Accent RB (2012+) :: CEL Code P0441 - Incorrect Purge Flow
My accent currently has just under 17k and about two months ago displayed a cel. I plugged in my innova 3100 code scanner and it displayed p0441. saying it was incorrect purge flow. My question is.. is this covered under the factory warranty. I'm on a very tight budget and I'm trying to find out before going in and finding out. I've owned Hyundai's since 2002 and so far have never paid for an out of pocket repair. But it doesn't hurt to check ahead.. And I've already gotten the standard "it's your gas cap". Ok I'd buy that if it was 10yrs old but it's only a yr and a half old. besides it only goes half a turn then clicks. so it kind of either seals or it doesn't.
View 3 RepliesToyota - Camry :: Evaporative Emission Control System Incorrect Purge Flow
The check engine light on my 99 Camry went on at about 180,000 miles. My mechanic checked the code and turned up an EVAPORATIVE EMISSION CONTROL SYSTEM INCORRECT PURGE FLOW He said this could be any number of things,including the need for a gas cannister or some type of valve. What does this mean? How do you determine exactly what the cause of the problem is? What are the likely fixes? Will Toyota be able to better determine the cause than my personal mechanic? What are the best options?
View 5 RepliesSanta Fe (CM - 2007-12) :: P0441 CEL Code - Evap Emission System Incorrect Purge Flow
Just received a P0441 CEL (Evap Emission System Incorrect Purge Flow). I have a 2.7l engine, 2WD. I've read other forums and it seems it's most likely the purge valve or charcoal canister.
View 7 RepliesSanta Fe (CM - 2007-12) :: CEL On With Code P0441 - EVAP Emission System Incorrect Purge Flow
I've had the check engine light come on and was told it was probably from topping up too much and that it would go off on it's own... I should say I have no issues with idle or rough starts.
I had it scanned at Auto Zone. The print out shows: "EVAP emission system incorrect purge flow probable cause
1) Faulty purge control solenoid
2) Faulty vent solenoid
3) Blocked vapor canister
Previous posts suggest if it were a blocked vapor canister I'd have trouble completely filling the tank so I am hoping it's one of the others. Almost everything I see suggests the purge control and that looks like an easy fix. My concerns are a) if it is the vent solenoid - how hard is that to get at and b) what is the part number as I can't find it listed anywhere? I want to have both on hand before I start trying to fix this. Lastly if it is the vent solenoid should I just give up and see a dealer??
Accent MC (2006-11) :: Check Engine Light On / High Purge Flow
For the past couple weeks my check engine light has come on due to the code reading high purge flow sensor. I checked my gas cap, lines that run from motor to the gas tank and the purge flow that's under the intake. Can't figure out what is exactly going on. And it has 53k miles and runs just fine...
View 6 RepliesPassat (B5) :: V6 - Check Engine Light / Incorrect Flow
I know that the air injection system is supposed to kick on during a cold start, which it does, but i get the check engine code that it has "incorrect flow"...... What could this be?!
View 2 RepliesAccent MC (2006-11) :: 2009 - Low Purge Flow Error Code Popping Up
Not too terribly long ago I got assistance on identifying and fixing an engine misfire on my 2009 Accent. I assumed was directly connected has cropped up again - a P0497 Low Purge Flow error has come up on the car.
We recently replaced the purge flow valve, and everything seems to be running fine - there is no visible cause for the error, and I've even tried making sure I get the fuel cap as tight as possible.
The code is not popping up constantly - this is only the second time it's come up since the misfire was fixed(without obvious symptoms I always clear a code once just to make sure it wasn't a computer glitch), and the first time it popped up on it's own was the day after I fixed the misfire. Need to know what to check to find out what's wrong and, of course, how much priority I should place on fixing this issue.
Accent MC (2006-11) :: Low Purge Flow And Misfire - Transmission Shaky At Higher Revs
I have a 2009 Hyundai Accent 4-door 1.4L auto, 123,000 miles.
