Elantra MD (2010-15) :: How To Remove Manual Shift Knob
I have a 2011 elantra a 6 speed manual and im trying to take off the shift knob and can't seem to do it....
View 33 RepliesElantra MD (2010-15) :: Manual Transmission Loose - Gears Make Noise As Shift From Coast To Drive
Ok so my transmission feels loose, too much play between the coast and drive side of the gears. Makes enough noise now that my wife complained about it so I'm looking into taking it to the dealer. I pretty much expect them to pass this off and do nothing, but its getting worse especially in the last couple of months.
Noticed a lot of play in there gearbox? Can you hear the gears make noise as they shift from coast to drive side?
Golf/GTI VI :: Shift Knob Broke Off
The other day the plastic top piece of my shift knob broke off (that had the shift pattern painted on it) and it made me once again want to replace the stock shift knob. I was considering buying one, but other than TWM I can't find any that I really like, so I want to machine one myself. My biggest problem in planning right now is what metal to use, SS is nice but expensive, and how to attach it to the leather and the stick. The only way I can think of attaching it to the stick is with set screws which would be hard to drill.
View 1 RepliesGolf IV R32 :: Shift Knob Jolts On Its Own
This has been bothering since the day I got my R. When im in 6th gear and let off the throttle I notice my shifter jolt a bit. Is this normal?
View 12 RepliesGolf/GTI VI :: How To Reinstall The OEM Shift Knob
I went to the golf ball, but I am thinking of going back to OEM. Looking for a heads-up about the process?
View 6 RepliesGolf IV R32 :: Shift Knob Removal / Reinstall?
I recently purchased my R32 and the previous owner installed a short throw shifter. The knob and aluminum ring look like they are installed correctly but the boot won't stay up next to the aluminum ring. I originally thought that it would just either snap into place or it would need to twist to lock it into place. I've looked at and I can't figure it out. How it is supposed to attach to the aluminum ring?
View 4 RepliesGolf/GTI VI :: Shift Knob Is Very Hard To Move When Car Is Parked
I am experiencing a very weird issue ... at least in my opinion with my DSG on my 2012 mk6 GTI. I am not sure if this is the DSG "clunk" but when parked uphill/downhill and going from P to R the shift knob is very hard to move. When switching it, it almost sounds like there is some metal grinding. This happens when the car is parked once again uphill/downhill in 99% of the time. There is some very rare instances when the DSG acts the same way when i park it on a leveled street but extremely rare once again. Should I be worried? The DSG has been a great transmission so far, no issues what so ever except VW's flash.
View 10 RepliesGolf/GTI VII :: Vibration Or Feedback In The Shift Knob When Shifting Into Reverse?
Is it normal to occasionally feel a little vibration or feedback in the shift knob when putting the car into reverse? It happens whether the car is in the "Warm-Up" phase or not, and seems pretty random. Happens about 25% of the time. It doesn't last but a tenth of a second, and it just barely makes an audible noise when the window is rolled down. This is my first manual transmission car so I just don't have the experience to 'diagnose' this. And no, I'm not trying to put the car in reverse while the car is still rolling forward.
VW Golf 5-speed....
Golf V R32 :: When On Straightaways At Higher Speeds Getting Some Lateral Movement
Getting some lateral movement when on straightaways at higher speeds, it's minimal but feels like the whole car is swaying a little side to side. The suspension feels great otherwise and cornering is accurate. My current setup is:
- Bilstein Sport Shocks and Struts
- Neuspeed Rear Sway Bar
- H&R Front Sway Bar
- Stock on the rest
I think this started when I added the front sway bar but am not sure, had the rear on long before adding it. Would upgraded sway bar end links work or make this more noticeable? Thought about trying to swap the stock front sway bar back in but that one is kind of difficult to get to. How to remedy this?
Golf IV / Jetta IV :: 2002 GTI / Manual Shift - No Reverse
When you sit in the car and put it in reverse it wont go in.
If you stick your hand in the engine compartment, push down on the golf club looking linkage and shift it into reverse it goes right in and you are able to back up the car.
So my question is which linkage may need fixing or replacing or adjustment. The shifter linkage in the car? the linkage on the golf club thing or any parts in between.
Golf/GTI VI :: Manual Transmission - Shift From 3rd To Neutral (bypassing 1st And 2nd) When Coming To A Stop?
On a manual car, I know it's not the best thing to go from neutral, completely bypass 1st gear, and shift to 2nd gear. As well as 3rd to 5th bypassing 4th. However, is it the same for downshifting into neutral or another gear? Will it hurt the transmission to go from 3rd to neutral (bypassing 1st and 2nd) when coming to a stop? I do know that shifting from 4th to 2nd gear and bypassing 3rd will harm your tranny. I just want to double check if I'm right...
View 24 RepliesLexus IS 2014+ :: 2015 - Shifter Knob Seems Loose
I have a 2015 is350 f sport. I don't know if this is normal, but my shift knob is very loose. I can literally take my thumb and pointer finger and turn it either way with almost any pressure. When I turn it, the leather seems to be attached, and turns with the shifter when I turn it to the right to tighten it.
View 13 RepliesGolf V R32 :: Steel Rattle Right At The Shift / Exhaust Loose?
Everytime I run my revs past 4 and shift, I can hear a steel rattle right at the shift. It's stock exhaust btw, no mods...
View 24 RepliesTouareg :: How To Take The Shift Knob Off
First the wife crushes the underbody on a huge rock cutting a corner. Now she spilled a whole pop down the shift lever, and its glued shut - it will hardly move. I know how to get the console off, but How do I take just the 'shift knob' off? I need to get the flexible piece underneath it off so we can wash all the parts.. I have the upper console part off.
View 11 RepliesPassat (B5) :: V6 Shift Knob Is Cracking
I've got a 2001.5 v6 passat w/ auto and my shift knob has this cool burl veneer on it. I think it's real wood but it's pretty thin and it's got cracks on the front and the back. I can't see any simple way to remove the stick so that I can try to glue it. How to do that. But it's a standard tiprtonic shifter ... probably the standard on that model.
View 3 RepliesPassat (B7) :: DSG Shift Knob Removal
I am trying to remove the shift knob and the steps are entirely different than the DSG knobs from the GTI; You take just the boot off (not the assembly) then underneath is a hose clamp which needs to be removed. (this is not on the GTI version); I cannot figure out how to get this clamp off; I guess you need hose clamp pliers? And then do you need a new hose clamp? Won't it ruin the clamp?
View 24 RepliesCelica :: 1986 Mk2 Supra Manual Stick Too Loose?
My 1986 Toyota celica supra stick shifter is pretty loose and I don't like it. Any way I can tighten it up?
View 5 RepliesPrius (2010-12) :: Mod The Stock Shift Knob
Do the cover on the stock knob can be taken apart, smoked, and put back together?
View 6 RepliesGTI 337/20th Anniversary :: Removing Shift Knob?
How to remove the OEM "golf ball" shifter on a 20th AE? I tried everything but it still won't budge. Is there a trick to removing it? Is it a tight press fit or does it screw on?
I have the latest edition of the Bentley repair manual and it does not cover this shifter knob.