Cherokee :: Passenger Side Brake Light Won't Engage When Brake Pedal Pressed
I own a 04 Grand Cherokee and have recently had problems with my passenger side brake light. Now the light itself does work under normal running light conditions, but when I go to press the brake pedal it doesn't engage the bright brake light. Drivers side works fine and so do all my other lights, I replaced the bulb to no avail, and am now currently looking into replacing the bulb socket.
View 1 RepliesLexus GX 2010+ :: Brake Pedal Have A Slight Modulation Or Vibration While Pressed
To all 2014 and 2015 GX 460 owners, does brake pedal have a slight modulation or vibration while press it. Feels like ABS but not as strong pumping action.
When I step on the brakes the first time feels normal and then I let go of the brakes, then I press it the second time that is when I feel a slight modulation or vibration of the brake pedal.
Lexus ES 2007-12 :: 2010 ES350 Won't Start - Brake Pedal Couldn't Be Pressed Down
My wife called and said her ES350 couldn't start. I told her to wait 5 minutes and tried again. It still wouldn't start.
So I went there and tried to start the car. My first try did not work either. I noticed that the brake pedal couldn't be pressed down. It was quite stiff. So I pressed hard on the brake pedal and tried again. This time it started. It has been working fine since then.
Prius (2010-12) :: 2015 - Solid Brief Single Click When Brake Pedal Pressed / Released
We have a new 2015 Prius with 6k on it and we are noticing one solid brief single click when the brake pedal is pressed and/or released. It doesn't happen every time (just some of the time) but it is only noticeable at slow speeds.
View 19 RepliesElantra MD (2010-15) :: 2012 - Clicking Sound When Brake Is Pressed / Depressed
I have a 2012 Elantra limited. About 2 weeks ago I've started to hear a clicking noise coming from the gearbox when brake pedal is pressed and let go. This only happens when the car is at standstill. I took it in for service today and sales rep said its a normal clicking noise and his sisters car makes same sound. He said its an actuator motor engaging to allow the car to shift when brake is pressed. The thing is, the clicking was never there before or maybe not so loud. So what should I do? Car is still under warranty, should I demand for them to replace the actuating motor? Maybe call Hyundai and complain that they said the noise is normal ?
View 4 RepliesToyota - Camry :: 1999 - Brake Light Comes On Sporadically / Pedal Needs To Be Pressed Down Farther
I have a 99 Toyota Camry and recently the breaklight has been coming on and off sporadically. I assumed I had done some damage to my E-break, as the other week I tried to back out with it on (cut me some slack, I just moved to PA after having only really driven in FL lol). I wasn't worried about it since I didn't notice any issues with my breaks, however the last few days I randomly have to press the pedal down almost to the floor to come to a full stop. There doesn't seem to be any consistency to this, sometimes it happens when the light is on but usually not. It does it both when I am stopped (causing me to move forward slightly till I depress it farther), sometimes when I am stopping normally, both when I'm going straight and right after turning, ect.
I checked my break fluid level and it is at the minimum line so I doubt that is the issue. I did some research and saw many saying that it was likely just air in the lines and that the system needed to be bled. But some also mentioned replacing the master cylinder so I wanted to see what response I might get on here (I don't know very much about cars myself).
Honda - Accord :: 1999 - Engine Dies When Pedal Pressed Down / Revs And Then Quits When Pedal Is Pressed Slowly
Ok, did an intake manifold cleaning on my 99 Accord the other day, and now I have problems...
Long story short, some time ago my car started to have a very rough idle. Took me awhile to find the problem. Turned out the air hose, between the filter and throttle body, had developed a big hole on the underside. So I replaced it and while I was at it used some throttle body cleaner, spraying into the intake manifold chamber. Lot of junk blew out the tailpipe. The car ran much better, but the idle could still be a little rough. I ran it that way for awhile, and finally the other day decided there was probably still some junk in there and it was time to really clean it out. So I took ff the throttle body and intake manifold housing. There was a lot of junk in there! The small intake on the passenger side was completely clogged shut. (I understand this isn't surprising on these cars.) I used a bunch of rags and 2 cans of Valvoline throttle body cleaner and a lot of elbow grease and cleaned it out. I was thinking to myself that whatever I didn't get with the rags flushed through OK, but I didn't want to take the whole intake manifold out.
