Accent MC (2006-11) :: 2009 Intermittently Misfiring And Burning A Lot Of Oil On Start Up
So I've been trying to get rid of the check engine light recently so I can get the car inspected. The car has about 130,000 miles. I was having problems with the car intermittently misfiring, and burning a lot of oil on start up. Also the car still had the original timing belt up until this time so I decided to change the valve seals and timing belt. I couldn't get the timing right so I took it to a mechanic and he got the car running like it was before I took it apart, although I don't think he changed the timing between the camshafts. The check engine light stayed on with p0016 as the code. The car accelerated poorly, but otherwise drove fine. I tried changing the camshaft sensor, and cleaning the OCV but that didn't work. So today I looked at the timing between the two camshafts and moved the intake cam over by one tooth which got rid of the p0016 code! Unfortunately the car decided to replace that with the p0340 code. I didn't notice any damage to the pins on the sensor. It seems to stumble for a bit after start, and when releasing the gas after revving the engine, but otherwise idles okay. I have yet to road test it.
View 4 RepliesAccent MC (2006-11) :: 1.6L Engine Started Misfiring
I have a 2011 Hyundai Accent 1.6L. A few weeks after I bought it w 38,000 miles, it started misfiring so I replaced the spark plugs. It ran great for about another 6 months and started misfiring again. I took it to Hyundai to have it fixed and of course it wouldn't do it for them. I told them what it was doing and they said that there was no code so it was probably my spark plugs. I replaced my plugs with the OE plugs and got the same trouble about 4 months later. Now it has 60,000 miles and my warranty is done. I put in new plugs yesterday and it only ran well until it warmed up and it did the same thing. I ordered new, better than OE Delphi coils yesterday and I'll get them today. I feel like there's a bigger problem with the system that's causing the problem with the coils.
View 7 RepliesAccent MC (2006-11) :: Misfiring On Idle - No Code
Recently got broadsided (passenger), got the body fixed up. Now it is Misfiring on idle and only on idle...
Prior to this I had Coil go out on me, got that changed out, changed the spark plugs. It was running great then the accident happened an this Misfire on idle problem.
Took it to the shop, had them check for a code, no code. They suggested that it made be do to carbon buildup from the previous misfiring issue and suggested using STP engine treatment on it.
Accent MC (2006-11) :: Misfiring Followed By CEL Coming On And A Cylinder Cutting Out
I'm having the absolute worst time trying to fix my wife's 09 accent. We bought the car in '12 with 45k miles on it, and just hit 109k last month. About a year ago, the car started misfiring badly (hot day, after reaching operating temperature) followed by the CEL coming on, and a cylinder cutting out. I (mistakenly) figured coils, and replaced them. This "fix" didn't last more than a couple months.
I've also replaced the intake manifold gasket, suspecting a vacuum issue, due to the symptoms. While doing that, I put in a new PCV valve. To no avail, as the car still misses, chugs and shudders while accelerating at operating temperature. I've disconnected/checked the sensors on the manifold, the 02 sensors, the evap purge solenoid...I absolutely can not wrap my head around this.
The weird part is that the car starts fine when cold, (with only a split-second hesitation if you goose the throttle) and will run great for about 10 minutes/until it warms up. Then,once it warms up it will jerk, shudder and not accelerate at all unless you knife the gas. After letting off the gas, it goes right back to "misfiring" and the light comes back on. I can shut the car off, restart it, and it will run fine until the accelerator is pressed.
Accent MC (2006-11) :: Low Acceleration And Engine Shaking / Two Cylinders Misfiring
So as I was heading out the other day, the car had low acceleration and engine shaking. The check engine light started flashing.
Checked the codes at the parts store: P0300, P0301, P0303.
I just dropped it off at the auto repair shop.
Could it be a I'm just wondering if I shouldn't have taken it to the dealer as the printout says it could be a CPU issue?
Accent MC (2006-11) :: 2007 - Misfiring Codes P0300 And P0302
My girlfriends 2007 accent as thrown codes p0300 and p0302.
After reading everything I could find, I had coil pack on my list of possible problem items.
The car sat in the driveway yesterday and when she went to start it today, she couldn't get it to.
I got it to start when I got home by giving it some gas while turning the key, but I don't want to drive it anywhere.
