Ford Super Duty (1999-2016) :: Intermittent Grinding / Rubbing Sound Coming From The Wheel
I have a 2000 F-250 Crew Cab with Lariate Trim package (not sure how that could be relevant to the issue, but it might be?) and auto locking Hubs. Recently, the truck has taken to making an intermittent grinding/Rubbing sound that comes seems to come from the wheels. I can not locate the sound exactly since it only happens when I'm Driving, I have never heard the sound at any speed lower than 20 mph or when the 4x4 is engaged either manually through he hubs or the selector in the cab when the hubs are in auto. All this leads me to think that I need to replace the autolocking hubs, but i'd like a second opinion (or even third) before I go to the trouble of replacing them.
View 1 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Rubbing Sound Near The Front Axle
I have a 2001 f250 7.3 4x4 today I locked the hubs, put it in 4 low and got threw some mud to go hunting fine. got back out of the woods and took it out of 4x4 unlocked hubs and went in reverse 30 yards.. Now when i drive it makes a weird sound like a rubbing sound near the front axle. What this is?
View 5 RepliesFord Super Duty (1999-2016) :: Adding Extra Set Of Wheels?
I am trying to get an extra set of wheels for my truck before we move back to Alaska to mount my studs on next winter. I have found a few used sets but then realized I have the tire pressure sensors on my truck. If I pick up a set, do I have to get ones with the sensors? Can sensors be added to the tire shop? I just really have no intel on this subject!
View 8 RepliesFord Super Duty (1999-2016) :: Weight Difference Between Single And Extra Cab?
1999 to 2002 F-250 ... As the title says, looking for accurate weight difference between single cab and xtra cab.
Looking for replies from those that have knowledge from trucks that have actually been weighed, not just speculation.
Ford Super Duty (1999-2016) :: 2006 F350 - Mounting Extra Speakers?
I have an 06 F350 regular cab. I have 4 speakers in it but I want to add more but I can't find a place for them. Finding a place to mount extra speakers? And I'm not looking to add a subwoofer for that stupid "BA BOOM BA BOOM" music.
View 9 RepliesFord Super Duty (1999-2016) :: 2002 F250 - Vibration When Letting Off Accelerator
So, I'm slowly but surely eliminating a terribly shaky front end on my 2002 F-250 7.3L 4x4. First was a new carrier joint on the front drive shaft. Didn't work much, but the shop said the darn thing was falling apart. Next thing I did was new wheel bearings and manual hubs. Less vibration for sure. But the last remaining issue, in terms of vibration, is that when I let go of the Accelerator going at any speed above 60 MPH, it makes a horrible horrible noise, and I could feel a vibration. It shakes the whole truck, but I can very noticeably feel it directly in the gas pedal. It's really only an issue during deceleration. What could it be??? Drive shaft U-joints? Torque Converter? Something else in the Front End? Something in the engine even?? I don't exactly have the funds to tackle every possible solution.
View 1 RepliesFord Super Duty (1999-2016) :: 2011 F250 - Rear End Shudder When Letting Off Gas While Stopping?
My '11 F250 stock w/airbags has a mild shudder when I let off the gas approaching a stop light. If I air the bags up to about 20 lbs it appears to go away, or at least is undetectable. I don't notice this if travelling at a higher rate of speed on a highway but only when slowing down from a lower speed (<40 mph). What this could be?
View 3 RepliesFord Super Duty (1999-2016) :: 2012 - Metallic Noise From Rear Bed Area
New 2012 SD - Is it normal? Going over road bumps, etc causes a metallic sound, kind of like you had some loose metal in the bed bounding around...except it does it when the bed is empty. At first, I thought spare tire...but it is tight. Springs making noise? My father's 2011 F-150 does not make any noise.
View 4 RepliesFord Super Duty (1999-2016) :: 2008 V10 - Consistent Metallic Buzz On Moderate Acceleration?
Over the past couple of weeks my truck has developed a pretty consistent metallic buzz on light/moderate acceleration. At first I thought it was a heat shield rattling, but I've been under it a dozen times and can't find anything loose to make the metallic buzz that I'm hearing... I can pound on several places in the exhaust system with my palm and it seems solid/connected everywhere. V10 truck??
View 6 RepliesFord Super Duty (1999-2016) :: Rubbing Noise Right Outside Front Window
I drive a 2014 F350 Platinum SRW. No matter how fast i go, there is always a rubbing noise & i can hear it right outside my front window. Its annoying & loud. The mechanics told me it was my dust seal on my front axle but they changed it & its making the same noise even worse than before.
View 1 RepliesFord Super Duty (1999-2016) :: Wheels Rubbing The Leaf Springs
This is my dads f250 build date of 9/03. I know these wheels are not the factory xl wheels. I also think they changed something with the wheel back spacing somewhere around this time. He is running 285/70/17 bfgs and is rubbing the leaf springs pretty good. He ran this same size on his previous 02 model with no rubbing. Can he get away with 1/4 spacers? What years these wheels are from? And the backspacing differences, if any. His 02 had the chrome large bullet hole style wheels.
