Accent MC (2006-11) :: Suddenly Started Running Real Jerky, Rough / Misfiring
Our Accent has just about 86k on it now, back in November it suddenly started running real jerky/rough, misfiring kinda thing. So I was able to drive it to my local repair shop and they found a bad coil pack on #3, so they replaced that and put in new plugs while they were doing it.
Just Saturday we were shopping about 20 miles from home and cranked it up to go home and started doing it again, pretty much identical symptoms, runs out normal at certain RPMs so I knew it was probably same thing...I was able to get it home and then took it in this morning and sure enough now #1 is shot. So they are replacing that. They want about 30$ more per coil then I can order them for myself online so I didn't want to scarf up the money for the other 2 that are still original.
Accent MC (2006-11) :: Low Acceleration And Engine Shaking / Two Cylinders Misfiring
So as I was heading out the other day, the car had low acceleration and engine shaking. The check engine light started flashing.
Checked the codes at the parts store: P0300, P0301, P0303.
I just dropped it off at the auto repair shop.
Could it be a I'm just wondering if I shouldn't have taken it to the dealer as the printout says it could be a CPU issue?
Accent RB (2012+) :: CEL Started Flashing And Misfiring Shortly After Filling The Tank
2014 Accent 14,000 miles
Filled the tank and shortly thereafter there CEL started flashing and the car sounded like it was missing. It was towed to the dealer, and they said they cleared the light and could not get it to happen again.
When I next drove the car it ran fine for 20 minutes, then it started misfiring and the CEL started to flash. Had it towed to a different dealer, and they said the same thing. Cleared the light, but couldn't get it to happen again.
On the way home form the dealer, after about 20 minutes of driving - the same thing. Today, I started the car in the AM no light and running fine, drove around and town and in exactly 20 minutes it was misfiring again.
First dealer said it was a P0302 code.
Accent MC (2006-11) :: ABS Light Will Not Go Off After Engine Started
Encountered the said issue where the ABS light will not go off even after engine started.
After a 30 mins smooth drive, I park my car and went off for 10 minutes. Back to the car and it took longer time than usual to start the engine. (normally took only 1 second to start the engine). It feels like the battery is not properly charge.
After a short drive, my parking brake aka hand brake and ABS light appear at the same time when the car is moving. Stop my car aside, restart engine, parking brake back to normal. ABS light will not go off since then. Starting the car seems easy as usual though.
Passat (B6) :: 2006 - Car Started Jerking / Misfiring
I've been out of town a bunch and my car has been sitting out at the airport. I picked it up last friday, drove it home. Today on my way to work the car started jerking - like the engine was trying to rev slightly. When I put it in park, and listened, the engine was jerking or misfiring maybe. The exhaust was a bit louder than normal as well and i could hear the stress in it. I also smelt a strange burning smell. I've called and had roadside assistance pick it up and take it to the dealer.
View 7 RepliesAccent MC (2006-11) :: Misfiring On Idle - No Code
Recently got broadsided (passenger), got the body fixed up. Now it is Misfiring on idle and only on idle...
Prior to this I had Coil go out on me, got that changed out, changed the spark plugs. It was running great then the accident happened an this Misfire on idle problem.
Took it to the shop, had them check for a code, no code. They suggested that it made be do to carbon buildup from the previous misfiring issue and suggested using STP engine treatment on it.
Chevrolet - Malibu :: 2006 - Misfiring And CEL Started Blinking When Accelerating From Stop Up To 30 - 40 Mph
About a week ago, my wife's Malibu (~130,000 mi) started exhibiting symptoms I would associate with a problem with the ignition system. It was idling rough, it felt like it was misfiring, and the check engine light started blinking when I was accelerating from stop up to 30-40 mph.
The timing was all weird because of the holiday, and so I didn't take it to get the engine codes pulled right away because I figured Id take care of it this week (we were traveling over the weekend).
My wife just called and said her car won't start at all. The car will try to turn over and she didn't describe anything consistent with a dead battery.
If I can't get it somewhere to get the codes pulled, what might be wrong? To summarize, it started idling roughly and maybe misfiring about a week ago, it sat for four or five days, and now it won't start.
Accent MC (2006-11) :: Misfiring / Intermittently Kind Of Choke
Have a Accent GLS 1.6L, 92,000 miles on it the issue is what I stated above.
