Ford 6.0L Power Stroke Diesel :: 2004 - IPR EGR Delete Done / Correct ID
I am going to have an IPR EGR delete done. Having a hard time telling whether I have the round or square EGR. Looking on the passenger side anywhere to look specifically so I make the correct ID. Want to order the correct one. They said build date is not a good way to ID.
View 9 RepliesFord 6.0L Power Stroke Diesel :: Passing Emissions With EGR Delete?
Looking at an EGR delete in the very near future. Any problems passing emissions with a full delete?
View 14 RepliesFord 6.7L Power Stroke Diesel :: How To Delete Traction Control
How to completely turn it off, I got nothing so far. I cant do it with my H&S, I have access to ford IDS which is also unable to turn it off. The only thing I have found to work is unplugging a wheel speed sensor, which sets off dash lights... Im thinking of finding a body control module without advancetrac.
View 14 RepliesFord 6.0L Power Stroke Diesel :: Lower Boost After EGR Delete
Some people say it's normal to lose some boost after the delete, some say it's not and you need a tuner. Before the delete, I could regularly see around 28-29 psi on the factory gauge if I jumped on it. Now, I see about a max of 20-21. I have no leaks that I can find and the truck runs just as it did before. I still have my EGR plugged in laying on top of the engine and don't have a check engine light-yet. Is there a definitive answer as to how to fix this or is it really considered normal to lose that much boost after a delete? I don't really want a tuner because I'm not looking to add HP, but if that's what it takes, then I need to save up. I also read somewhere it can depend on the strategy.
View 14 RepliesFord 6.7L Power Stroke Diesel :: 2013 - Should EGR Delete Kit Or Unplug?
I am looking into getting the full deletes on my 2013 F250 6.7 and using the H&S Mini Maxx Race Tuner unlocked. I was told by my local Diesel Performance Shop I should just unplug the EGR and turn it off by the Tuner rather than investing in the delete kit.
He advised me it would be easier to plug it back in and turn it back on in case I need to take it back to the Dealer for any warranty work He advised me no advantages any way and works the same way. I will be putting on the H&S race tuner, S&B CAI, FLo Pro 5" down pipe back w/ no muffler and UREA delete.
Ford 6.0L Power Stroke Diesel :: 2006 - Stealth EGR Delete?
I am planning on doing a stealth egr delete on a 2006 6.0. What is the proper procedure? Is there a scoop in Y pipe that needs to be eliminated? Am I going to see a CEL? Am I going to need a tuner to clear CEL and codes?
View 10 RepliesFord 6.0L Power Stroke Diesel :: SCT EGR Delete And CEL Light - Code P1000
I'm brand new 6.0 owner. I am going to be performing many of the bullet proofing steps including plugging off of or a complete delete of the EGR cooler. I've read that the SCT tuner will turn off the CEL light and stop the ECM from operating EGR function.
What I can't find for sure is will I get a code P1000 (drive cycle not completed) with EGR turned off. Here in Seattle if you have a code P1000 stored you will not be allowed to complete emissions testing to get your tabs renewed. I'm guessing it does not set P1000.
Ford 6.0L Power Stroke Diesel :: 2003 F250 - No Start After EGR Delete
Just did an egr delete, oil cooler, icp sensor and exhaust on an 03 f250 6.0l. got it all back together and it cranked up and ran for about 30 seconds then stumbled and died. read to pull out the ipr sensor and check it and it had a piece of debris on it covering the screen. took of the debris and still no start.
View 6 RepliesFord 6.0L Power Stroke Diesel :: After EGR Delete Now Got Five Exults Codes And Running Bad?
Truck ran good for about a week now it has five exults codes and runs like crap I know I need a programmer but do you think I messed something up.
View 1 RepliesFord 6.0L Power Stroke Diesel :: Will EGR Delete Turn On Check Engine Light?
If doing a EGR delete on a early 2004 6.0 will turn on the check engine light? I was going to leave the valve in place and harness connected, I was just looking to add durability to the truck so don't want to use a tuner but also don't want the engine light on, I seen conflicting reports that it may or may not turn on the light!
View 3 RepliesFord 6.0L Power Stroke Diesel :: How To Change Boot Or Hose On Egr Delete Tube
How to get the boot or hose off the egr delete tube without having to tear everything apart? mines leaking i have new hose to replace just not sure how to get the old one off...
View 7 RepliesFord 6.0L Power Stroke Diesel :: 2005 - Engine Started Surging - EGR Delete
A few weeks ago I got in my 2005 EX and started for work. As I idled in traffic, the engine started surging (it had never done this before). So I took it right to Ford and dropped it off before it got worse. Of course, they couldnt look at it until Monday (this was a Thursday), so I had to get a rental.
