Chrysler - Transmissions - Ptcruiser :: Code P0700 / Hard To Shift Past Second Gear

My 2005 PT Cruiser (not turbo) is giving me a very frustrating P0700 code and a weird problem. First thing in the cold, autumn, the car drives perfectly fine (through still with the engine code on). Once the day warms up a little, the transmission decides that shifting past second gear is for punks and won't do it, so 30 mph has the engine revving at 3K rpm.

My morning commute is 20 minutes, and in that time, I go up to 50 mph with no issues. Driving home, or any other time of day, becomes the issue. What in the world could possibly be going wrong? I've been trying to hit up the junkyard for a PCM to see if switching that out would work, but it's been too rainy and cold to get out there.

View 1 Replies

Chrysler - Ptcruiser :: 2006 - Idles Rough And Shakes Between 50 And 60 Mph

I have a 2006 PT Cruiser with approximately 94K miles on it. This year I started a 2-hr round trip commute every week day, so the car went from getting ~200 mi. a week on it to ~700 mi. a week. I bought it used ~4 years ago with 28K mi. on it.

2 months ago, the car started shaking between the speeds of 50 and 60 mph. Not sure how to best describe it - kind of a shake/jerk, like someone was jerking the car forward very quickly and repeatedly. It seemed to be strongest in the front of the car on the passenger side, although you could feel it throughout the car. I took it to a repair shop. They balanced the tires, but that only very mildly worked. Then they changed the front axles (said there was a lot of play in them). They replaced the brakes, rotors, and timing belt at as well, for unrelated reasons. With new front axles, the shake disappeared, but the car has been idling incredibly rough ever since I got it back. You can see the steering wheel vibrate and feel it in the seat when I start the car or am stopped with it running. This never used to happen.

Additionally, the shake has now returned, but from the driver's side of the front of the car now. Again, it's between 50 and 60 mph, although it's slowly creeping up into the 60-65 range also. It's stronger if I'm pushing the gas down more, like when going up a steep hill. If I'm going downhill at 50-60mph, I don't notice it or barely notice it. On flat ground it's noticeable, uphill it's becoming severe.

View 3 Replies

Chrysler - Ptcruiser :: 2006 - 5th Heater Core In A Year - Cause?

We have a 2006 PT Cruiser. Within a year the Dodge dealer has replaced the heater core five times. They say it's a defective part each time, but I'm not so sure. Usually the core gets a leak after the car has been driven, then parked for a few minutes. When we restart it the heater core blows sending antifreeze vapor out the heater vents.

View 2 Replies

Chrysler - Ptcruiser :: 2006 - CEL Comes On Intermittently / Controls Read Incorrect?

My check engine light goes on ONLY when my husband starts the car.He is starting it normally.Then all the controls read incorrect such as temperature and RPMs.When I get back in my car later , I start it and it goes off! Why this is happening or what he might be doing?

View 8 Replies

Chrysler - Ptcruiser :: 2006 - Squeaks From Front At Slow Speed?

My 2006 PT Cruiser Touring Edition has a lot of squeaks from the front. Most noticeable at low speed going over speed bumps or potholes. My mechanic has checked front end and says noise is coming from rear cradle bushings and wants to drop rear cradle and inspect/lube bushings. Also says sway links are dry and recommends lubing these as well. Everything else is OK. Estimate is $100-$150. Other than the annoying squeaking (which I can live with) is there any other reason (safety/mechanical) to get this done?

View 2 Replies

Chrysler - Ptcruiser :: 2006 - Shakes When Stopped At Idle In Gear And AC Compressor Is On

I have 2006 PT Cruiser Turbo Convertible that violently shakes when I am stopped at idle in gear and the A?C compressor is on. When I turn the A/C compressor off (leaving the fan on) there is a drastic reduction in the vibration. If I put it in park and turn the fan off, there is an additional lessening of the vibration.

I have taken it to three different mechanics and had the following done: spark plugs and spark plug wires changed, fuel injection system cleaned, the 'whatchamacallit' in the fuel system cleaned out, the two main motor mounts changed.

None of the above maintenance has lessened the vibration one bit. Question: What is causing it?

View 6 Replies

Chrysler - Ptcruiser :: 2006 - Dashboard Lights Up For No Reason / Losing Power

My dash board lights up for no reason. All the lights -- seat belt, engine, oil, etc. Also the speedometer goes from 0 to 100, the RMP needle goes from 0 to whatever and my gas tank need goes from empty to full to back to empty. In addition it is now loosing power --no gas is getting where ever so I must pump gas peddle to get it going again. It usually lasts only seconds and there is NO rhyme or reason to when it does it. I left it with a dealership and they drove it 265 miles and it did nothing. I got it back and within 48 hours it started doing it again. They did put in a new instrument cluster and it still continues.

View 3 Replies

Chrysler - Ptcruiser :: 2006 - All Warning Lights On Dashboard Lit Up And Gauges Go Dead?

I have 2006 Pt. Cruiser Touring with 150,000 miles on it. It has been well cared for with oil changes, tire rotations, tune ups, and preventative maintenance done regularly.

My problem is this. Sometimes when I drive the vehicle, all the warning lights on the dash board will light up, and all the gauges go dead. But the car keeps running and does not decelerate or lose power. The lights shut off within 3-6 seconds, with the seat belt lights being the last to go out. I have paid over $600 dollars for 6 hook ups to the computer at the dealer with no codes showing.