View 5 RepliesFord Super Duty (1999-2016) :: Tires Rubbing After Installing Leveling Kit
I had my leveling kit installed today. Bilstein 2" leveling coils, adjustable track bar, 4" rear blocks, and shocks front and rear.
I have 295/70/18 tires on stock wheels that didn't rub anywhere before. Now at full lock to the left the drivers side tire just barely rubs on the radius arm. How is that possible? I was planning on getting 35s soon when these wear out but it seems like those would rub even worse.
Ford Super Duty (1999-2016) :: 2003 - Rubbing Noise While In Reverse?
I bought a nice 03 F250 V10 with apx 170k on Friday... After I got home (it was about a 4hr drive) I went to back up into the driveway and heard a loud (deep) rub noise.. Sounds like metal on metal... After a few feet or at a faster pace it goes away. I've tried seeing if it changed or went away depending on how the wheels were turned but it did not make a difference. At first I thought it was coming from the hub but now I'm thinking it could be driveshaft related..
View 6 RepliesFord Super Duty (1999-2016) :: 2011 F250 - 285/75/17 Fit Without Modification Or Rubbing?
I have a 2011 6.7L F-250 with the stock 17" rims and need new tires. Would 285/75/17's will fit without modification or rubbing?
The stock tires were 265/70/17 and were too small. I have 285/65/18's on there now without rubbing, but it is close. Going back to the 17" rim with a taller tire makes me a little nervous, as I can't check them before purchasing.
I do not want to have any rubbing or have to do any modifications (lift, spacers, etc...). I would like to keep the vehicle stock.
Ford Super Duty (1999-2016) :: 2004 - F350 Front Drive Shaft Metallic Squeal
I have a 2004 F350 Crew Cab DRW 4WD 6.0L.
The front drive shaft is making a high pitched metallic squeal while the truck is in motion. I thought it might be the universal joints but after lubricating the joints, I can still hear the squeal and it sounds like it is coming from inside the drive shaft. I also hear this squeal when I spin the drive shaft by hand.
I have quite a few questions about these drive shafts:
- What would cause a squeal from within the drive shaft?
- Are there any replaceable parts or do I have to get a new drive shaft?
- How do I identify the correct drive shaft part for my truck? Seems like there are a LOT of different models on the web.
- Are any of the aftermarket drive shafts any good? Any to avoid?
- Is this a DIY job or will I need to take it in to the shop?
Ford Super Duty (1999-2016) :: Rubbing / Grinding Noise When Turning Left Or Right
My dually has started to make a rubbing or grinding noise just about every time I make a turn, left or right. What this could be, truck has 8500 miles on it.
SD Dually
Ford Super Duty (1999-2016) :: 2000 - Front Axle - Hub Makes A Slight Metallic Grinding Noise About 1/2 Way Around
I am in the process of replacing the front hub seals so my ESOF works again. I tested both front hubs with a mityvac and neither one of them holds any vacuum at all. All the lines are good, and the pump and solenoid seem to be working fine.
I have the driver's side apart and I have a couple of questions.
What's a good source for the vacuum seal? I've checked rockauto, riff raff, and diesel o-rings. Diesel o-rings has it, but the description says it's only for 2003+ Excursions so I didn't order it.
There is no yellow o-ring anywhere on the hub. I assume that someone forgot to put this o-ring back in and this is why I don't have ESOF? I guess what I really want to know is that there isn't some 2000-specific thing where there's no o-ring, right?
After I got the hub off, I spun it around on my workbench and it doesn't sound good at all. It makes a slight metallic grinding noise about 1/2 way around. I assume this isn't normal? AFAIK these are all original parts - but the missing o-ring means to me that someone already had it apart.
There was a lot of water intrusion and rusty colored grease but nothing was dry, the needle bearings were intact and the shaft isn't scored at all where the bearing rides. I'm hoping new seals and good cleaning and it should be good as new. And then it's off to the next side.
Ford Super Duty (1999-2016) :: 2011 - Slight Rubbing On Mud Flaps Near Full Lock
I'm contemplating a 4" lift on my 2012 F250/6.2L. It sits at stock height now with 315/70R17, slight rubbing on the mud flaps near full lock.
View 8 RepliesFord Super Duty (1999-2016) :: 2003 F250 - Tire Rubbing Front Brake Line
I noticed yesterday that my tire on the driver's side has rubbed a flat spot on the rubber brake hose. I bent the metal tubing so that it doesn't rub any more, but should this be of great concern? Obviously I'd hate for it to rupture, but it looks as though it's not too bad.
View 1 Replies