Buick - Rendezvous :: 2004 - Turn Signal And Brake Lights Don't Work / No Clicking Sound
I turned the car on this morning and my turn signals don't work, there is no clicking sound when I flip the left or right signal and when I step on the brakes the brake lights don't illuminate. Needless to say the cars behind me don't like it when I slow down to make a turn. Can't be the bulbs and the symptoms make me think it is more than a fuse.
View 3 RepliesMalibu - Chevrolet :: Turn Signals Work Periodically
I have a 2003 Chevy Malibu - periodically, they turns signals decide not to work. I don't know that one thing in particular causes them not to work. What could be the issue and is this something I can fix easily (I'm a novice), cheaply and quickly myself?
View 2 RepliesChevrolet - Optra :: 2007 - Hazard Lights Won't Work Unless The Turn Signal Switched On At The Same Time?
I have a chevrolet optra 2007 and the hazard lights won't work unless the turn signal (left or right) is switched on at the same time. Turn signals work perfectly fine.
View 7 RepliesChevrolet - Malibu :: 2004 - Blinkers Making Sounds And Won't Work - Theft System Light Comes On?
2004 chevy malibu classic... My blinkers make weird sounds and does not work half the time unless i hit the hazard lights. problem two theft system light comes on and stays on. problem three shut off car to re-start i think i can i think i can then start no problem after words. fourth problem the seat belt buzzer wont stop have to play with key in ignition.
View 1 RepliesFord Excursion :: Right Turn Signal / Hazard / Brake Lights Do Not Work
I have a 2003 V10 Excursion with an electrical problem. The right turn, right brake and right hazard light do not work but the flasher makes the clicking noise. When the right turn signal is on, the right front turn signal light works but is at double speed. The right rear light does not work. Same when brake and hazard are applied.
I checked the bulb socket with a multi meter and have no current. I also checked my trailer plug and have all functions work. Fuses were checked also for the brake circuit and were all ok.
Ford - Explorer :: 2003 - Left Rear Turn Signal Brake Light Will Not Work
My wife's 2003 sportrac has developed a problem. The left rear turn signal brake light will not work. The tail light does. When you turn on the left turn signal the front bulb and the dash light flashes real fast. I have changed both, the front and rear bulbs with no luck. I've read on here about the tilt steering column deal. I have moved the steering column while operating the turn signal with no change.
View 4 RepliesFord F-150 - 1997-2003 :: 1999 - Brake And Turn Signal Don't Work On Passenger Side?
I have 1999 Ford F-150 xlt and on the passenger side the brake and turn signal don't work but reverse light does. On the driver's side, everything works so I switch bulbs and outlets and it still doesn't work but two of the wires for trailer hook up and cut. I was wondering if that had anything to do with that.
View 2 RepliesFord F-150 - 1997-2003 :: Driver Side Brake Light And Turn Signal Doesn't Work
I have checked all wires for krosion and fuse's are good so confused! Just put brand new tail lights bulbs in! The top one comes on as a running light but nothing else works. I also checked under hood fuses too!
1.Only Hazard light that works is on the Right Front passenger side.
2 Drivers side Brake Light & Turn Signal Doesn't Work. But passenger works fine! Left turn signal is out and blinks really fast!
3.Passenger Side Overhead Outside Light on cab is out . Okay that's probably just a bulb!
Ford Wiring/Electrical :: 2005 F250 - Rear Turn Signal Signals And Brake Lights Don't Work
I just bought an 05 F250 XLT. I noticed tonight that the rear turn signals and brake lights don't work.
The front turn signals work fine, although they flash fast. I know that usually means a light on its way out. neither taillight flashes though, which puzzles me.
My second issue is that, of the 3 brake lights, only the high mounted light illuminates when I hit the brakes.
Ford F-150 (2004-2008) :: Tail Light Does Work For Hazards / Turn Signal Or When Braking
I have a 2004 F150 XLT and the passenger side tail light doesn't work whatsoever. The light does work for hazards, turn signal, or when braking. The passenger front turn signal works, so does the front and the driver sides tail light. Only the 1 tail light doesn't work. I bought a new brake light bulb and it didnt't fix it, so i swapped the drivers and passengers bulbs out, and it still didn't work. I replaced the 10 amp fuse (#36) in the fuse box. What is causing the problem.
View 2 RepliesMalibu :: 2005 - Constantly Making Turn Signal Clicking Noise
My 05 Malibu classic is making the turn signal clicking noise constantly which then causes the warning chime to start going off. I have replaced the turn signal assembly three times and each time it fixes it for a short time then it starts again.
View 4 RepliesFord - Explorer :: 2004 - Right Turn Signal Comes On With Brake Lights
It only does it when it is fairly cold out and when it sits overnight. I will get into my 2000 4.0 Explorer and when I put my foot on the brake my right side turn signal comes on, it doesn't flash it just comes on and stays on. When I let off the brake it goes out. It will do it maybe four or five times and then work fine all day. Its just the right side and the indicator on the dash comes on too. I haven't looked at a wiring diagram yet to see if there is a connection between the two.
View 7 RepliesFord F-150 (2004-2008) :: Left Rear Turn Signal And Brake Light Quit Working
I have a 2006 F150 and the left rear turn signal and brake light has quit working. Also the license plate lights do not work. The cruise will disconnect when signalling a left turn. I have checked fuses and bulbs and the wiring/connector at the multifunction switch with no luck.
View 2 RepliesFord F-150 (2004-2008) :: Turn Signal And Brake Light On Left Side Stopped Working
My trailer left turn signal and brake light stopped working. The running lights work on the trailer. The lights all work on the truck. I am hooked up to a 2007 F150 and it all worked 'yesterday.' not sure where to start.
View 6 RepliesMalibu - Chevrolet :: 2001 - The Brake Pedal Would Drop To The Floor While Driving
I bought a 2001 chevy malibu about a month and a half ago.when I test drove it,didnt notice any problems or leaks...after driving it for a 2 weeks...the brake pedal would drop to the floor while driving and then if I hit it again real quick it would be ok...this problem would happen now and then....we replaced the right front caliper thinking that it was sticking and bled all the brakes..There was air in the system..everything was fine for about two more weeks then while driving the pedal would get hard when applied and then drop again..not all the way to the floor,and it alternates that way..what are your thoughts? I don't have much money to fix this problem.
View 14 RepliesFord F-150 (2004-2008) :: Brake And Turn Lights Won't Work
The brake and turn signal lights on my 04 f150 quit working. I've replaced all of the fuses and relays I could find from the owners manual. The windows have also quite working. What may be wrong?
View 9 RepliesChevrolet - Malibu :: 2002 - ABS Light On / Brake Pedal And Steering Wheel Shakes
When I have to push on the brakes for a hard stop, I can feel the brake pedal and the steering wheel shake a whole lot. Also, he ABS light is on. Correlation between the 2 obviously?
View 10 RepliesIntrigue :: Passenger Side Turn Signal Does Not Work
My passehger side front turn signal does not work. I am not getting power to the turn signal part of the bulb everything else works running light cornering light ect. except no power at the plug for the turn signal that plugs into light bucket assy. The arrow in the dash blinks fast as if the bulb was blown, getting power to the rear but not the front....
View 5 RepliesCamry :: Modify Turn-signal Flasher To Work With LED Bulbs
I want to install some LED turn signal bulbs and lights but the flasher will flash twice as quick because of the burnt-bulb detector.
I have taken the flasher apart and tried all the tricks on the book to isolate each pin on the IC and changed the timing resistor without avail. I do not want to put in load resistor on the bulb end to fool the detection circuit.
I want to modify/cut off the detection circuit?