Before you ask: The high mileage is because it's used for a newspaper route. We(as in, myself and my father) take great efforts to keep it in as good a shape as possible given the amount of stress this puts on it - one minor deer impact aside, I think we've done a good job.
Recently(read: a week ago), we replaced the purge flow valve due to it causing stalls and difficulty starting after refueling. After a week of apparently fine operation, as I was nearing completion of the route, a very clear cylinder misfire began. Not the worst misfire I've ever heard - the car barely seemed to struggle on initial acceleration(except in reverse, which made me slightly concerned I wasn't feeling an engine issue, but a transmission issue), and only got really shaky at higher revs.
We have an OBD-II reader at home, so when I returned I plugged it and discovered not one, but TWO error codes: P0497 -low purge flow- and P0301 -Cylinder 1 misfire- with the reader listing them in that order.
Looking up information on these two being connected has turned up little support - I've only learned that either one can be cause and effect. Needless to say given timing I strongly believe that it is highly likely that we either made a mistake installing the new valve, or that the new valve was bad from the get-go.
We'll be checking the spark plugs as soon as we are able(I am about to go to sleep and my dad has work - we tag team automotive repairs since two sets of eyes and two brains can figure things out better and an extra set of hands is always good to have ready even if only one set can actually do the job), but even if the problem isn't the spark plugs, it doesn't automatically mean it's the purge valve, either - at least as I understand things.
So with the background out of the way, my questions are thus:
1) Is the spark plugs don't fix anything, what is the quickest way to figure out which error is cause and which error is effect?
2) Are there any serious risks to continuing to run the car in this state if a fix cannot be made immediately? (being able to borrow another car is possible, but problematic - need to stick with this car if safely doable)
Honda - Element :: 2006 Oil Leak - Purge Control Valve
2006 Honda Element 2.4 ... I developed an unknown bad oil leak. Low oil indicator light did not come on. Highway drove it down to one qt. Now blowing blue smoke and lost power. Why my oil light did not come on?
Also, I have needed a purge control valve for quite some time. Could this of caused the oil leak?
Lexus LS 2007+ :: Check VSC System Warning - Abnormal Leak In Accumulator
2 days ago I was driving my car back home and suddenly Check VSC System" Warnings “appear on screen, it’s the first time gotten this warning displayed while driving.
I went to one of Lexus Maintenance repair agency and they started to do the Computer check and following that an error message showed “Abnormal Leak in Accumulator” and he showed me the location of that part on my car Part No 44510-50070 & PK031-353 and the price of this part about 1600$ the Engineer said! Or to go for a second hand one..! I did some search and find out that this part it is not that easy to be damage..
my car is LS 460 L 2007
Ford - Escort :: Code P0455 (Gross Evap Leak)
Car has about 75K miles. Son has the car out of town (again), at school. He reported CEL (SES?) light on; "what should I do?" Told him to have it checked. He has trusted mechanic nearby, so I told him to go there. They say they don't just read codes ("You can get Autozone to do that"); they do diagnosis.
Report: Code P0455 (gross evap leak). Did smoke test; nothing. "Did you maybe have it running when you filled gas tank?" (No.) They reset the CEL, and sent him on his way.
Should we be satisfied if CEL stays off? What else to try or to look for if same code comes back?
Ford Escape / Hybrid :: EVAP Purge Flow Valve Sticking
Replacing part 9C915 ?
"CODE P0443 canister purge fault" diagnosed....
Found: EVAP PURGE FLOW VALVE STICKING
Recommending: "Diag, Replace sensor then retest" ....
They want to install a new 9C915 which they called in hand writing a Canister purge sensor but I've seen it called a canister purge valve on another thread by FIREME who puts 9C915 as "toward the driver's headlight assembly, near the radiator. You'll need an 8mm socket to remove it"...
3.0L DURATEC FFV V6 ENGINE
From the "newly washed ashore" who's now double posting after being flogged for trying to keep this info in a single thread rather than spreading it all over the place...
