Accent MC (2006-11) :: 2009 - Low Purge Flow Error Code Popping Up
Not too terribly long ago I got assistance on identifying and fixing an engine misfire on my 2009 Accent. I assumed was directly connected has cropped up again - a P0497 Low Purge Flow error has come up on the car.
We recently replaced the purge flow valve, and everything seems to be running fine - there is no visible cause for the error, and I've even tried making sure I get the fuel cap as tight as possible.
The code is not popping up constantly - this is only the second time it's come up since the misfire was fixed(without obvious symptoms I always clear a code once just to make sure it wasn't a computer glitch), and the first time it popped up on it's own was the day after I fixed the misfire. Need to know what to check to find out what's wrong and, of course, how much priority I should place on fixing this issue.
Accent MC (2006-11) :: Low Purge Flow And Misfire - Transmission Shaky At Higher Revs
I have a 2009 Hyundai Accent 4-door 1.4L auto, 123,000 miles.
Before you ask: The high mileage is because it's used for a newspaper route. We(as in, myself and my father) take great efforts to keep it in as good a shape as possible given the amount of stress this puts on it - one minor deer impact aside, I think we've done a good job.
Recently(read: a week ago), we replaced the purge flow valve due to it causing stalls and difficulty starting after refueling. After a week of apparently fine operation, as I was nearing completion of the route, a very clear cylinder misfire began. Not the worst misfire I've ever heard - the car barely seemed to struggle on initial acceleration(except in reverse, which made me slightly concerned I wasn't feeling an engine issue, but a transmission issue), and only got really shaky at higher revs.
We have an OBD-II reader at home, so when I returned I plugged it and discovered not one, but TWO error codes: P0497 -low purge flow- and P0301 -Cylinder 1 misfire- with the reader listing them in that order.
Looking up information on these two being connected has turned up little support - I've only learned that either one can be cause and effect. Needless to say given timing I strongly believe that it is highly likely that we either made a mistake installing the new valve, or that the new valve was bad from the get-go.
We'll be checking the spark plugs as soon as we are able(I am about to go to sleep and my dad has work - we tag team automotive repairs since two sets of eyes and two brains can figure things out better and an extra set of hands is always good to have ready even if only one set can actually do the job), but even if the problem isn't the spark plugs, it doesn't automatically mean it's the purge valve, either - at least as I understand things.
So with the background out of the way, my questions are thus:
1) Is the spark plugs don't fix anything, what is the quickest way to figure out which error is cause and which error is effect?
2) Are there any serious risks to continuing to run the car in this state if a fix cannot be made immediately? (being able to borrow another car is possible, but problematic - need to stick with this car if safely doable)
Lexus GS 2006-11 :: Check VSC Warning - Incorrect Purge Flow And Gross Leak
About a month ago the "Check VSC" warning came on in my 2006 GS300 AWD. This happened after the car was in the garage all night and when I started the car in the morning. The car was at the dealer for 2 days and the saved codes showed multiple errors for the evap system, but they couldn't find anything specifically wrong and the light warning went off after all the systems checked out.
A week later the warning came on again, and the codes indicated incorrect purge flow and a gross leak. After 3 days in the shop they decided that the problem was caused by a faulty gas cap, which was replaced. You guessed it! A week later the warning came on AGAIN! I'm taking the car to the shop on Thursday. I'm really getting tired of driving my car 40 miles to the dealer just to have the warning show up again in another week!
Accent RB (2012+) :: Check Engine Light Came On - Purge Valve Replacement
So sometime last week my check engine light came on. Took my 13 Accent to the dealership and they said the purge valve is to be replaced. Now my Accent pings when running 87 gas and I read that others (not necessarily Accent owners) who changed their purge valve noticed the pinging go away.
