Elantra XD (2001-06) :: 2004 - Brake Pedal Won't Depress
I've been having a randomly recurring problem with my 2004 Hyundai Elantra for several months now. I'll be driving along and will notice that my brake pedal won't depress. When I step off of the accelerator, it is like the brakes are already engaged. Eventually, the brake pedal won't depress at all and the car acts like the brakes are fully engaged. Sometimes I can let it sit for an hour or several hours and the brakes will readjust and I can move again. So far I have replaced both calipers, rotors, 2 brake hoses and the master cylinder, but I am still having this problem. My mechanic is flummoxed. Any time I have the car towed in, the brakes release by the time it arrives and he has no problem to observe.
View 3 RepliesElantra XD (2001-06) :: Pedal Pulsates When Depress The Brake Lightly To A Stop
I have an issue that i have been trying to resolve. When i depress the brake lightly to a stop, the pedal pulsates. But if I depress a little harder it pulsates initially midway down and then it stops as i press harder to brake. (I hope this is easy to understand). so... press lightly, pulsates until I reach a stop. press firmly, pulsates briefly, then no pulsation until i reach a stop.
I have pretty much replaced everything. Calipers, rotors, pads, lnes, fluid, hardware. lugs are torqued to 100ftlbs.
Also the caliper is not sticking the problem persists even after I replaced the calipers. I am left at a total loss here. I cant think of anything else. One thing that i noticed is, the LUGS are really hot to the touch after driving it for 15 min or so.
Prius (2001-03) :: Regenerative Braking Works Intermittently When Depress The Brake Pedal
I have a 2003 Prius that I have had about 4 years. It has under 80,000 miles on it and I have the Ecrostech Scanner which I have had for about 3 years. For the time I have had the Ecrostech I have noticed times when the regenerative braking was not working when I would depress the brake pedal. I understand the regen does not work from about 7 mph and below but my system often does not work even when it is above that speed. I have not been able to force it into regen. It seems to have a mind of its own as in perhaps a faulty ecu.
View 7 RepliesGolf IV / Jetta IV :: 2001 - Brake Pedal Engages At Normal Depress Spot Then Depresses More?
2001 2.0
251,xxx km
Noticed here lately that my brake pedal is depressing further, and can go to the floor if I press it hard enough.
If I press the pedal quick (panic stop) it engages quickly and in the correct spot (I can feel the front tires almost lock up) then it depresses more almost to the floor. the brakes still work perfect however.
What should I try first?
I use my hand brake, and have pumped the brakes and pulled the handbrake to set the rear pistons in place.
I replaced the two rear calipers about a year and a half ago and bled them obviously. Have not bled the front brakes and will do that, but was just looking for more insight, and common problems, vacuum leak, etc.
Reservoir is full as well, and no brake line leaks that I know of.
Ford - Mustang :: Creep Forward When Stopped And Depress Brake Pedal Firmly
I have a 2003 Mustang. The front brakes are new, and back brakes are OK. When I stop at a stop light, and depress the brake pedal firmly, the car continues to creep forward. I have to put it in neutral or park to get the car to a standstill.
View 10 RepliesPassat (B7) :: Brake Pedal Extremely Hard To Depress
Having an issue with my brake pedal. When the car sits for long periods of time, usually overnight, the brake pedal is extremely hard to depress. I have to really press down hard in order to start the ignition. Took it into my dealership, and they actually said there was a TSB issued for something to do with the brakes. Well, evidently, they fixed it, but the issue came back almost immediately, only this time it's worse. The brake pedal firms up after 3-4 hours of sitting.
Brakes feel fine once the ignition is turned on. I was told there's no issue with driving it, but I'm not so sure I trust what I was told.
Ford Super Duty (1999-2016) :: 2001 F350 - Parking Brake Pedal Is Extremely Hard To Push
I have a 2001 F-350 Diesel 4x4 crew cab 8ft bed dually 7.3 diesel 6 speed. The issue is that the parking brake pedal is extremely hard to push. One day it pushed down and ratcheted into a locked position as normal and the next day I couldn't push it more than an inch down. I have rear disc brakes with internal drums in the rotors for the parking brake assembly. I replaced the shoes and hardware (which were fine) and I still have the same issue. I removed the front single cable from where it splits into the two rear ones and the foot pedal depresses smoothly and with the touch of a finger with no load on it. What else is it? The only other thing is one of the rear cables unless I am missing something?
View 5 RepliesPrius (2010-12) :: Slip Indicator Light On Then Off After Depress Brake Pedal
So I noticed this has happened a few times.. If I press on the brake pedal too hard, the indicator light will come on and then turn off a few moments after I depress the brake pedal. This has happened when the car is stationary as well as when I was coming to a stop, it's happened maybe 5 times since I picked the car up a few weeks ago. Is this normal behavior or an indication of a problem? Just an FYI, I'm not talking about when the indicators light up when first starting the car.. This is tied strictly to pressing the brake pedal hard.