Golf IV R32 :: Code P0441 - EVAC Control System / Incorrect Flow
Check engine light came on the other day. Brought the car over to autozone and this was the code that came back. P0441 EVAC Control System; Incorrect flow. Where I should start looking?
View 3 RepliesElantra XD (2001-06) :: P0441 Code Flow Fault - Changed Purge Valve
I have a 06 Elantra having a problem with a p0441 code flow fault I changed purge valve and canister purge valve I don't know what else to do what else can I do to get it to go away permanent so I can get car inspected no codes for my car can be on but only 1 i/m
View 3 RepliesFord Ranger / B-Series :: MIL P1444 Code - Faulty Purge Flow Sensor
So I had a post up saying "is MIL P1444 a urgent fix" and I got "no". On an other website though it said that it was an urgent fix. They said it was "similar to running a bad catalytic converter. You don't want to do it."
P1444:
Possible causes
- Faulty Purge Flow Sensor
- Purge Flow Sensor harness is open or shorted
- Purge Flow Sensor circuit poor electrical connection
So I located the purge flow sensor and look at the tube that connects to that,the canp solenoid, and the carbon canister. Nothing looks bad, but I did notice that the tube that connects to the carbon canister to the solenoid is not connected. The part that connects to the carbon canister dry rotted off. So I turned on my car to see if anything was coming out of that tube or air and there was nothing (not sure if that's good or bad). Also a week ago when I filled up my gas tank (before the check engine light was on) a lot of fumes were coming out of the tank while pumping.
The scanner i use also lists the secondary air system, the EVAP system, Heated catalyst, and the AC refrigenant has red X's, but they weren't continuous.
GTI 337/20th Anniversary :: 2005 GLI 1.8t - Secondary Air Injection System / Incorrect Flow Detected
Chassis Type: 9M - VW Jetta IV
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75 76
Address 01: Engine Labels: 06A-906-032-AWP.lbl
Part No: 06A 906 032 RN
Component: 1.8L R4/5VT G 0001
Coding: 07510
Shop #: WSC 00066
3VWSE69M14M129075 VWZ7Z0D9541648
1 Fault Found:
16795 - Secondary Air Injection System: Incorrect Flow Detected
P0411 - 35-00 - -
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 56: Radio Labels: 3B7-035-1xx-56.lbl
Part No: 3B7 035 180 G
Component: RADIO 3CP 0007
Coding: 00031
Shop #: WSC 00066
1 Fault Found:
00856 - Radio Antenna
36-00 - Open Circuit
End ---------------------------------------------------------------------
Golf IV / Jetta IV :: CEL Code P0411 Secondary Air Injection System Incorrect Flow Detected
I got 2001 vw jetta 2.0.. I keep getting check engine light,,when i scan it keep saying P0411 Secondary Air Injection System Incorrect Flow Detected. i replaced new smog air pump, and new egr valve and today i was driving car and i got check engine light, its still same code.
View 4 RepliesGolf IV / Jetta IV :: 2004 - P0411 Code / Secondary Air Injection System Incorrect Flow
2004 VR6 24v ... I had another thread about my son's car stalling after driving about 20 miles and then running good again after letting it sit for a couple of hours. Anyway I changed the Crank Position Sensor and I have been driving it work and back the last couple of days so I am starting to relax that the CPS fixed that problem. Won't be positively sure for a while as the problem took a while to occur. So far so good.
While coming to work today the car picked up the P0411 code, secondary air injection system incorrect flow. When I changed the CPS sensor i unbolted a module underneath the car by the oil filter to get better access to the CPS. I did not remove it, just unbolted it so I could push it out of the way about and inch.
After putting it all back together and driving it for several trips with no stalling this P0411 comes on. Is that module I moved the Secondary Air Pump and could I have disturbed something. I will check it when I get home. How critical is that code. I read where it works to warm a cold engine. What effect would there be driving with that code?
Lexus GS 2006-11 :: Check System Warning Display On Dash
I have a "check system" warning on my dash, does it mean that my tire sensors are bad?
View 7 Replies