I have just replaced the belts, cam & crank sensors, spark plugs, spark plug wires, battery, alternator, hoses, water pump, timing belt, and it still does this. This morning when driving to an appointment, it did this again 3 times within 5 minutes. I had activated the cruise control when it did this. When I turned the cruise control off, it did not do it again. But in the past, this has happened when I was not using the cruise control. And it happens at all speeds, 60, 20, 35, or 40 MPH. What is wrong with my car.

View 19 Replies

Chrysler - Ptcruiser :: 2006 - Gauges Drop - Stop Working - Power Loss

2006 Chrysler PT Cruiser. While driving, it seems at random, all gauges drop and stop working, no gas getting to the car, power loss. Sometimes lasts a split second, sometimes lasts up to 30 seconds. The car will even stall here and there, but usually not. Usually, power gets restored. But sometimes the car won't even start for an extended period of time. Of course, when the mechanic takes it for a ride it does nothing wrong.

View 2 Replies

Chrysler - Ptcruiser :: Shimmy At 70 MPH

My son's wife has a PT Cruiser, she told me last night that it has a shimmy at 70 mph. What are the causes of this ?

View 10 Replies

Chrysler - Ptcruiser :: Wobbling While Going At 55-60 Mi/h

My PT has a vibration, I've replaced rear drums, rear hub assemblies, front brakes and front rotors and all four tires.The vibration is only while going 55 to 60 MPH each time I've replaced the different parts (rotated the tires and rear drums) the wobble seems to go away for about a few miles and then comes back!I'm going to replace the front hubs and bearings now, but why would the wobble change each time I changed I've changed all these parts around. Could it be a bent rim? or just the front bearings?

View 5 Replies

Chrysler - Ptcruiser :: CEL Cause The Car To Buck Or Stall

I have a 2004 PT Cruiser with 111,000 miles on it. A summer or two ago, whenever it got hot out, the check engine light would start to come on. Usually, it didn't affect the car's driveability - but sometimes, it would cause the car to buck and/or stall, sometimes to the point of stalling completely out. Brought it into the shop again and again. Camshaft sensor. O2 sensor. Crankshaft sensor. Replaced. Checked. P0304 misfire code came up in diagnostics again and again. Re-wiring of camshaft sensor wires. And on and on. And yet again, intermittently, the check engine light would come back on and the whole thing would start all over again. Sometimes you'd drive it, stop somewhere, start it again, and the check engine light would be gone. Sometimes it would stay on for days. Weeks. Sometimes with no other driving symptoms - it just depends on how the car is feeling? I thought the problem was limited to the hot months of summer, but now it's the dead of January in Minnesota and it's happening again. Yesterday, it stalled out completely and I had to get it towed to the shop - decided to try a new shop, they said maybe the problem was that the old shop did a bad wiring job. OK. But then, got the car back, no check engine light on first drive, stopped somewhere for 5 minutes, get back in, start it again, check engine light back on. But at least the car started and didn't buck/stall. Now it's back in the shop, but I'm ready to give up.

View 5 Replies

Chrysler - Ptcruiser :: 2001 - ABS Code 18?

What is ABS code 18 2001 PT Cruiser???

View 14 Replies

Chrysler - Ptcruiser :: 2002 - Car Won't Start At All Just Clicking

I have a 2002 chrysler pt cruiser. For the past week when I start to crank it it will just click one or two times then crank. Today it won't start at all just clicking.

View 2 Replies

Chrysler - Ptcruiser :: 2005 - Rough Idle When Let Off The Gas

I have an 05 pt cruiser that idles rough sporadically. Sometimes it idles smooth, sometimes it is rough but will calm down when i shift into gear, and sometimes it is rough when i let off the gas and come to a stop sign. When i first crank the car, the idle is rough and will act like it wants to cut out when i first back out of the driveway, but it clears up and drives better after getting gas. I have changed the plugs and wires, which did work, but there is something else still causing some problems. When at cruising speed, you can't detect any stutters or other problems. I looked at the vacuum lines and have a bottle of injector cleaner on 3 tanks of gas back to back with no apparent change. I did put a PCM on it a few years back, is it possible it has gone bad? The gas mileage also has seem to be suffering. I also checked the air filter as a possible problem, but it is very clean.

View 6 Replies

Chrysler - Ptcruiser :: 2007 - Tries To Stall When Stopped

I have a 2007 PT Cruiser that's just about to hit the 100,000-mile mark. My problem is when stopped, the car feels like it wants to stall, but only when the AC/Heater/Defrost is on. Also, when it starts to act up, the heater stops working, leaving only the fan to blow air around. It doesn't happen all the time, but enough to make me turn off the heater or whatever I'm using when I come to a red light. It just started doing this and I just wanted to have a rough idea as to what it was before I took it to a mechanic.

View 6 Replies

Chrysler - Ptcruiser :: Overheating And Temperature Light Comes On

After running for a while traveling to and from the store, my temperature gauge on my 2005 PT cruiser rises to hot and the temperature light comes on. However,when I get out and raise the hood. The engine doesn't seem to be overly hot. No boiling or hissing sound and no steam coming from the engine.

View 3 Replies

Chrysler - Ptcruiser :: 2005 - No Electrical Power

I drove the car to town this morning, and then to work without problems. I go to get in the car and the car has no electrical power what so ever. I am going to check the voltage and battery terminals, but is there a fuse that sends power to everything in the car, including lights, horn, etc? There is NO power at all.

View 5 Replies

Chrysler - Ptcruiser :: 2009 - A/C Does Not Work At Idle

A/C works fine when moving. At idle, it doesn't work. Fan is not spinning. Is it definitely a bad fan or is it a possible fuse/switch/module? How difficult it would be for a novice to replace the fan?

View 2 Replies