The hard start is leading me to believe it's the coil pack.
I was going to start with changing the pcv, spark plugs, and run fuel injector cleaner through it because those are the cheap possibilities...but now may add in a new coil pack.
Accent MC (2006-11) :: Cylinder 2 And 4 Misfiring Causing Car To Shake While Idling Or Speeding Up
Recently my car, after I put fuel into my car, my car won't start unless I apply the gas and then shift it into gear. I thought that perhaps replacing my spark plugs would fix this problem since it is about time for a tune up on my 2010 Hyundai Accent. About a week after changing the spark plugs I now have an error code that states that Cylinder 2 and 4 are misfiring and it is causing my car to shake while it is idling or speeding up. Also it is much slower than before to get it started from a stopped position.
View 11 RepliesAccent MC (2006-11) :: Suddenly Started Running Real Jerky, Rough / Misfiring
Our Accent has just about 86k on it now, back in November it suddenly started running real jerky/rough, misfiring kinda thing. So I was able to drive it to my local repair shop and they found a bad coil pack on #3, so they replaced that and put in new plugs while they were doing it.
Just Saturday we were shopping about 20 miles from home and cranked it up to go home and started doing it again, pretty much identical symptoms, runs out normal at certain RPMs so I knew it was probably same thing...I was able to get it home and then took it in this morning and sure enough now #1 is shot. So they are replacing that. They want about 30$ more per coil then I can order them for myself online so I didn't want to scarf up the money for the other 2 that are still original.
Accent LC (2000-05) :: Check Engine Light Came On / Code P0740 - Car Started To Choke
while scraping ice off the windshield this morning with the car warming up, it started to choke, engine light came on. Used my OBD reader and found only one code, that being p0740. Cleared the code and all was fine after that, it drives the same way it always has and nothing feels different, revs are the same shifts gears the same. I know it had something to do with the torque converter clutch.
View 4 RepliesAccent LC (2000-05) :: Started Kind Of Rough Then Knocking / Tapping
I own a 2001 Accent 1.6, auto. 150,000 well-taken-care-of miles. New plugs/wires/timing belt/coolant flush 10,000 miles ago. Most recent oil change was with Shell Rotella T5 (I believe 10w-30 blend) and Purolator PureOne filter, 4-5,000 miles ago. It does not burn any oil, and runs very well. It has never been low on oil, revved high, or abused in the 10,000 miles I've owned it (except an ebrake u-turn on a dirt road to scare the wife )
The engine has always had a mild tick when cold, that goes away within about 30 seconds. Normal, from what I could tell. Also, it has always had a tick from roughly 1500-idle when releasing the gas, in neutral. Again, seems fairly normal for a little engine, I figured just some valve noise.
This morning I started the car (sat overnight) and it idled a bit rough for about 20 seconds, and I noticed that the ticking from before was now closer to a knocking/tapping, nowhere NEAR the horribleness of a spun rod on my WRX . But it was still a bit alarming. It never really quieted down, but as I rev, the sound goes away completely above 2k, and the flutter when I release the throttle is louder than before.
Accent MC (2006-11) :: 2010 Stalling Intermittently Always When Idling
My 2010 Accent has been stalling intermittently, always when I am idling. I'll be at a stop light, and it will stall, and then it usually starts right up again. It is almost always the same stop light on my way to work, like clockwork, and likewise on my way home from work. Also, sometimes right after this stalling event, the motor will be a little rough on the highway, sputtering like it's not getting gas very well, but then it evens out after a while.
Yesterday for the first time it died and wouldn't start again. I suspected my fuel pump had gone out. I had it towed to a repair shop, but it started just fine for them and they can't re-create the problem. It doesn't give any computer codes at all.
Accent MC (2006-11) :: 2008 Will Intermittently Crank But Won't Turn Over
My 2008 Accent will intermittently crank crank and will not turn over. You can hear it trying to start but it seems like its not getting fuel. Then I will stop turning the key, try again and it will start. It may do this two or three times before starting. I have no codes.