Basically back in March I started having issues with my car and it seemed like it was misfiring or something of the sorts at first I thought it was the IAC motor because it would only intermittently kind of "choke" if you will and it only did it while I was idling and in drive. So before I decided to go further with the IAC motor I decided to take it and have the throttle body cleaned, but it eventually started to do it again. After that I had my fuel injectors cleaned and that didn't work much at all. Kept going until a couple months ago when it actually set off a check engine light and it started doing it almost violently.
Check engine light came up with the result that coil 2 is misfiring and I went about replacing the spark plugs and the boot to one of the coils and that made the issue go away no check engine light, no nothing. Past couple days it's been doing it very very occasionally but yet still doing it.
I don't have a whole lot of cash but I need a solution quickly because this is starting to become a pain I don't want it to become so bad that I'm without a vehicle that is operating properly again.
Only thing I can note is that now it is very occasional, and when the car could be otherwise be considered "cold" and often I can't make it repeat the same thing. Had oil above cylinders when I had the plugs replaced.
Accent MC (2006-11) :: Misfiring Followed By CEL Coming On And A Cylinder Cutting Out
I'm having the absolute worst time trying to fix my wife's 09 accent. We bought the car in '12 with 45k miles on it, and just hit 109k last month. About a year ago, the car started misfiring badly (hot day, after reaching operating temperature) followed by the CEL coming on, and a cylinder cutting out. I (mistakenly) figured coils, and replaced them. This "fix" didn't last more than a couple months.
I've also replaced the intake manifold gasket, suspecting a vacuum issue, due to the symptoms. While doing that, I put in a new PCV valve. To no avail, as the car still misses, chugs and shudders while accelerating at operating temperature. I've disconnected/checked the sensors on the manifold, the 02 sensors, the evap purge solenoid...I absolutely can not wrap my head around this.
The weird part is that the car starts fine when cold, (with only a split-second hesitation if you goose the throttle) and will run great for about 10 minutes/until it warms up. Then,once it warms up it will jerk, shudder and not accelerate at all unless you knife the gas. After letting off the gas, it goes right back to "misfiring" and the light comes back on. I can shut the car off, restart it, and it will run fine until the accelerator is pressed.
Accent MC (2006-11) :: 2007 - Misfiring Codes P0300 And P0302
My girlfriends 2007 accent as thrown codes p0300 and p0302.
After reading everything I could find, I had coil pack on my list of possible problem items.
The car sat in the driveway yesterday and when she went to start it today, she couldn't get it to.
I got it to start when I got home by giving it some gas while turning the key, but I don't want to drive it anywhere.
The hard start is leading me to believe it's the coil pack.
I was going to start with changing the pcv, spark plugs, and run fuel injector cleaner through it because those are the cheap possibilities...but now may add in a new coil pack.
Accent MC (2006-11) :: 2009 Intermittently Misfiring And Burning A Lot Of Oil On Start Up
So I've been trying to get rid of the check engine light recently so I can get the car inspected. The car has about 130,000 miles. I was having problems with the car intermittently misfiring, and burning a lot of oil on start up. Also the car still had the original timing belt up until this time so I decided to change the valve seals and timing belt. I couldn't get the timing right so I took it to a mechanic and he got the car running like it was before I took it apart, although I don't think he changed the timing between the camshafts. The check engine light stayed on with p0016 as the code. The car accelerated poorly, but otherwise drove fine. I tried changing the camshaft sensor, and cleaning the OCV but that didn't work. So today I looked at the timing between the two camshafts and moved the intake cam over by one tooth which got rid of the p0016 code! Unfortunately the car decided to replace that with the p0340 code. I didn't notice any damage to the pins on the sensor. It seems to stumble for a bit after start, and when releasing the gas after revving the engine, but otherwise idles okay. I have yet to road test it.
View 4 RepliesCelica :: Engine Started Sputtering / Acting Like Misfiring
I have a 92 Celica ST 1.6L 5 speed with 175,000 miles on it. When should I consider getting the timing belt changed?
Also, several months ago the engine started acting up while I was on a long road trip, suddenly anytime I tried to accelerate the engine started sputtering / acting like is misfiring.. It got progressively worse during the trip, so I pulled over and to my surprise there was a significant amount of oil in one of the spark plug 'wells'. After soaking the oil up with a rag and cleaning the spark plug cable/connector the problem has only occurred one time since, and not nearly as much oil was present. It sound like I just need new spark plug cables.
