Elantra MD (2010-15) :: 2012 Gear Shift - Car Would Startup But Stuck In Park
I don't know what is causing this but I bought a 2012 elantra last week (500 miles on it so far). Yesterday when I went to start my car the clicker wasn't opening or locking the doors so I had to use my key to open the door. When I got in my car would start but was "stuck" in park and I couldn't shift past park (yes I had my foot on the brake). After about 10 minutes it just randomly worked... Today I was driving to work stopped to get gas and as I was stopping I realized I couldn't shift passed neutral to put in park (I could go back and forth between drive and neutral). While this was going on my windows would not go up or down. Again after 10 minutes the problem seemed to fix itself. What could be causing this?
View 12 RepliesElantra MD (2010-15) :: Shift Lever Unable To Move From P And D Position
I have 2013 elentra just about a year old, (Took delivery june/2012). Recently some thing happen on the Shift lever, can't shift to "R" for back in parking, Shift to "N" is OK.
Some time it can't shift out from PARK to "R" or "N" or "D" ... Under any of this situation,car engine would not start.
Sound like the SHIFT LOCK did not release properly, or the Brake paddle position switch input did not send to Computer for engine Start.
Elantra MD (2010-15) :: Transmission Would Not Shift Gear Up Or Down
I have a 2013 Hyundai Elantra with an automatic with the Tiptronic transmission. last week I went to put the transmission into Tiptronic mode and it would not go in. it like crunch to the right and would not shift gear up or down nor would the gear number appear on the digital dash.
View 1 RepliesPrius V :: 2012 - Shift Lever Lighting
I just took delivery of a 2012 Prius V - III yesterday and went out to drive it at night for the first time tonite. After setting the overhead switch to auto to make the interior lights come on when opening the door or unlocking the car, I noticed that I couldn't find the shift lever after the interior lights when out. I know where it is, but it was not illuminated and I had to feel around for it. Is the lever supposed to be illuminated and if so is the light internal to the shifter or is the shifter supposed to be illuminated from the overhead console or the dash?
View 6 RepliesElantra MD (2010-15) :: Clunk Whenever Shift Into Gear At Low Speeds
My car has the clunk whenever I shift into gear (I have a manual) at low speeds and in low gears. Brought the car into the dealership and they think it's the front axles. Had one replaced (as they thought it was the passenger side axle) and clunk is still there. Went in to have the second one replaced, but part was not right. Waiting on the new part to arrive this week.
Axle? I honestly think it's tranny or gear related. Other than that, the car has been ok. I am going to work on sound deadening this week, getting my front strut bar installed and doing some research about the rear suspension.
Elantra MD (2010-15) :: 2012 - Maximum RPM Shift Points?
I had the opportunity to test my mother's 2012 non-GT Elantra automatic. In auto mode when I floored it, it shifted from 1st to 2nd at around 6,000RPM so it shifted too soon. I didn't try it in manual mode.
I have a feeling in manual mode, if I have it set to '1' and I continue to floor it , it won't reduce power at some point (say 6100RPM), but rather will automatically shift up for me?
What are the RPM points that it'll shift from 1st to 2nd and 2nd to 3rd when flooring it both in manual and auto mode? I hope there is a way for it to not shift until it reaches it's peak HP at 6,500RPM, if not the 6,750RPM redline at each gear change.
Elantra MD (2010-15) :: Gear Shift Stuck / Burning Smell
I have 2011 Elantra at ~20,000 mile, and strange things started happening since last year...and it kinda blew up today.
My dashboard has been flickering randomly for a while, as in everything goes dark and turns up again in the middle of driving.
And today it turned off and turned on (as it usually does), and the dashboard seemed broken; speedometer stuck at 0 mph, rpm meter stuck at 0, all warning lights turned on, gas meter going up and down and stuff.
Fortunately enough I was close to home so I drove it back home, and my gear shift was stuck at neutral (I could switch b/w N and D).
So I took out the shift lock release? thing and managed to put the gear to P and pull my key out. I stepped out of my car and I smelled something burning...not a very good sign. What should I do? Well I think I need to take it to dealership tomorrow but I'm not sure if it'll be safe to drive...
Elantra MD (2010-15) :: 2013 GL - Notchy Shift Clunk From 1st To 2nd Gear
I got a new '13 Elantra GL sedan with standard transmission a month ago, and I've noticed that 1st gear is very "torquey" (always jumps when mildly applying or releasing gas pedal), and there is a very notchy shift clunk from 1st to 2nd, so loud you can audibly hear the gearshift change quite significantly. The torquiness occurs for about 1st-4th gears (It's a 6-speed), but the notchy clunk doesn't occur for any other gears except 1st, and I took my friend's 2013 Veloster stickshift for a drive the other day, and his 1st gear is MUCH smoother and less jumpy.
Also, taking off in 1st is a very delicate balance and I still stall it now and then, no matter how much I focus and practice. It also feels like it's sputtering on takeoff every time, unless I really slip the clutch (which isn't a good habit to take up). Slipping the clutch for reverse is necessary unless I want a very jumpy, very grindy and clankery (is that a word? lol) reverse.
Is this an issue with Elantra sedans in general for stickshift models, or is it a problem with my specific car? Should I bring it into the dealer?
Elantra MD (2010-15) :: RPMs Drop / Car Bogging Down When Shift Into 4th Gear
I am not sure if it's my imagination or not, but my car seems to be running differently lately.
When the car shifts into 4th the Rpms seem to drop kind of and the car seems like it is bogging down. Not extreme, but I don't remember this when I first got it. It's like I really have to accelerate when it shifts into 4th or I cannot pick any speed up.
