Lexus RX 2010-15 :: 350 Front License Plate Holder?
After going through the car wash several times now in my 2010 RX 350, my front license plate has been bent in all different directions. Car wash guys say it's due to not having a full plate holder, where as 4 screws secure the plate vs. only the top 2 as we have. Any plate holder from another vehicle that I might adapt to overcome this?
View 14 RepliesGTI 337/20th Anniversary :: How To Get Off Front License Plate Holder
Ok, Im trying to get my front licence plate holder off. I've looked in all the DIY forums and cant find what im looking for. My question is how do i get this thing off?? I've took the two screws that hold the thing to the bumper off, and its still soild as before i took the screws out. Is it held on by the rub strip?
View 24 RepliesAccord :: 90 Honda - Tail / License Plate And All Marker Lights Won't Go On
I have a 90 Honda Accord and can't figure out why the lights aren't working. I have no computer codes and all the fuses are good. The headlights, brake, turn signal lights, hazards and interior lights work fine but the tail lights, license plate lights, and all marker lights won't go on. I only noticed by a chance walk around on the car. I've checked every fuse inside and outside fuse panels. The hazards and brake lights going on makes me think that it can't be a ground problem.
I have spent a lot of time trying different things and checking wires andd fuses and can't find any problems. Is there a relay or something for the marker lights?
Lexus GS 2006-11 :: Bottom Of Cup Holder Is Melted
I came into my car, I was cleaning my cup holder and the bottem is MELTED! All I keep there is GUM and drinks. The melted plastic is the same dent as if I staked the gum box. What kind of cheap plasic is Lexus using? I can't believe its gotten THAT hot in the car. Heck, I would figure other things to melt first. To top it off, the gum box looks ok. No plastic smell from it either.
View 14 RepliesCamry 2012+ :: 2013 SE Headlight Bulb Holder Melted
Unfortunately my HID bulb wasn't secure in the headlight assembly and melted the part that holds the bulb in place in the headlight assembly.
My question is if that part that retains the bulb is replaceable or I will need to replace the whole head light assembly? ( The wire connector is fine.)
If the part is replaceable, What is the name or part #...
Regal :: 99 - How To Change License Plate Bulbs
How to change license plate bulbs? The little clear covers dont seem to pop off ........
View 3 RepliesCamry :: Can't Remove License Plate Screw
Was trying to remove the licenses plate screws today. One comes out easily, the other won't budge. I've sprayed a couple of times with WD40 but its still stuck.
View 14 RepliesPassat (B6) :: LED License Plate Lights Not Working?
So I bought LED license plate lights, the same ones Track5tar has (who sent me the link to get them). I got em off the bay, and I put them in and they don't work! The Heatsink gets hot but the lights don't light up in both of them!
View 24 RepliesPassat (B6) :: License Plate Lights Won't Turn On
So I was replacing the lights with the new leds change one toke some pics to compare. Everything fine...
Removed the other feston put the new led and they won't turn on anymore..
Change them back. Put them upside down, up, sideways... Nothing
Check all three fuse boxes all ok
Every other light on, inside trunk on, side markers on...
Everything but the license plate lights.
Touareg :: License Plate Lights Not Working
Bulbs are fine, I turned the light switch from off to on (12 o'clock position) and they flicker for a split second. What can be wrong? I checked the harness on the rear hatch and it looks fine. Maybe the switch itself?
View 2 RepliesGolf/GTI VI :: License Plate Bulbs Don't Work - Fix?
So I took my GTI in for my 10k service and to have them fix the wastegate rattle and the subframe shifting. They fixed the wastegate by installing the clip but didn't have the shims in stock for the subframe so I need to go back anyway, but I'd really like to fix my license plate lights before then.
Is there a possibility the tech could have accidentally unplugged a cable for the lights when he was rotating the tires or messing with the wastegate, etc? Maybe a blown fuse? I'm running LEDs and I already tried putting the incandescent bulbs back in but they don't work either.
Camry 2012+ :: Front License Plate Mounting?
Mounting front license plate somewhere other than the "official" mounting location? I don't like the thought of putting holes in my front bumper. I can move it down a bit such that the holes are in the bumper just above the air opening. So, they would be less noticeable. This would block some of the airflow through the lower opening. But, unless I'm driving in 100+ deg temps, it probably won't matter.
I could also offset it to the right or left in the lower opening.
Camry 2012+ :: Tow Hook License Plate Mount?
where to get it? I want to plug up my bumper holes and just put the plate on the tow hook.
View 14 RepliesGolf/GTI VII :: License Plate Frame And Tow Hook Mount?
Where i can get my hands on a Fukengruven license plate frame?
Any pics of the Platypus tow hook mount on their car?
Lexus ES 2007-12 :: How To Change License Plate Bulbs
How do I change my license plate bulbs in a 2010 ES350? I bought some 194 JDM Astar LEDs. I took off liner and changed backup bulbs but can't figure out how to change license plate bulbs.
View 4 RepliesPhaeton :: Filling Holes Of Front License Plate
I plan to remove the front license holder from my car, fill the holes, and paint/clear coat/sand them. Any recommendation as to what to fill the holes with (I'm not going to use a plug.) Exactly what the bumper cover is made of, I can find the right material to bond to it.
View 2 RepliesGolf V R32 :: License Plate LEDs Went Haywire - Dim Light
I ordered an LED interior package from Deautokey and they also came with license plate LEDs. The interior looks great, the license plates looked great except for one thing, the right side was slightly yellower than the left. So I contacted Deautokey and they sent me two new ones:
These are identical to the original LEDs except in the old ones the squares are arranged in a diamond pattern but I don't think that matters.
Tonight, I was replacing the right side LED hoping that replacing one is all I had to do to match colors but in order to see better I kept the plate lights on. Well when I went to pull out the housing I forgot that they were still on and pulled it out anyways, there may have been a noise when that happened but I forgot.
I put the new one in, turned the plate lights back on and found that it was dim, I rotated it and same look. I tried the second replacement, equally dim, so I thought "okay, I'll just give up and put the old ones in." Did that and they are now these ones became dim!
What happened!? Did pulling it out while it was still on (only did it that first time BTW) mess something up? Did the new ones being in there mess something up? There is no warning light or message in my instrument cluster.
Lexus GX 2004-09 :: Can't Get License Plate Light To Stay In
I'm in the process of replacing license plate bulbs. I broke the old housing for one of the bulbs so I bought new LED lights on eBay and they came with the housing. The problem is, I can't get the cover to stay clipped in to the tailgate. How to get the lights to stay in? What am I doing wrong?
View 7 RepliesGolf/GTI VI :: Getting License Plate Lighting Short Error?
I have vagcom and led bulbs in my gti. I turned off the plate light monitoring erased the code and get errors for plate lighting short and the 2 bulb errors. When I put the stock bulbs back I still get plate lighting short error on vagcom but no bulb warnings, why that's happening even though all the lights turn on and function fine?
View 6 Replies