Ford Super Duty (1999-2016) :: 2003 F250 - Noisy Alternator - Bearing Part Number?
I have an 2003 F250 with a nosiy alternator and need to change the bearings. I would like to have the bearings on hand before i take it apart. What is the part numbers for the bearings I need?
View 3 RepliesFord Super Duty (1999-2016) :: Both Mirror Cracked - Swapping?
So both the mirrors on my new truck are cracked. Driver side got hit, and the passenger side just doesn't respond, might just be a power thing. Anyways I'm wondering if there is any hassle to switch to a different style of superduty mirror? The 08 ones are really nice, if I can find a set for a decent price. Mine are just the basic ones, they look like half ton mirrors. I'm pretty sure they would just bolt in, and wiring really is no issue for me either. Just wondering if would encounter anything that might be an issue.
View 2 RepliesFord Super Duty (1999-2016) :: 2001 Excursion - Front End Clunk When Went Over A Significant Bump
I bought this truck a little over a year ago and have put almost 30,000 miles on it. When I bought it, it had a clunk from the front end, but only when I went over a significant bump. It was most pronounced when I, for example, hit a speed bump at an angle and the body rocked back and forth. It's steadily been getting worse and now it's fairly concerning. It happens on pretty much every bump now. Additionally, I've developed a fairly significant shimmy under braking and a vibration over 65mph. I got into a fairly scary shimmy when trying to slow down as I was going down a mountain a few weeks ago.
The other day I started getting a grinding noise from the front right. It goes away when the brakes are pressed. I don't know if the grinding noise and vibration/shimmy are related to the clunking or if they are the result of a separate issue. I have plenty of brake pad and rotor on all corners and there is no perceptible play in any of the front end components (wheel bearings, ball joints, tie rods, shock mounts, etc.). I suspected the leaf spring bushings, but I supported the truck by the frame and still got no noticeable play when jerking things around by hand.
Ford Super Duty (1999-2016) :: Vacuum Elbow Cracked Badly?
I have a V-10 in my Y2K F-250. Under the throttle body there is an elbow on a vacuum line that is badly cracked. I went to parts store and bought a heater line that fit both ends (different sizes) but isnt the exact angle of the original. It fixed the hissing vacuum leak but now it is running pretty rough. Doesnt seem to be pinched but it's definitely different. The poor performance during acceleration wasnt a problem before but is very noticeable now. Could the line being different effect the performance?
View 7 RepliesFord Super Duty (1999-2016) :: 2008 - Cracked Exhaust Manifold
My '08 S.D. (5.4) has a cracked exhaust manifold, which I've heard is fairly common. Crappy Ford design. The local dealer has them in stock (imagine that, just like the 'non-bad' coil caps from some years ago, that they were instructed by Ford to keep at least 10 on stock at all times) for the passenger and driver's side. What are the part numbers?
View 10 RepliesFord Super Duty (1999-2016) :: 2007 4x4 Hub / Bearing Assembly Part Number
I am not sure mine are done yet, but I was told by mechanic that they are failing and that the fronts aren't spinning as smooth as they should when up on the jack. They were investigating a sticky caliper at the time and said they believe heat from failing bearing caused that issue. I figured I'd do a little looking for parts pricing just incase. Does come with everything needed to change it? From reading, I found part # 73CZ-1104B is that the one?
View 6 RepliesFord Super Duty (1999-2016) :: 2007 - Transmission Filter Part Number?
2007 F250, V10. What is the part number for the transmission filter?
View 3 RepliesFord Super Duty (1999-2016) :: Orange Reflector On Integrated Turn Signal Is Cracked
I hit the trailer tow mirror on a column parking in my parking garage downtown...
The Orange Reflector on the integrated turn signal is cracked. The black housing has a little crack too, but is so minor I could just leave it.
I don't trust the parts man at the stealership...
Are the orange reflector and the black mirror housing all 1 piece? How to remove that outer housing to replace it?
Ford Super Duty (1999-2016) :: 2000 - Master Cylinder Reservoir Plastic Cracked?
my 2000 f550 master cylinder reservoir plastic is cracked from vibration and it would be good to know if it can be replaced separately than having to purchase a new complete unit.