View 6 RepliesAccent LC (2000-05) :: Thumping Kind Of Sound That Is Constant With Vehicle Speed
For about the last month or so my car has been making a strange thumping kind of sound that is constant with vehicle speed. slow or fast. changed the rotors, pads, hardware, shoes and machined drums. also has a slight pulsation when coming to a stop. Thought it was the tires but they look good. can not find anything wrong.
View 10 RepliesFord - Escape :: 2006 - Ran Out Of Gas And Won't Start - Shudders On Low RPMs And Does Not Choke Out At High Revs
So my story starts simple enough; I ran out of gas in my buddy's car, filled it back up, it finally started but ran like >poop< for the first 10 min or so. Finally after coaxing for 10-15 min, she stays coming around. After 30 min or so of driving, I could drive her all I wanted, so long as I didn't let it idle below 12-1500 rpm. If I did that, she'd kill, and stall out. Well I drove her the other day for most the day and it seemed the kinks were worked out. So today when I tried to drive her round the block for a final check, she up and dies, and hasn't started since. I've replaced the fuel filter, checked the intake, and dropped a can of sea foam in to the tank to boot, but no dice.Signs and symptoms seem to mimic a bad mass air flow sensor or possibly a clogged catalytic converter, with the exception that it only shudders and acts congested on low rpm's and doesn't choke out at high revs.
View 15 RepliesTouareg :: 2006 - Runs Rough After Cold Winter Starting / Choke Stuck Closed
I have had my 06 for 4 months now. I started to get a cold running problem now that the temperature is falling below 40. When I start it in the morning I wait till the idle comes down before driving. I start driving and it runs rough as if it had a choke stuck closed. I spoke with the dealer and he told me to run lower octane in the winter. That has not worked.
View 7 RepliesPassat (B6) :: 2006 Engine Will Give Surge Of Power And Then Kind Of Slow Down
I just bought a 2006 Passat 2.0T FSI about 3 weeks ago, love the car so far. My only concern is within the last week i have started to have a little bit of a lack of power. The engine will give a surge of power and then kind of slow down for a minute then a surge of power and then slow down. Also the other day i started it up and it had a little bit of a rough idle until it warmed up, don't know if these are related. Has right around 91K miles right now.
View 6 RepliesGolf IV / Jetta IV :: 2002 VW Intermittently Starts / Jerking Feel And Sound Of Misfiring
The car is a 2002 VW Jetta, automatic 1.8t GLS. 146k miles on it. Has an external amp/sub wired up by my brother who is an MECP certified tech and has been doing car audio and overall Audi/VW for years.
I was driving, nothing out of the usual, this car is my daily. Stopped because of traffic and my car died in the middle of traffic, the gauges (tach, speedo, gas, etc) spiked immediately, which I assumed meant loss of electricity, but my radio, headlights and everything else stayed on. The oil and Battery lights came on as well. Tried to start it, it was trying to start, and was cranking quickly, but wouldn't turn over. I got it out of traffic. I pulled my amp power and the car turned over and started driving like normal, so i figured there had been a short in the wire and that was what caused my issue. Drove about a half mile down the road, car shut off again, car said it needed oil this time. checked the oil, there was plenty, but i put more in to be safe, and it turned right over and i managed to drive it about 30 minutes and got it back to my house.
So, my brother and i look the car over, couldn't find anything really wrong with it, so we took it out for a drive, no problem at all for the first few minutes of driving. Car shuts off again, doing the same thing, but just the battery light came on. My brother jumped my car, it turned over, but as i started to drive it, it was a lot more rough with shifting (possibly tied to electrical problems because i know there is a solenoid cluster for automatic transmissions), i mean you could actually hear the gears shifting and the car was kicking through each gear, as well as my driver side headlight not turning on (just installed brand new xantec 6k 55w HIDs, but i dont think those are the problem because the problem started before i installed the HIDs) and died 3 more times before i got it home, having to jump the car every single time with symptoms the same as the first time it died without the oil light. Another thing i noticed is that the car seemed to only die when i hit the brakes and the car went to low RPMs, which lead me to believe a major vacuum leak. At idle the car also seemed like it was misfiring even though the CEL was not flashing, it just had the jerking feeling and sound of misfiring.
