Elantra MD (2010-15) :: Brake Pedal Is Spongy
I have a question about the bleeding the brake? When I washed my E, I usually spray the wheel and the brake part. I don't know it is a good idea or not. Recently, I felt like I have to step further on the brake pedal to apply the brake.
The force is there and Brake assist is still in effect if I step fast enough. I just felt like the brake pedal is spongy. My E is on 36k right now. Do you think wash the wheel often will cause the problem to brake line?
I have confirmed that my Gf's Elantra is easy and ease to brake than mine. At the mean time, her brake fluid is darker than mine. My brake fluid is full and clear. Maybe I should not wash the wheel more often. Or maybe I get OCD too much?
Elantra MD (2010-15) :: Knock Under Car When Step On Brake Pedal
About 9/10 times when I step on my brake pedal (speed has not made a difference) I can hear and feel a hard knock under my car by my resting left foot. Started a few weeks ago. Haven't had work done to my brakes since May 2015 so I am thinking it is unrelated. What the issue might be?
View 2 RepliesElantra MD (2010-15) :: Brake Pedal Vibration At Various Times
My friend got her front brakes and rotors replaced a few days ago and now the brake pedal is vibrating at various times. It happens when slowing down and at a complete stop. Sounds like the ABS is kicking in to me, BUT is also does it sometimes when driving at low speeds (under 40mph) without pressing the brake pedal. No loud clicking noises, just a quick steady vibration felt at the brake pedal/flooboard.
The service was not done at Hyundai dealership. She is out of town at the moment so we haven't had a chance to take it to the shop yet. She called, they played dumb apparently. I don't know enough about Hyundais to diagnose.
Elantra MD (2010-15) :: Brake Pedal Hard To Push Down Before Starting Car
I have the limited with the push start. In order to start the car, you have to push the brake in so far and then push the push button. Lately the brake pedal is really hard to push down after its been sitting for an extended period. Once its started, all is fine. Its almost like I've pumped it a few times first, but its not the case.
View 11 RepliesElantra MD (2010-15) :: Click Coming Through Shifter When Brake Pedal Is Down
I've noticed, lately on my girlfriend's 2013 with auto trans, when the brake pedal is down, and then pumped, I can hear and feel a click coming through the shifter. It happens in all gears.
View 12 RepliesElantra MD (2010-15) :: Driver Side Brake Light Does Not Come On When Pedal Pressed?
I have 2013 Elantra ( 20,000 miles) and when I put the brake lights on without the headlights on everything works ok but when the headlights are on the driver's side brake light does not come on when the brake pedal is pressed. I thought it was a bulb problem so I replaced it but I am still having the same issue. What is going on? I know it is still under warranty but I figured I could handle a burnt bulb issue but that was not it. I noticed that the drivers side bulb is not as bright either when brake is pressed without headlights
View 11 RepliesElantra MD (2010-15) :: Strange Vibration Through The Brake Pedal When At A Complete Stop
I bought a new 2012 Elantra in March. Every so often I get a strange vibration through the brake pedal when I'm at a complete stop (red light/stop sign). It happens intermittently and I can't narrow down any exact cause. It happens when the engine is cold, fully warmed up, A/C on, A/C off, only been driving for a few minutes or driving for a few hours. No system lights come on. I've taken the car to the dealer twice and discussed this with them. They've not hooked it up for any diagnostics as yet. I don't think it's a vacuum line, engine or transmission issue because it is intermittent. I also don't think it's a defective engine/transmission mount. Could it possibly be the ABS module?
View 7 RepliesElantra MD (2010-15) :: 2013 - Brake Pedal Rubbing / Friction When Depress Lightly
New 2013 Elantra owner here.. When initially depressing the brake pedal lightly (before the brake pads engage, usually in stop-and-go traffic), I can feel a rubbing sensation coming from somewhere in the pedal assembly. If it's quiet, I can also hear a groaning sound. This definitely isn't a pad/rotor issue, rather something closer to the pedal itself and inside or near the cabin.