So I put it all back together. (I took a video before I started, so I'm pretty sure it's all back together right.) But now I have problems. The car starts. It idles fine mostly, but can be a bit rough. But the trouble starts when I put the pedal down. If I do it in Park, well, if I push it quick the engine just dies. If I push it slow, the engine revs then quits, revs and quits, over and over. Similar if it's in gear. If I push it hard, the engine stalls. If I push it gentle, it revs up, but chugs along a bit.
I've run some seafoam through it, thinking it was clogged up with all that junk, and sure enough, lots of smoke comes out, but nothing is improving so far. What have I done wrong?
Elantra MD (2010-15) :: Brake Pedal Is Spongy
I have a question about the bleeding the brake? When I washed my E, I usually spray the wheel and the brake part. I don't know it is a good idea or not. Recently, I felt like I have to step further on the brake pedal to apply the brake.
The force is there and Brake assist is still in effect if I step fast enough. I just felt like the brake pedal is spongy. My E is on 36k right now. Do you think wash the wheel often will cause the problem to brake line?
I have confirmed that my Gf's Elantra is easy and ease to brake than mine. At the mean time, her brake fluid is darker than mine. My brake fluid is full and clear. Maybe I should not wash the wheel more often. Or maybe I get OCD too much?
Elantra MD (2010-15) :: Knock Under Car When Step On Brake Pedal
About 9/10 times when I step on my brake pedal (speed has not made a difference) I can hear and feel a hard knock under my car by my resting left foot. Started a few weeks ago. Haven't had work done to my brakes since May 2015 so I am thinking it is unrelated. What the issue might be?
View 2 RepliesElantra MD (2010-15) :: Brake Pedal Vibration At Various Times
My friend got her front brakes and rotors replaced a few days ago and now the brake pedal is vibrating at various times. It happens when slowing down and at a complete stop. Sounds like the ABS is kicking in to me, BUT is also does it sometimes when driving at low speeds (under 40mph) without pressing the brake pedal. No loud clicking noises, just a quick steady vibration felt at the brake pedal/flooboard.
The service was not done at Hyundai dealership. She is out of town at the moment so we haven't had a chance to take it to the shop yet. She called, they played dumb apparently. I don't know enough about Hyundais to diagnose.
Elantra MD (2010-15) :: 2016 - Brake Pedal Too High
I purchased a new 2016 Elantra about a month ago. I like the car although the driving position took a little bit of getting used too. Anyways, after 2000 miles my ankle has begun to hurt due to the height difference between the gas and brake. Is there any way to lower the brake closer to the floor to make them a bit more even?
View 5 RepliesElantra MD (2010-15) :: Brake Pedal Hard To Push Down Before Starting Car
I have the limited with the push start. In order to start the car, you have to push the brake in so far and then push the push button. Lately the brake pedal is really hard to push down after its been sitting for an extended period. Once its started, all is fine. Its almost like I've pumped it a few times first, but its not the case.
View 11 RepliesElantra MD (2010-15) :: Click Coming Through Shifter When Brake Pedal Is Down
I've noticed, lately on my girlfriend's 2013 with auto trans, when the brake pedal is down, and then pumped, I can hear and feel a click coming through the shifter. It happens in all gears.