View 5 RepliesAccent RB (2012+) :: CEL Code P0441 - Incorrect Purge Flow
My accent currently has just under 17k and about two months ago displayed a cel. I plugged in my innova 3100 code scanner and it displayed p0441. saying it was incorrect purge flow. My question is.. is this covered under the factory warranty. I'm on a very tight budget and I'm trying to find out before going in and finding out. I've owned Hyundai's since 2002 and so far have never paid for an out of pocket repair. But it doesn't hurt to check ahead.. And I've already gotten the standard "it's your gas cap". Ok I'd buy that if it was 10yrs old but it's only a yr and a half old. besides it only goes half a turn then clicks. so it kind of either seals or it doesn't.
View 3 RepliesPassat (B7) :: Check Engine Light Came On - Bad EVAP Purge Valve
I only have 2200 miles on my new 2012 Passat SE V6 and the check engine light came on the other morning. I took it in to the dealer and they found codes P0442 (EVAP Emission Control System Small Leak Detected) and P0456 (EVAP Emission Control System Very Small Leak Detected). The tech says on the work order that he removed and tested the EVAP Purge Valve with a vacuum pump and the valve would not hold a vacuum. The dealer replaced the EVAP Purge Valve under warranty. They say this is the first 2012 passat V6 they've seen with this issue. I've only had the car for 4 weeks.
View 5 RepliesAccent MC (2006-11) :: Check Engine Light Steady On
This morning started to drive to work and the check engine light came on or actually did not go off. Not sure which. Anyway it is a steady light not blinking and the car runs fine. Problem is that the warranty is out by about 3 weeks, not by mileage and I have an appointment at the dealer on Monday. If I take it to Partsource and have the code read will it delete the code or turn off the light. Just wondering as I don't want to spend money at the dealer if whatever is wrong is not covered under the emissions warranty if I can get the code and fix it myself. Don't want the code deleted either if the dealer needs it.
View 2 RepliesAccent MC (2006-11) :: Check Engine Light On / Flashing
As the title says, my CEL goes on and flashes too.
I've read up a bit on why the CEL comes on/flash and it says it has something to do with the exhaust system and if continue operating will damage the catalyst converter (which I don't understand since I'm a car dummy.
In addition, the engine vibrates like crazy. I can feel the engine vibrating when I'm inside the car as well.
I already got the car tolled to the dealership and they kinda just told me it might be misfirings and then they said they couldn't locate the problem. So my car basically has to stay there until they open again on Monday and hopefully they will figure out the problem/fix it under the warranty and call me back.
The problem arise late Friday night and I just did a 30K maintenance on Thursday. (but the car already has 43,000 miles on it).
Accent MC (2006-11) :: Check Engine Light Has Been On - Code VSS
My check engine light has been on for months and the only code coming up is for the VSS. I got the VSS replaced and the light came back on as soon as I hit 70 on the freeway. Checked the code again and the same one came up. Is this a common issue with 06 Accents? I'm wondering if it might be a wiring or computer issue... My ABS light is also on, would this have anything to do with it?
View 5 RepliesAccent MC (2006-11) :: Check Engine Light After New Air Filter
I just bought a used 2009 Accent. After a few months, I had it in for an oil change and the mechanic said there was NO air filter even installed in the car. Obviously I know enough that I need one, so I had one put in. Within a few miles of doing that, the check engine light came on. I took it to autozone and it gave error P0172 which appears to be an oxygen sensor. I would really like to know if it's possible the previous owner took the air filter out on purpose because they knew that the check engine light would come on if they put one in.... etc?
View 3 RepliesAccent MC (2006-11) :: How To Turn Off Check Engine Light
Today the CEL on my 2010 HB with 30,000km came on and the car ran rough like it had a bad spark plug. I went straight home and luckily had a set on hand and replaced them. Car now runs like before but the CEL is still on.
View 8 RepliesAccent MC (2006-11) :: Check Engine Light Has Been Coming On After Put Gas In The Car
I just bought a Hyundai Accent 08, and the check engine light has been coming on after I put gas in the car, it doesn't run poorly, it only happens after I put gas in the car. and usually after I drive it a while after. Not sure what is going on?
View 10 RepliesAccent MC (2006-11) :: Check Engine And Airbag Light Stays On
I have a check engine and air bag light that stays on. I was told if I dis-connect the battery, it will clear the codes. I need an inspection and I'm short of time.