View 2 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Heater Blow Warm For The Most Part
Sunday I bought a 2001 f250/5.4 to replace my 91 f250. I didnt drive it yesterday, but this morning on my drive to work the heater was very weak, it seemed to blow warm for the most part, but was barely pushing air even on high. I flipped it over to A/C to see if it blew any harder and it did. Does the blower motor need replace? if so why does the AC blow harder than the heater?
View 14 RepliesFord Super Duty (1999-2016) :: Rear Hub Outer Oil Seal Leaking / Replacement Part?
The rear hub outer oil seal on my 05 350 is leaking. The 350 Super Duty Twin Cab was never imported into the UAE so can I use the same seals as the Excursion or another Ford vehicle?
Failing that do we know the name and part number of a seal manufacturer whom I might be able to source from in Dubai? Ford don't make the seals them selves so there must be an alternate source for these things surely?
Ford Super Duty (1999-2016) :: 2008 - Fold Down Console - How To Remove Cup Holder Part
I was wondering how do you remove the cup holder part of the console dose it just pop off or are there metal clips or screws hidden some how?
View 4 RepliesFord Super Duty (1999-2016) :: 2014 F250 - Part Number For Tailgate Spoiler Cap
I'm trying to locate the part number (and a replacement) for the plastic piece that covers the top of the tailgate (when its shut) next to the step. It's about a 12 to 16 inch long piece of plastic which has some broken tabs on it, so everytime I drop the tailgate, it either flies out or starts to... I checked the fische online and I don't even see it in the picture. I did find some one-piece parts called "tailgate spoiler cap" but I didn't find any to fit a 2014 F-250 with the step on the tailgate. Should I just tell the wife to go hot-glue it ?
View 1 RepliesFord Super Duty (1999-2016) :: 2003 Excursion - Outer Axle Seal Installment
Do I need a special tool to put the outer axle seal on a 2003 excursion? I could make one if I new how far down it needs to be. I'm replacing the needle bearings in the back of the hubs and it looks like the last seals were not on far enough and the hub tore them up....
View 13 RepliesFord Super Duty (1999-2016) :: 2003 Excursion - Dash Vents Not Working - Just Defrost
Air is only blowing through the defrost vents. No matter what I do - try to turn vents, A/C, heat, fresh air, recirculating, etc. Assume it's a switch or fuse issue somewhere. How to fix it?
View 11 RepliesFord Super Duty (1999-2016) :: Single Steering Stabilizer (in-line) With Brackets Part Number?
I'm wanting to get a single in-line steering stabilizer for my '05 F250 4x4, but I can't seem to find any that include brackets.
I don't need a dual setup because I'm not running a big lift or big tires, but I want an inline stabilizer so that I can just leave the stock one in place.
What is the part number for one that comes with the mounting brackets?
Ford Super Duty (1999-2016) :: Rear Wheel Seal And Bearing Part Number Check
Replacing the backing plates on my rear end, figure get new inner bearings and seals in there. Bearings seem fine but cheap insurance, dont wanna pull it all off again.
When i pulled my hub off, the hub seal stayed on the housing shaft, this is normal? Just gotta pry it off there somehow?
Then new seal-TIMKEN 370247A just tap it into the back of the hub? Also is this the right inner bearings? TIMKEN NP114036
Ford Super Duty (1999-2016) :: 2001 F250 - Parking Brake Lever Part Number?
Parking brake lever for the park brake on my 2001 F250 srw. Both are rusted up but im having trouble finding the part.
View 1 RepliesFord Super Duty (1999-2016) :: 2008 F450 - Driver Side Exhaust Manifold With A Cracked Abd Broken Bolt
I got a 08 ford f450 sd in the shop with a cracked abd broken bolt in the driver's side exhaust manifold, any tips tricks on getting it out,I have everything loose but I can't for the life of me get the egr cooler out of the way to access the top bolts to the manifold so I can replace the manifold, or a link to a service manual would be great.
View 3 Replies