My brother and i take a better look into the bay area, and noticed that the top of my engine was covered in oil, from the intake manifold back. I know my car has been leaking oil, but not spraying it. We pulled everything apart, totally cleaned the engine bay area out including MAF, spark plugs, coil packs etc. The engine bay area looked practically brand new. Now i do know that my car has had a vacuum leak (no boost gauge to tell how bad, but the brakes were a little bit less responsive and the car was acting as though it was misfiring despite the fact that the coil packs and spark plugs are brand new) and we couldn't find where it was, and we thought that maybe that was the problem. A lot of the vacuum line was dry rotted and falling apart and some parts weren't even connected anymore from that, which we replaced all of the line we could find to eliminate the idea of a vacuum leak causing the car to die when i hit the brakes. We also tested the battery with a multi-meter which read variably between 13.8-14 V, which if i understand correctly is within normal range, but oddly enough we put the battery through a stress test including turning on defrosted, turning sound system back on, headlights on etc, and the voltage didn't read much different, still bouncing between 13.8-14.
When tearing things apart, we also found that the starter solenoid was unbelievably loose due to a bad transmission mount, and one bolt was missing, so we were thinking that could be arcing causing the problems, but when the solenoid was tightened down, the problems still persisted.
Started the car, let it warm up, and it seemed perfectly fine. I drove it into town without problems, but forgot my wallet at home, so i had to turn around and go back. Almost made it home, the car died while stopping at a stop sign. Tried turning it back over, nothing the first 3 times, let it sit for about 5 minutes and the car turned right over as if nothing was wrong. Died again when i made it into my driveway about 0.5 miles away and the symptoms repeated until the car finally just turns on like normal now, but the idle is at 1100 RPMS (not sure if related or not) even though the car is at the optimal temperature. I tried driving it again after the car starts normally like it does now, but it just repeats the symptoms that it has been, cutting off but leaving the stereo, headlights etc on. I managed to get it back in my driveway.
Chevrolet - Malibu :: 2006 - Electric Power Steering Tight And Kind Of Jerky
My Wife has a 2006 Chevy Malibu Maxx Lt, we recently had a series of factory safety recalls performed. Now we have a message coming up saying "POWER STEERING" and the steering wheel is tight and kind of jerky. We didn't have this much trouble before we had the recalls done.
View 10 RepliesAccent LC (2000-05) :: Misfiring After Getting Gas - Kicking And Bucking
I have a 2002 Hyundai accent 1.6L w/ 190,000 miles. Around Christmas one cold morning right after getting gas at a grimey service station my car started running like crap misfiring badly. Kicking and bucking it barely got me to work (6 miles). I took the car to an Advanced auto and had them plug it in to check the engine light. It was throwing multiple codes P0300 (Multiple Misfire Detected), P0301 (Cylinder 1 Misfire Detected), P0303 (Cylinder 3 Misfire Detected). I told the guy at advanced that I thought it was bad gas and he agreed, so I put some dry gas and Lucas oil gas treatment in it. The problem seemed to get better within 50 miles, only misfiring when I drove it hard.
The problem has come back and this time the gas treatments are not working. I am getting the same two codes along with a new code P0133, (HO2S-11 (Bank 1 Sensor 1) Slow Response) and the same symptoms, and to top it off my flex pipe has rusted out (for the second time).
So now I don't think the initial problem was water in the gas, and I am not sure what to make of it. The problem seems to happen more noticeably when I push the engine (first gear, and when accelerating) but then seems to get better when maintaining a constant speed. Also, the misfiring happens all the time but more noticeably when the engine gets to running temperature. First gear is by far the worst when the engine is warm.
- The car got a tune (filter(s), plugs wires) up about 6mo ago
- The timing belt is old about 90k on it
- A new crank shaft position sensor a year ago
- New O2 sensor (the 2nd one past flex pipe) 6mo ago
- Burning about 1qt of oil (synthetic) every 3k miles but no smoke
- The car has the original clutch w/ 191k on it!
This is where I stand. I don't care about the flex pipe or the timing belt. Unless I can defiantly pinpoint the problem to one of those two, the car has so many miles on it, to start dumping that kind of money into it doesn't make sense. I have put a spark test light on each of the plugs BUT the problem does not happen when the car is idle so it showed me nothing but properly functioning plugs. I was thinking the ignition coil (its original) but I think that would throw a code.