Took it to the dealership and after some coaxing and insistence that it wasn't "normal," they finally said it was the brake switch and replaced it. Seemed to alleviate the problem for a week or so, but now it's back!
Elantra MD (2010-15) :: Brake Pedal Gets Super Firm When Hit Rough Road At Speeds
It could be the ECS kicking in or something but here's what I feel..... when hitting a rough patch of road at I'd say 25 miles an hour or greater and applying the brake over that rough patch of road for what ever reason, my foot is on brake pedal normal and it feels like the pedal gets ultra firm (opposite of pedal diving to floor if you lost brakes) or the feeling is like the brake pedal is pushing back against me, like the car is taking the brakes off on me for a brief second.....its a weird feeling and only happens on rough road when I'm at speed and have to hit brakes, all other braking times it doesn't do this
Good example is coming to a stop at a certain stop light that's got choppy asphalt right at the stop light line.....light turns yellow and I'm at speed and have to brake to stop for the light, it hit the rumbly road and feels like the pedal doesn't want me to brake and gets really firm, I stop and all, but then again makes me worry, because if I had to really stop fast and hard......would I ???
No alarm or alert lights come on, so I don't know ....
Car's got 8,000 miles on the clock ....
Elantra MD (2010-15) :: Click Noise When Apply Brake To Stop From Either A Very Low Or High Speed
I think something is wrong with my brake. I only have less than 3k miles on my 2012 Elantra GLS. But now, when I apply brake to stop from either a very low speed or high speed, I always hear a clear click (only one) sound which probably comes from under the car or brake pad (front driver's side). It sounds like metals collision. When idling, applying brake does not make any sound.
View 12 RepliesSonata NF (2006-10) :: Brake Pedal Too High
I drive almost all the time in stop and go traffic and my knee hurts because the brake pedal is too high. My wife also noticed that the brake pedal is unusually high. Is there any adjustment I can make to lower the brake pedal?
View 2 RepliesPassat (B6) :: Vibration In Brake Pedal At High Speed
At high speeds 70mph + there is a vibration with my 2006 Passat. You can definitely feel it at your feet, and slighty at the body. It is snowy and cold up here, I tried a few different roads, no change.
View 13 RepliesElantra XD (2001-06) :: Soft Brake Pedal - No ABS
Got Elantra GT 6 month ago. Good car, but it seems I have a very common problem of Elantras - lost of brakes. My car has TCS, but no ABS. It started 4 month ago. Car is fine for several weeks, but then within two days brake pedal getting from bad to worse. My mechanic already replaced master cylinder and right rear caliper. Did not work. Yesterday it was third time when I almost (very soft pedal) lost brakes. Today in Hyundai dealer service they bled the brakes and said "that they hope it will work". Their mechanic found air in both (left and right) rear brake lines. So, my question if I have a leak in, say, left line will it propagate to the right line? I am asking because I do not know the hydraulic schema of the brakes and want to collect as much info as possible.
View 17 RepliesElantra XD (2001-06) :: No Brake Pedal - It Goes To Floor
I have been working on my 01 Elantra for 2 days now. My problem is that I have absolutely no brake pedal at all, it just goes right to the floor. and this is only when the car is running, when it is off I give it a quick pump and i have a nice firm pedal. I installed a new master cylinder, bench bled it and all that jazz. I replaced the rear brakes and a wheel cylinder, I have also bled the brakes multiple times, and mutliple ways. bled the master while on the car and all the brakes while the car is off and while it is running. I dont know what else could be wrong with this. I looked at all the lines and there are no wet spots, no hoses are swelling up. everything looks top notch...i just have no brakes why.
View 15 RepliesElantra XD (2001-06) :: Brake Pedal Stiff After Starting Up
Very recently the brake pedal in my car has been stiff (won't depress all of the way down) after starting up the car when it's been sitting for a while. It takes a few presses of pedal for it to feel normal again.
