Ford Super Duty (1999-2016) :: 2006 - A/C Clutch Seized - Replace Bearing And Pulley?
i replaced my a/c compressor on my 2006 f-250 2 yrs ago but had not refilled with r134..only the pag oil. Now i decide to refill seeing my wife uses the truck and compressor would not engage, i was able to bypass it by removing relay and jumping it with a paperclip. Compressor started up but seems to have seized on pully. the pulley seems fine and still turning freely. I can no longer turn it manually when truck is stopped and i could before i jumped it. could the clutch only be replaced or does the bearing and pulley have to be replaced
View 10 RepliesLexus GS 2006-11 :: 2007 GS350 AWD - Brake Pedal Stiff And Doesn't Depress All The Way Down At Startup
Have an 07 gs350 awd and lately the pedal feels stiff and doesn't depress all the way down at startup. Sometimes the steering wheel will go back up as if I have just stopped the car and occasionally I will get the message on the dashboard that I need to press the brake pedal at startup even though I am doing that. Dealership claims they can't duplicate problem and don't know what it could be.
View 3 RepliesAccent MC (2006-11) :: Clutch Gone Out - Bearing Noise
My daughter was driving to work a couple of nights ago and ran over what she thought was a 2x4 blowing out the R/F tire. The next morning we got a new tire put on. She drive it back to work and when she came home, she said the engine was making a funny noise when she pushed the clutch in. I opened the hood and had her start it. No funny noises. I then had her push the clutch in and as soon as the hydraulic cylinder started to move out, I could hear a bearing noise which I attributed to the throw out bearing. I figured I would need to be putting in a new clutch soon and wondered why I hadn't done it when we put the new engine in last year. The next night, she called me from work and said the clutch didn't work and she coasted into her parking lot space at work. She said she tried to shift it into gear but it wouldn't, either with the engine running or not running. We put it on a trailer and towed it home. I think the running over the board and the possibility of the throw out bearing is just a coincidence but ???? The clutch cylinder does push the rod and throw out bearing fork forward but now no noise. Total failure of the T/O bearing??? This car has really been a test of my patience and wallet.
View 3 RepliesSubaru - Outback :: Whining Noise When Depress The Clutch Pedal
I've got a 2008 Subaru Outback with a 5-speed standard, 50K on it. Lately, when I depress the clutch pedal, it makes a whining noise, in any gear or even in neutral. It goes away when I release the pedal. But it also stops making the noise when the engine warms up. That's the part that confuses me.
View 4 RepliesFord Ranger / B-Series :: 1997 - Clutch Pedal Hard And Could Not Depress It
This is unusual. After driving into town for new tires, the clutch pedal was hard and I could not depress it after the tire tech parked the truck. It did finally depress with a pop, though the pedal functioned there after the clutch did not function properly.
At times it seemed to be ok at other times it seemed weak. I stopped by Autozone and checked the fluid, seemed low and I added some. Continued home not completely confident that I would make it. Had to make one stop along the way.
Once again the clutch pedal was stuck at the top and would not depress. I finally slid the safety switch up the clutch shaft to start the truck, when the engine started the pedal depressed. I was able to continue home but the clutch is not functioning properly.
Nissan :: 1997 - Growling Noise When Depress The Clutch Pedal With Engine Running
For a little wile now, I have had a growling noise when I depress the clutch pedal with the engine running. It mostly does it when the truck is cold and goes away after a few uses but was getting worse and taking longer to go away. The transmission shifts normally, the clutch operates normally and it does not make the noise if I put the transmission in neutral and let the clutch out. So I'm thinking dry throw out bearing.
I did an oil change Monday, and while it was up on the ramps, I decided to check the transmission oil level, I mean its got a 181k on it so its about time to check, right. Bone dry. I put about 2 qts of gear oil in the transmission that the service manual says has a 4 1/4 pint capacity. I took it out for a drive today and the noise is gone. Go figure.
I only drive the truck one or two times a week, sometimes less so in a couple of weeks I will check the transmission again for a leak, but there was no sign of a leak when I was under there Monday. But is still shifts smoothly, makes no noise.
Accent MC (2006-11) :: Clutch Engages When The Pedal Is Right At The Top
Just bought a 2009 Accent 5 speed I have 2500 miles on it .The clutch engages when the pedal is right at the top. Is there an adjustment on this vehicle I would prefer it to engage about mid stroke.
View 9 RepliesPassat (B7) :: Brake Pedal Extremely Hard To Depress
Having an issue with my brake pedal. When the car sits for long periods of time, usually overnight, the brake pedal is extremely hard to depress. I have to really press down hard in order to start the ignition. Took it into my dealership, and they actually said there was a TSB issued for something to do with the brakes. Well, evidently, they fixed it, but the issue came back almost immediately, only this time it's worse. The brake pedal firms up after 3-4 hours of sitting.
Brakes feel fine once the ignition is turned on. I was told there's no issue with driving it, but I'm not so sure I trust what I was told.
Elantra XD (2001-06) :: 2004 - Brake Pedal Won't Depress
I've been having a randomly recurring problem with my 2004 Hyundai Elantra for several months now. I'll be driving along and will notice that my brake pedal won't depress. When I step off of the accelerator, it is like the brakes are already engaged. Eventually, the brake pedal won't depress at all and the car acts like the brakes are fully engaged. Sometimes I can let it sit for an hour or several hours and the brakes will readjust and I can move again. So far I have replaced both calipers, rotors, 2 brake hoses and the master cylinder, but I am still having this problem. My mechanic is flummoxed. Any time I have the car towed in, the brakes release by the time it arrives and he has no problem to observe.