I get the call on Monday that the surging problem was an injector, but covered by my warranty. But, it seems that my EGR cooler was bad, but even more important was my blown head gasket.
WHAT?! My truck did NOT have a blown head gasket when I dropped it off. But thats besides the point. There was much back and forth between Ford and my warranty company, but finally I got them to cover the head gasket.
But, I had to pay for the EGR cooler. So I asked the Ford mechanic if I could supply him with an upgraded cooler, so I wouldn't have this issue in the future. He said no problem. I then told him I was going to buy a Bulletproof and he said no, get a delete kit. He said "I've done a number of these, and its really the best solution.". He even HEAVILY recommended the ADT Delete kit. He even said that since I have a 2005, we can just leave the EGR valve hooked up and I wouldn't have a CEL issue.
Fast forward several days. I picked up my EX last night and... CEL is on. I called and spoke to the mechanic and he told me that I must have an upgraded program, and that my only option is a tuner to turn off the EGR completely. He also told me that I don't need an expensive SCT or Bullydog just for the EGR.
Anyways, with all of the above setting of the stage complete, just wondering what my best option is here... Is there a simple/cheaper tuner I can use to just disable the EGR? Is it worth the money to get a more expensive tuner? For the most part, this is my daily driver and I don't need a performance or towing tune. I wouldn't mind better mileage, though
Ford 6.0L Power Stroke Diesel :: Error Code P0400 After Doing Stealth Egr Delete
I just did a test drive with my 04 6 liter, I did the stealth egr delete. I had a P0400 error code any concern?
View 14 RepliesFord 6.0L Power Stroke Diesel :: Coolant Leak - EGR Delete Hose Replacement
Had a coolant leak I finally traced to the rubber hose on an egr delete (previous owner installed, not sure of brand). Looks like the jackwagon who installed it cranked the clamps way too tight and they eventually split the hose. I have a piece of heater hose that looks like the right diameter and cut to size should fit fine. I guess I am just looking for some reassurance that it would be ok to use in that situation...
View 3 RepliesFord 6.0L Power Stroke Diesel :: EGR Delete - Gas Engine Exhaust Rumble / White Smoke
After a couple of setbacks, including forgetting to install 3 out of the 4 orings on the oil cooler, I got the IPR Gen2 delete installed. I have a couple of issues since getting it started. I have low boost, I know the up pipe for the turbo is seated well, really surprised about that. However, the exhaust pipe may have a slight leak, but not positive. Finally, the last on this issue, I have a ripped MAP hose that I'm going to replace.
Next issue is that I hear what almost sounds like a gas engine exhaust rumble from the front of the truck. What it could be? I had white smoke initially coming out of the exhaust, but it cleared up after getting everything up to temp and taking it for a ride down the road. On a side note, the leak that I had from my previous thread seems to be gone now.
Ford 7.3L Power Stroke (1999-2003) :: 2001 F350 - No Power After EBPV Delete
2001 F350 just rebuilt the turbo, did the EBPV delete now no power.
View 5 RepliesFord 7.3L Power Stroke (1999-2003) :: Turbo Is Out - EBPV Delete
While my turbo is out I decided to delete the EBPV. I removed the butterfly and rod, & pounded in some 3/4 inch freeze plugs. Are there any mods that need to be done to the pedestal, or can I just leave it the EBPV plunger unhooked? It's not leaking, but will it leak if left unhooked? Or do I have to gut it and tig weld the oil gallery's
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Fuel Bowel Drain Delete Or Plug Up?
My fuel bowel drain valve is leaking again. I plan to do the hutch mod in the next month or so. Have the kit already. So I can't do the fuel bowel delete yet. it seems one of the mount holes for the drain Valve is stripped. The top rh screw won't snug up. I swapped out the orings and it still leaks. I'm sure it's from that screw. So I'm thinking about a flange bolt and an oring from the inside of the fuel bowel. It's going to be a temporary fix.
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: F350 - EBP Delete / Truck Won't Make More Than 3 PSI Of Boost
I bought a 99 f350 truck. it has a van turbo and exhaust back pressure delete. The truck wont make more than 3 PSI of boost. Ive got a p1690 wastegate actuator circuit code. unplugging the waste actuator does nothing. With the van turbo, is the actuator required? Is this code stopping the ecu from fueling and creating boost? I did a cylinder balance test, and cylinder 8 failed. Is a single injector not quite balanced enough to make it not boost past 3 psi? The turbo appears brand new (previous owner said it was), charge pipes hold pressure (tested), EBP Sensor tube is clean (shows up to 24 psi). I tested the wastegate actuator, OnDemand5 says if its over 50 ohms, its bad and replace it. its 69.5 ohms. Again, i dont want to replace it if i dont have to, as its not being used (no wastegate on van turbo), but if the ecu is preventing it from spooling because of the solenoid, ill change it.
View 14 Replies