I did some research and turned up a vacuum leak as a possible cause. I also wondered if a flush/bleed would be a possible fix for something like this.
Elantra XD (2001-06) :: 2004 - Brake Pedal Won't Depress
I've been having a randomly recurring problem with my 2004 Hyundai Elantra for several months now. I'll be driving along and will notice that my brake pedal won't depress. When I step off of the accelerator, it is like the brakes are already engaged. Eventually, the brake pedal won't depress at all and the car acts like the brakes are fully engaged. Sometimes I can let it sit for an hour or several hours and the brakes will readjust and I can move again. So far I have replaced both calipers, rotors, 2 brake hoses and the master cylinder, but I am still having this problem. My mechanic is flummoxed. Any time I have the car towed in, the brakes release by the time it arrives and he has no problem to observe.
View 3 RepliesElantra HD (2006-10) :: Pedal Jumps Up And Down When Brake Applied
I just put new disc and pads on my girlfriend 2007 elentra and all four little screws broke off the hold the disc so you can work on it but they aren't important apparently.
Heres the problem now the pedal jumps like i have super warped discs on the car doesn't shake or vibrate while driving but then i brake the pedal jumps up and down.
I figured it might have a stuck caliper pin, which I did so I cleaned and lubed them and I have the same problem?
Celica :: 1992 - Brake Pedal Chatter At High Stopping Speeds
92 Celica at speeds of 35 or less brakes feel fine. At higher speeds the pedal sorta chatters with light pressure. If I press harder the pedal is smooth. Is this warped rotors or possibly something loose in the assembly? The car does not pull to either side the brake pedal just vibrates under light pressure at higher stopping speeds.
If it is a warped rotor will I be able to check for it with a mic or caliper? I do not have a dial indicator to check run in or run out. I do use a good machine shop with an machinist that I trust, but I would rather not pull rotors unless I have to.
Now I know this is not just tired mechanic syndrome and is a real problem with the car.
Hyundai - Elantra :: 2002 - Brake Pedal Goes To The Floor Without Much Force
Working on a 2002 Hyundai Elantra GT. 4 disc, no ABS. Problem is the brake pedal goes to the floor without much force. I bled all 4 lines, but no improvement. Rigid lines from the brake master cylinder to the rear wheels were very corroded, so I ran new lines. The old ones pretty much fell apart when I took them off the car. I also replaced the brake master cylinder. I tried to bleed the brakes again, but couldn't get much (if any) fluid pressure at any of the wheels. Yes, I found a couple leaks at the junction points for the rigid lines, but I re-flanged those connections and got rid of all the leaks. Still no real pressure when trying to bleed.
So, I tried a second, then a third master cylinder with a new attached resevoir. No improvement. I bench bled the snot out of this third master cylinder because the symptoms clearly suggest air was likely trapped somewhere in the system. I used a wood dowel to fully actuate the cylinder many times after all the air had been released while I had short clear hoses running from the master cylinder outlets into a little plastic cup filled with clean brake fluid. I wanted to make sure there was no way air could be in the MC, and no air drawn back in when I released the wood dowel.
Next, I quickly capped off the MC outlets and connected a hose to each brake line individually where they normally screw into the MC. I then let clear fluid drain through each line until it was spilling out clear of each caliper bleeder with no air bubbles. So, no lines are kinked, clogged, or contain air.
I took every precaution to keep air out of the system, yet when I push the brake pedal, there is still virtually no real pressure generated by the MC. The power booster rod is shoving the master cylinder in as it should. I don't think there's any problem with the power booster.
I've used gravity bleeding, manual "push & hold the brake pedal" bleeding, vacuum bleeding, and I'm certain there is no air in the lines or calipers. Still no significant pressure coming from the MC when I push & hold the brake pedal to the floor. It takes maybe 20-25 pounds of foot pressure, but always goes completely to the floor with all the bleeders closed. If the pedal is held to the floor, fluid slowly seeps from the bleeders. I'm used to it spraying when doing this on a healthy brake system.