Accent MC (2006-11) :: Cylinder 2 And 4 Misfiring Causing Car To Shake While Idling Or Speeding Up
Recently my car, after I put fuel into my car, my car won't start unless I apply the gas and then shift it into gear. I thought that perhaps replacing my spark plugs would fix this problem since it is about time for a tune up on my 2010 Hyundai Accent. About a week after changing the spark plugs I now have an error code that states that Cylinder 2 and 4 are misfiring and it is causing my car to shake while it is idling or speeding up. Also it is much slower than before to get it started from a stopped position.
View 11 RepliesAccent LC (2000-05) :: Engine Misfiring When Touch The Accelerator
I have hyundai accent 2005 1341cc 86hp, with BRC LPG kit. When i start the car at the morning, the engine misfiring around 500rpm for a few second (5sec-10sec)...
Sometimes the engine start ok in the 1100rpm - 1200rpm and when I touch the accelerator then misfiring again!
The car have 133.000km (11.000km with LPG).
I have replace the petrol filter 2 days ago and the all electric system without multiplier. I have clean throttle valve and the injectors with stp cleaner.
Accent MC (2006-11) :: Stutter Then Started Up
Just changed second timing belt on my Accent. When starting it up afterwards it stuttered then started up. Ran fine for 10 minutes parked it and went inside. Came out 10 minutes later and same thing stuttered to start but it did second time. CEL came on P0016. I know what the code is after looking it up, but I'm sure that the timing belt is set on TDC. Could it really be the camshaft position sensor or crankshaft position sensor? Didn't go anywhere near it when changing the belt.
View 8 RepliesLexus GS 2006-11 :: GS300 Engine Misfiring
I bought in my 2006 GS300 to Lexus dealer 2 weeks ago for the engine misfire issue and were told to call corporate 'cuz it's over the 9 yr period for 1 month. Called and told me to bring it back for inspection on the issue. Dealer performed the test and found the misfire, but got a call from dealer that they won't cover it because I missed it by 1 month. I had explained to the rep that we moved around quite a bit and found out about this not too long ago.
View 11 RepliesAccent MC (2006-11) :: CEL Came On And Started Flashing - Oil In Cylinder
Yesterday while driving my wifes check engine light came on and started flashing so she limped the car home so that i could take a look at it. I know from previous issues it was a sever cylinder misfire. I hooked up a computer to it and got codes for cylinder 1 &2 having misfires. So today i went and bought new plugs and 2 new ignition coil packs. when i took out the coil pack on cylinder 1 it was broken off and the top of the plug was broken. (nothing entered the cylinder and there wasn't any noticeable oil. But when i changed cylinder2's plug it was covered in oil... i changed the plug and coil pack and cleared the codes from the computer and started it. there was some blue smoke coming out the back (lots actually) for a min or 2 then went to regular exhaust. what would cause the oil in cylinder 2 and possibly 1?
View 4 RepliesAccent LC (2000-05) :: 2000 - Misfiring Upon Acceleration And Engine Revving
I have a 2000 accent. Automatic tranny with 167000 miles. My current problem is the car is misfiring upon acceleration and engine revving. I have to accelerate very slowly to minimize this but i once the engine revs up enough I can give it more gas and it will rev normally with plenty of power. I have had to unplug the maf to keep it driveable. Ive never had a car stay running after disconnecting the maf so this is strange to me. My accent barely stays running with the maf connected. I just got the car from my dad and he had it fixed and it ran good for awhile with the maf connected so I don't think it is the maf. But the same problem came about and we had to disconnect the maf again. And he cant remember or is not sure what was exactly fixed on the car. I've read up about the purge control valve and havent had a chance to check it out but some of the symptoms fit.
View 21 RepliesAccent MC (2006-11) :: Started Burning Oil At Startup / Hard Right Turns
After the -20 winter my 2009 Accent started burning oil at startup and after hard right turns. It was burning about 1 quart of oil per 500 miles. No codes ever appeared. I assumed that it was a pretty classic case of broken valve stem seals. Upon taking the valve cover off I found that there are two oil galleys leading back to the oil pan. One on the passenger side of the engine was exposed and had a large carbon deposit on the valve cover just above it indicating all the crankcase vapors were coming through that gallery and condensing. The galley was partially plugged. The other galley on the left side below the camshaft was completely plugged. Some cleaning first with a loop of welding wire and cleaning out the PCV chamber which was filled with oil has cleared up the problem. I followed with an oil change and then another change at 500 miles. I've used no oil in 1200 miles since the last change.
View 5 Replies