View 8 RepliesAccent MC (2006-11) :: Brake Pedal Won't Depress - Seized Clutch Bearing
2007 Accent pedal won't depress. Bearing making noise for a few months. Is tranny snout toast or is it fixable?
View 2 RepliesPhaeton :: High Pitched Squealing Noise Every Time Depress Brake Pedal?
So - I'm sitting at my VW dealership, hoping that their can figure out why I'm getting a high pitched, miserable squealing sound, every time I depress my brake pedal. It's metallic sounding, and with the history of brake issues I've had in owning other VW models, I just figured it was the brake pads they use. Sounds like their tech believes it is an issue with the tires??? I've got an 04 Phaeton with roughly 38K miles on it - and it's supposedly "certified"....
View 6 RepliesElantra MD (2010-15) :: 2013 - Brake Pedal Rubbing / Friction When Depress Lightly
New 2013 Elantra owner here.. When initially depressing the brake pedal lightly (before the brake pads engage, usually in stop-and-go traffic), I can feel a rubbing sensation coming from somewhere in the pedal assembly. If it's quiet, I can also hear a groaning sound. This definitely isn't a pad/rotor issue, rather something closer to the pedal itself and inside or near the cabin.
Took it to the dealership and after some coaxing and insistence that it wasn't "normal," they finally said it was the brake switch and replaced it. Seemed to alleviate the problem for a week or so, but now it's back!
Lexus GS 2006-11 :: 2007 GS350 AWD - Brake Pedal Stiff And Doesn't Depress All The Way Down At Startup
Have an 07 gs350 awd and lately the pedal feels stiff and doesn't depress all the way down at startup. Sometimes the steering wheel will go back up as if I have just stopped the car and occasionally I will get the message on the dashboard that I need to press the brake pedal at startup even though I am doing that. Dealership claims they can't duplicate problem and don't know what it could be.
View 3 RepliesCamry :: Adjusting Parking Brake (E-Brake) Pedal On 6th Gen Toyota
I have a 2010 toyota camry that needs a parking brake adjustment. the car still stops with the transmission even if the parking brake pedal is pressed down. I changes the pads in the back and it seems to be a little better, but it's not as good as other Camry's I've been in. Where to look as far as the adjustments go? and possibly how if it's not the usual method.
View 4 RepliesFord 6.7L Power Stroke Diesel :: Brakes Would Not Depress When Parking The Truck
I was parking my truck and the brakes wouldn't depress and I almost crashed into another vehicle that was parked.
View 14 RepliesFord 6.0L Power Stroke Diesel :: Parking Brake - Pedal Goes Almost To The Floor Without Any Response
Ever since I've had this truck my parking brake has acted like this. My buddy has an '03 and his acts the same, but I figured I'd ask the question.
9 times out of 10 to set the parking brake, the pedal goes almost to the floor and doesn't seem like it really does anything. The other 1 out of 10 it goes half way and feels like it actually sets. Is this normal?
Ford Super Duty (1999-2016) :: Parking Brake Pedal Won't Stay Down
When I parked my truck at work this morning, I pushed the parking brake pedal down like always, but it popped back up. I didn't pop all the way back up, it stayed down about 1/4 of the way. Several tries yielded the same results.
Since I'm at work, I didn't have any time to crawl under there are investigate. I'll do so tonight when I get home, or maybe tomorrow. Kinda sounds like the locking "teeth" mechanism may be misaligned?? Since it doesn't come all the way back up, I'm hoping the mechanism isn't totally broken.
Ford Excursion :: 2000 - Parking Brake Light On?
So my 2000 Ex started showing the parking brake light as if the parking brake was on...however it is not. How, or what do I need to do to fix it?
View 14 RepliesFord Excursion :: Parking Brake Light On Intermittently?
I've been having a problem lately where I'm driving down the road and the brake light comes on and starts binging. I stop push the parking brake and release it a few times, then the light goes out and I'm on my way. Sometimes when I first release it the light doesn't extinguish and sometimes it is never on. I'm guessing there is a switch somewhere for the parking brake that isn't working so great. Is it around the pedal or somewhere in the brakes themselves? Is this a typical problem?
View 14 RepliesFord Excursion :: Parking Brake Cable Snapped?
When I set the parking brake last night, there was a loud pop and the pedal suddenly went soft to the floor and would not spring back when I pulled the release. The pedal doesn't spring back up when I pull the release lever, but I was able to pull it back up by hand to get the dash light to go out. That works, but without the tension from the brake cable the pedal works back down and the dash light comes on.
When I got out of the driver's seat, there was a cable laying on the ground right under the front door. The cable snapped right in front of a metal cable joiner. What is involved in fixing this?