Is it because the motor is now broken in? It has right at 8,000 miles now. It's due for an oil change, but I wouldn't think that would have anything to do with it !
Ford F-150 - 1997-2003 :: 2001 - Replacing Gear Shift Lever?
I just bought a f150 2001 5.4L crew cab. It has the O/D switch in the gear shift lever and the black plastic handle is broke. I found a complete replacement lever on ebay but cannot find any tutorials on how to replace this.
View 8 RepliesFord F-150 - 1997-2003 :: Fuse Blown When Shift The Gear Lever To Below D
1997 F150 xlt 4x4 ... When I shift the gear shift lever to below D (2-1) it blows a fuse and I lose instruments. Replacing the fuse is not difficult, just tiresome..
View 6 RepliesVolvo :: Gear Shift Got Stuck In Neutral - Control Rod Loose From Transmission Lever
Volvo Automatic 1992 240 - So, just started to back out of the garage and, all of a sudden, my gear shift got stuck in neutral and then started shifting without engaging the transmission at all. Pushed it back into the space and, taking a look underneath, I realize the control rod's completely detached from the lever in the transmission.
I can re-attach it, but it just comes loose again when I shift. It seems like something should be in there to hold the control rod in place with the transmission lever, but I don't know what because I can't seem to find any documentation on what everything should look like down there.
Attaching a couple shots, one with a circle around the area that's coming un-attached since the angle's a bit off.
Attached File(s)
IMG_8972.jpg ( 1.09MB )
IMG_8978.jpg ( 938.64K )
Sonata I45 (YF - 2011+) :: Braking Noise When Coming To A Stop Near Gear Shift Lever
I have a 2011 Sonata with 4,000 miles. Recently, I have noticed that when coming to a stop, I hear a light thump noise in the center console area near the gear shift lever. If I put my hand on the gear shifter, I can feel it move ever so slightly at the time of the noise. The noise is very repeatable. If I take my foot off the brake and start rolling and then I reapply the brake (either softly or hard) it will make the thump noise. It is not very loud and can be drowned out with loud music, but if listening to news, it is very noticeable and annoying in city traffic, where stops are very frequent. I put the car up on ramps and looked underneath and did not see anything noticeable. It will probably require the center console between the seats to be removed.
View 14 RepliesFord Aerostar :: 1991 - Shift Cable Popped Off Gear Select Lever
I have a 1991 Aerostar 2wd 3.0. I recently had freeze plugs replaced and the mechanic had to drop the tranny to get to some. Now the shift cable has come off the gear selector lever. I have googled everywhere and can't locate the procedure for reattaching it. My mechanic was doing the work on the side and charged me only labor for his assistant. He is at work right now..
View 5 RepliesElantra MD (2010-15) :: 2011 - Rough When Dropped Into Gear / Up Shift And Downshifts Equally Hard
Drove to work today and all was fine. Came out at 3 and started my Elantra up, dropped it into gear and it was ROUGH. Engine ran for a few seconds before I put it in gear. The shifts up the street were hard and the downshifts were equally hard. I put the transmission in manual--same thing. After a few minutes, the shifts returned to normal. No CEL. The car has 48,700 miles on it.
View 10 RepliesLincoln - Towncar :: 2001 - Intermittent Vibration When Move The Gear Shift Lever To D For Drive
I have a 2001 Lincoln Town Car that has an intermittent vibration that can be felt when seating in the car and you move the gear shift lever to D for drive. The car has 141,000 miles. It is an automatic transmission. The vibration cannot be felt when touching the steering wheel. What could be causing the vibration?
View 3 RepliesHyundai - Sonata :: 2006 - Gear Shift Lever Wet / RPMs Went Up High And Car Barely Moving
I had to stop quick today. My ice water spilled into the gear shift lever. A mile down the road my rpms went up high and the car barely moving.
2006 Hyundai Sonata...
Elantra MD (2010-15) :: 2012 - Tap Clunk Type Noise When Shift The Auto Trans Into Drive And Reverse
For a few months now I have been hearing a tap clunk type noise coming from under the car when I shift the auto trans into drive and reverse. Also sometimes when the car is slowing when driving I hear the tap sound as it shifts into first. I drove in by my local dealer and they listened to it and said Elantra transmissions can get noisy there is nothing wrong. They told me I have plenty of Warranty left so if something happens I will be covered.
View 2 RepliesChrysler - Cruiser :: 2007 - Won't Start Easily After Maintenance - Gear Shift Button At The Top Of Lever Sticks?
I have a 2007 Touring Edition PT Chrysler Cruiser which was just a few days ago repaired because of damage under the front of the car. Front bumper, ouside and inside grills, all housings and connecdtions in the front area were replaced, including air conditioning mechanisms. Received car on Monday, Friday evening, it wouldn't start. Just made a tet tet tet or clicky kind of noise, no turning over of engine, then there was no noise ... just wouldn't start. Got jump, still wouldn't start until the third cycle that peddle was pressed. Now I'm finding that the longer I let the car idle, the more likely it will be to start after more than two hours of non-use. Had all electrical circuitry checked ... battery's 100 percent, alternator is working fine, but it's still not starting.
Car's gear shift button at top of lever is also sticking when I put it in park to turn the car off. Have to pull the top button up to get the key out. This was happening before car was repaired underneath front. Talked to warranty person, and he felt that maybe the ignition starter switch (if that's what's wrong) and sticking gear shift may have something to do with each other. Since car is actually starting after being run, maybe it's not the starter switch. I'd hate to get it repaired if that's not what it is. Thinking about having a Chrysler dealership do a diagnostic test on it to pinpoint exactly what is going on.
What's happening? Why is my car cutting not starting in selective situations after not having been idled for a couple hours or more?