View 1 RepliesAccent MC (2006-11) :: Check Engine Light Will Not Come On Instrument Panel
2007 accent GS check engine light will not come on the instrument panel. Showing a 650 code. What is wrong?
I bought the car a year ago. No check engine light? Could someone have dismantled the light?
Accent MC (2006-11) :: Got A Check Engine Light Code P0139
I did a spirited sprint from a stop light and then got this cel. It says it's for the second 02 sensor. I got home, jacked it up and checked it out. Everything looked, sounded, smelled, ran fine. What should I do?
View 28 RepliesAccent MC (2006-11) :: Check Engine Light Came On / Car Turns Off But No Codes
Our second car is a 2007 Accent, 125KM's (70 miles). Today the engine light came on, I drove it very slowly to my indy mechanic and she is not throwing any codes. Engine temp was fine and she just had an oil change.
Engine light turned itself off so I drive it home and on the way it's all good then suddenly .... she dies. She starts again and I get home, i idle in the driveway and she stays on but a little rough as she is sitting at 800RPM, is this right or a little low?
Accent MC (2006-11) :: Stalls When Idling - No Check Engine Light
So, I have a 2011 Hyundai Accent. It drives great. Until recently.
My wife noticed that it was cranking a little longer than usual before starting. Then, one day, I noticed it. So, I stopped the car and restarted it to see if it would happen again, and listen more closely. But, all ti did was crank.
I became upset and went in to do some research and make some phone calls. I came back out and voila, it magically worked fine again. Weird, I thought.
A few days later, no incidents. We go to the grocery store. On our way out, it cranks longer. This time I'm not going to restart it, I think. So, I start driving and everything is great. Except...it suddenly wasn't accelerating. It felt like it was in neutral for like 100 feet or so, then back to normal. We're making plans to take it into the shop at this point.
The next day, we go out to get coffee. Car drives great. On our way out, no problems. We stop at the red light, and it stalls. I have to push it into a parking lot and call the tow. Strangely enough, it starts again ten minutes later, and runs fine.
The stalling and being unable to start for tenish minutes phenomenon has happened three times.
We took it to the shop, it actually did this as I was filling up gas--stalled. I pushed it into a space and waited a few minutes, bam, it started up fine. The mechanic told me that the engine light had been reset. He couldn't figure it out. Said everything looked great.
So, the run down is this:
-My car stalls when idling, but only after it has been driven some, stopped, and restarted without a lot of time passing--like when you're coming home from the store or something, after it sits for 30 or 40 minutes.
-Once stalled, it will not restart again until a few minutes have passed --something like five to ten minutes.
-There is no check engine light. Fluid levels are good. Connections and whatnot, according to the mechanic, looked good.
-When it stalls, all the electronics stay on and work. The oil light and engine light pop up (like this key is in and turned part way), then it all goes away when the car restarts.
-the computer says that it was reset after it does this.
Elantra HD (2006-10) :: Check Engine Light At High Elevation?
I just completed my move from Pennsylvania to Denver CO, and my check engine light is lit up (orange) today. It wasn't on for the drive, but came on this morning when I started the car, after a few days in the parking spot.
I heard it might be a gas tank pressure thing, but the light is still on after filling up today. I'm sure it's a result of the thinner air up here, but should I be worried? Does this warrant a trip to a dealership? Or should I just stick it out until my next oil change (in maybe a month or so)?
Accent MC (2006-11) :: Chugged Along With Check Engine Light Flashing And Then Staying On
It happened randomly on the way home from work, the car chugged along with the check engine light flashing at me and then staying on. I was able to limp it home and got a ride to the nearest auto parts store to get some new plugs. I went with the NGK brand. Well, $60 later (including tools on the spot) and it's still running rough.
I know best case it to try and limp it to the autoparts store to let them try and pull the codes. I noticed an old thread where updates were made to the software to correct a running issue. I will note this same chugging randomly happened at 50,000 miles. I shut the car off, let it sit for a moment, restarted and it ran just fine. The engine vibrates noticeably just like it did at 50,000.
2009 Accent running rough 73,000 miles....