View 12 RepliesElantra MD (2010-15) :: Strange Vibration Through The Brake Pedal When At A Complete Stop
I bought a new 2012 Elantra in March. Every so often I get a strange vibration through the brake pedal when I'm at a complete stop (red light/stop sign). It happens intermittently and I can't narrow down any exact cause. It happens when the engine is cold, fully warmed up, A/C on, A/C off, only been driving for a few minutes or driving for a few hours. No system lights come on. I've taken the car to the dealer twice and discussed this with them. They've not hooked it up for any diagnostics as yet. I don't think it's a vacuum line, engine or transmission issue because it is intermittent. I also don't think it's a defective engine/transmission mount. Could it possibly be the ABS module?
View 7 RepliesElantra MD (2010-15) :: 2014 - AC Blowing Hot From Driver Side And Cold Air From Passenger Side
Where the Air Door Actuator is located in the Elantra 2014, and How to reach it?
I want to check it as my AC is blowing Hot air from driver side and Cold air from passenger side.
I read that there are 2 of them, one for temp control and another one controls where the air goes, one at the passenger side and one at the driver side...
Which one should i start with, where is it located, and how to reach it?
Elantra MD (2010-15) :: AC Blowing Hot From Driver Side And Cold From Passenger Side
My 1.8 2014 Elantra AC started blowing Hot Air from Driver Side and Cold from Passenger side and i noticed this after a battery problem. It all started when battery problem, suddenly both sides warm ac, i took it to a mechanic, he said nothing to do with battery and said it is a freon problem, he fixed it for 1 day or 2, and i went changed the battery, then suddenly, one side hot and one side cold.
Things i tried:
1. Removing AC fuses for 1 hour
2. Removing AC fuses while car on and then turn off car and replace fuses
3. Changed car filters
4. Hot cold hot cold switching technique
5. No freon leakage
Temperature here is around 120 degrees so you can imagine!
Elantra MD (2010-15) :: 2013 - Brake Pedal Rubbing / Friction When Depress Lightly
New 2013 Elantra owner here.. When initially depressing the brake pedal lightly (before the brake pads engage, usually in stop-and-go traffic), I can feel a rubbing sensation coming from somewhere in the pedal assembly. If it's quiet, I can also hear a groaning sound. This definitely isn't a pad/rotor issue, rather something closer to the pedal itself and inside or near the cabin.
Took it to the dealership and after some coaxing and insistence that it wasn't "normal," they finally said it was the brake switch and replaced it. Seemed to alleviate the problem for a week or so, but now it's back!
Elantra MD (2010-15) :: Brake Pedal Gets Super Firm When Hit Rough Road At Speeds
It could be the ECS kicking in or something but here's what I feel..... when hitting a rough patch of road at I'd say 25 miles an hour or greater and applying the brake over that rough patch of road for what ever reason, my foot is on brake pedal normal and it feels like the pedal gets ultra firm (opposite of pedal diving to floor if you lost brakes) or the feeling is like the brake pedal is pushing back against me, like the car is taking the brakes off on me for a brief second.....its a weird feeling and only happens on rough road when I'm at speed and have to hit brakes, all other braking times it doesn't do this
Good example is coming to a stop at a certain stop light that's got choppy asphalt right at the stop light line.....light turns yellow and I'm at speed and have to brake to stop for the light, it hit the rumbly road and feels like the pedal doesn't want me to brake and gets really firm, I stop and all, but then again makes me worry, because if I had to really stop fast and hard......would I ???
No alarm or alert lights come on, so I don't know ....
Car's got 8,000 miles on the clock ....
Prius (Gen 3) :: Chirping Noise When Brake Pedal Pressed
I was wondering if this problem is the "Barking" noise that keeps coming up the search or is it another problem. I will include a link to the video down below.
To start off, the Prius is 2010 Prius II and has 120k miles on it. Great Car. Only other problem was AC compressor dying at 90k.
The chirping noise happens when the brake pedal is pressed and does not go away until the release the pedal. It makes the noise regardless of whether the car is on or off.
It makes the noise when the car is stopped and or when the mechanical brake engage at between 0 and 6 mph.
Noise does not occur when the brake switch is removed. Not valid solution since the brake lights will stay on. It does not affect the performance of braking.
Here is the link to the video .... .... ....