now is what metal to use, SS is nice but expensive, and how to attach it to the leather and the stick. The only way I can think of attaching it to the stick is with set screws which would be hard to drill.
View 1 RepliesGolf IV R32 :: Shift Knob Jolts On Its Own
This has been bothering since the day I got my R. When im in 6th gear and let off the throttle I notice my shifter jolt a bit. Is this normal?
View 12 RepliesGolf/GTI VI :: How To Reinstall The OEM Shift Knob
I went to the golf ball, but I am thinking of going back to OEM. Looking for a heads-up about the process?
View 6 RepliesToyota - Echo :: Vibration Feedback Into Steering Wheel At Slow Speed
I have a 2001 Toyota Echo which developed severe vibration feedback to the steering wheel when the car was driven at low speed or stopped at a traffic sign or signal.
I took the car to the Toyota dealer and they checked the brakes, replaced the front rotors. They also checked the fuel pump and other engine components. The spark plugs and PCV vale were replaced, as well as the crank seal.
When I left the garage, the vibration reappeared after driving about five minutes. I immediately went back to the garage and waited while the mechanic checked the car. He came to the waiting room and said I would not believe what they found. I went to the garage with him and the hood on the car was raised. He started the car and there was no unusual vibration.
He closed the hood and the vibration started again. The problem was that the underhood reinforcement panel had come unwelded (or unglued) and it was vibrating. A mechanic came from the body shop and put a sealer/filler at the loose spots, we let the car sit for a while, the mechanic said the sealer/filler would expand to close the gap, and I drove the car home. The vibration had stopped.
Golf IV R32 :: Shift Knob Removal / Reinstall?
I recently purchased my R32 and the previous owner installed a short throw shifter. The knob and aluminum ring look like they are installed correctly but the boot won't stay up next to the aluminum ring. I originally thought that it would just either snap into place or it would need to twist to lock it into place. I've looked at and I can't figure it out. How it is supposed to attach to the aluminum ring?
View 4 RepliesGolf/GTI VI :: Shift Knob Is Very Hard To Move When Car Is Parked
I am experiencing a very weird issue ... at least in my opinion with my DSG on my 2012 mk6 GTI. I am not sure if this is the DSG "clunk" but when parked uphill/downhill and going from P to R the shift knob is very hard to move. When switching it, it almost sounds like there is some metal grinding. This happens when the car is parked once again uphill/downhill in 99% of the time. There is some very rare instances when the DSG acts the same way when i park it on a leveled street but extremely rare once again. Should I be worried? The DSG has been a great transmission so far, no issues what so ever except VW's flash.
View 10 RepliesGolf/GTI VI :: Loose Manual Shift Knob / Lateral Rotation?
I have a 2014 GTI 6MT, and am trying to figure out if, when I got the car 3 months ago new, the shift knob was loose, or tight. Right now, I just noticed it has the lateral rotation (left/right) maybe 1/8" or so. Just can't remember when I got it, if I noticed that.
Shift knob had lateral rotation when you got your car, or shortly thereafter?
Elantra XD (2001-06) :: Hum Or Vibration When Shifting In Reverse?
My car literally started doing this thing where it sounds like a vibration or humm when putting my Elantra into reverse.
View 2 RepliesFord Transmission :: Hard Shift And Clunk When Shifting To Reverse
I just recently bought a 95 F150 with a 351. The truck has high mileage, about 190k, and I am not sure how long the transmission has left. It rides smooth down the road, but when I put the truck into reverse it hesitates for a moment then makes a loud clunking sound(as if a door is being slammed) and then jerks into gear. The reverse works great at the moment though. Should I be worried, is there anything I can do to fix this?
View 11 RepliesGolf IV R32 :: Hard To Get In Reverse And Shifting From 1st To 2nd Is Very Rough
Lately my R is acting up, sometimes hard to get in reverse and shifting from 1st to 2nd is very rough. I looked at the cables , the left one towards the engine , the rubber bushings seems to be broken, lots of wiggle in there, is that enough to cause this? Is there any adjustments needed on the cables anyways?
View 9 RepliesTouareg :: How To Take The Shift Knob Off
First the wife crushes the underbody on a huge rock cutting a corner. Now she spilled a whole pop down the shift lever, and its glued shut - it will hardly move. I know how to get the console off, but How do I take just the 'shift knob' off? I need to get the flexible piece underneath it off so we can wash all the parts.. I have the upper console part off.
View 11 RepliesGolf/GTI VI :: Hard Shifting Into Reverse When Transmission Is Cold
Noticed that the transmission is cold (ie. sits overnight) it is hard, sometimes impossible, to shift into reverse. Specs on my gti: 14k miles, pretty much stock, manual trans...
View 1 RepliesGolf IV / Jetta IV :: 2000 GLS VR6 Not Shifting Into Reverse Until It Warmed Up A Bit
My 2000 Jetta gls vr6 automatic was not shifting into reverse until it warmed up a bit, so I did a filter and fluid change, car level, warm pumped fluid while shifting gears. No problem. Next morning no forward fear, guess I split the gasket by over tighting. Had it towed home. Oh, tried to get to work, adding fluid made it go. Now now gasket and fluid. No gears at all. Generic code reader said electric malfunction on every shift solinoid, torque converter lockout and something about shift timing malfunction. Basically everything connected to ribbon harness. What's up? Did I fry it. Also I have a 2002 triptronic from my 2002 vr6, suppose that's not a bolt on?
View 1 RepliesGolf/GTI VII :: DSG Momentary Stall When Shifting From Reverse To Drive
Two months and 2500 miles on my GTI and I feel like I finally know what the DSG is going to do most of the time. Driving with a cold tranny? Expect some delayed clutch takeup and very noticeable downshifting. Downshifting to pass? Goose the throttle a bit before hand to let the car know what you want. Shifting from reverse to drive? Better come to a full stop. EXCEPT! My DSG will still seemingly stall during this transition roughly 1 out of 3 times. I cannot find any rhyme or reason to it and now basically have to sit stopped in N for a good 3-5 seconds before shifting into D to keep the car from doing that quick surge and stop maneuver. I feel like it might be something with the timing of when I press or release the brake. I love every other aspect of the car which is why it's so annoying having to explain to passengers why the transmission in my 30 thousand dollar hatchback just fell on its face.
View 8 RepliesGolf IV / Jetta IV :: Reverse Lights Flash While Shifting
Specifically only from 1st to 2nd. I'm kinda knew at this kinda stuff and just started school so I haven't gotten to this part of knowledge. Looking for a solution I've heard two possibilities. For a GTI 12v vr6.
View 1 RepliesPassat (B5) :: V6 Shift Knob Is Cracking
I've got a 2001.5 v6 passat w/ auto and my shift knob has this cool burl veneer on it. I think it's real wood but it's pretty thin and it's got cracks on the front and the back. I can't see any simple way to remove the stick so that I can try to glue it. How to do that. But it's a standard tiprtonic shifter ... probably the standard on that model.
View 3 RepliesPassat (B7) :: DSG Shift Knob Removal
I am trying to remove the shift knob and the steps are entirely different than the DSG knobs from the GTI; You take just the boot off (not the assembly) then underneath is a hose clamp which needs to be removed. (this is not on the GTI version); I cannot figure out how to get this clamp off; I guess you need hose clamp pliers? And then do you need a new hose clamp? Won't it ruin the clamp?
View 24 RepliesPrius (2010-12) :: Way To Reverse The Drive Knob?
Is there any way to reverse the drive knob so that forward is drive and backward is reverse? For some reason I tend to put it in reverse and expect to go forward. Any options?
View 1 Replies