View 3 RepliesFord Excursion :: 2001 - Parking Brake Pedal Will Not Depress
2001 Ex limited 4x2 w/50k miles-- The parking brake pedal will not depress...at all....not even a millimeter. Feels like it is "locked".
View 2 RepliesPrius (2010-12) :: Slip Indicator Light On Then Off After Depress Brake Pedal
So I noticed this has happened a few times.. If I press on the brake pedal too hard, the indicator light will come on and then turn off a few moments after I depress the brake pedal. This has happened when the car is stationary as well as when I was coming to a stop, it's happened maybe 5 times since I picked the car up a few weeks ago. Is this normal behavior or an indication of a problem? Just an FYI, I'm not talking about when the indicators light up when first starting the car.. This is tied strictly to pressing the brake pedal hard.
View 8 RepliesElantra XD (2001-06) :: Pedal Pulsates When Depress The Brake Lightly To A Stop
I have an issue that i have been trying to resolve. When i depress the brake lightly to a stop, the pedal pulsates. But if I depress a little harder it pulsates initially midway down and then it stops as i press harder to brake. (I hope this is easy to understand). so... press lightly, pulsates until I reach a stop. press firmly, pulsates briefly, then no pulsation until i reach a stop.
I have pretty much replaced everything. Calipers, rotors, pads, lnes, fluid, hardware. lugs are torqued to 100ftlbs.
Also the caliper is not sticking the problem persists even after I replaced the calipers. I am left at a total loss here. I cant think of anything else. One thing that i noticed is, the LUGS are really hot to the touch after driving it for 15 min or so.
Phaeton :: High Pitched Squealing Noise Every Time Depress Brake Pedal?
So - I'm sitting at my VW dealership, hoping that their can figure out why I'm getting a high pitched, miserable squealing sound, every time I depress my brake pedal. It's metallic sounding, and with the history of brake issues I've had in owning other VW models, I just figured it was the brake pads they use. Sounds like their tech believes it is an issue with the tires??? I've got an 04 Phaeton with roughly 38K miles on it - and it's supposedly "certified"....
View 6 RepliesFord - Mustang :: Creep Forward When Stopped And Depress Brake Pedal Firmly
I have a 2003 Mustang. The front brakes are new, and back brakes are OK. When I stop at a stop light, and depress the brake pedal firmly, the car continues to creep forward. I have to put it in neutral or park to get the car to a standstill.
View 10 RepliesElantra MD (2010-15) :: 2013 - Brake Pedal Rubbing / Friction When Depress Lightly
New 2013 Elantra owner here.. When initially depressing the brake pedal lightly (before the brake pads engage, usually in stop-and-go traffic), I can feel a rubbing sensation coming from somewhere in the pedal assembly. If it's quiet, I can also hear a groaning sound. This definitely isn't a pad/rotor issue, rather something closer to the pedal itself and inside or near the cabin.
Took it to the dealership and after some coaxing and insistence that it wasn't "normal," they finally said it was the brake switch and replaced it. Seemed to alleviate the problem for a week or so, but now it's back!
Prius (2001-03) :: Regenerative Braking Works Intermittently When Depress The Brake Pedal
I have a 2003 Prius that I have had about 4 years. It has under 80,000 miles on it and I have the Ecrostech Scanner which I have had for about 3 years. For the time I have had the Ecrostech I have noticed times when the regenerative braking was not working when I would depress the brake pedal. I understand the regen does not work from about 7 mph and below but my system often does not work even when it is above that speed. I have not been able to force it into regen. It seems to have a mind of its own as in perhaps a faulty ecu.
View 7 RepliesGolf IV / Jetta IV :: 2001 - Brake Pedal Engages At Normal Depress Spot Then Depresses More?
2001 2.0
251,xxx km
Noticed here lately that my brake pedal is depressing further, and can go to the floor if I press it hard enough.
If I press the pedal quick (panic stop) it engages quickly and in the correct spot (I can feel the front tires almost lock up) then it depresses more almost to the floor. the brakes still work perfect however.
What should I try first?
I use my hand brake, and have pumped the brakes and pulled the handbrake to set the rear pistons in place.
I replaced the two rear calipers about a year and a half ago and bled them obviously. Have not bled the front brakes and will do that, but was just looking for more insight, and common problems, vacuum leak, etc.
Reservoir is full as well, and no brake line leaks that I know of.
Mazda - Tribute :: 2006 - Cannot Get Pedal To Depress When Trying To Move From A Stop
I can't get the pedal to depress when trying to move from a stop. I was doing fine until this evening when heading back to my hotel following a theater performance. When attempting to accelerate from a stop light . . . NOTHING. I put the car in neutral and stomped on the pedal a few times and it finally engaged. Happened again when trying to merge onto the highway. As long as I keep pressure on the pedal it is fine, but as soon as I release it sticks in the "up" position. Naturally, I'm away from home, the roads are icy, and it's Sunday!
View 4 RepliesAccent MC (2006-11) :: Air Noise When Depressing Brake Pedal
Just noticed this the other day, when depressing my GF's 2011 Accent's brake pedal it made a low hissing sound, it would go away when you took your foot off the pedal, you would never hear this with the radio on, but it was enough to make me think it could be a concern.
Drove the car and it didn't affect the brake permormance, but the longer this goes, I can't imagine this being a good thing.
Car is 3 years old, and has 80-20 city/hwy driving under it.