Subaru - Outback :: Grinding / Rattling Noise When Shifting And Cruising At Low Speeds
Three days ago my Outback started making this grinding/rattling (hard to describe) noise when shifting and cruising at low speeds. Is this the clutch or the transmission? No trouble shifting though. I got rear-ended by a big Lexus SUV last week, but wouldn't think that would have anything to do with it. Just damaged the bumper a little.
View 1 RepliesSonata NF (2006-10) :: Grinding Noise When Releasing Foot Brake In Park
This noise started this week. Grinding when I take my foot off the brake when in park and parking brake set. What is causing it?
A guy at work said brakes. The front brake pads were replaced last year. Original rear.
Just over 90,000 miles.
Sonata NF (2006-10) :: Grinding And Banging Noise When Driving At Low Speeds
A few days ago, my Sonata 2006 LX started making weird noises when driving at low speeds. The noise comes from the front driver's side area, they are not affected by steering or going over bumps. Usually get less intense when I accelerate or brake. At speeds around 5 mph, the noise is grinding and pretty loud. At higher speeds, it's more like banging and it's frequency increases with the speed. There was no effect other than the noise, but the last day at higher speeds, I can feel with the steering wheel a little vibration sometimes from the banging.
I've been having tough times renting a car during the weekend and I still drive on short distances, but I'm afraid it could be a safety issue or that I can be making things much worse to repair. The noises got worse since the beginning, but I don't think they are getting any worse anymore.
Toyota - Sienna :: 2000 - Grinding Noise While Cruising
My 2000 Toyota Sienna has been making some concerning noises. It makes a periodic grinding noise, the period is related to the wheel speed...i.e. the noise happens once each time the wheel goes around. I can hear it while I drive, and it's even louder when I roll down the windows. The weird thing is that the noise stops when I hit either the breaks or the gas. First mechanic says that the wheel bearings are shot, and the second says they're fine. There is no "jet engine taking off" noise that I am told is typical of shot bearings, but there is a wump-wump-wump noise at higher speeds.
View 1 RepliesSubaru - Forester :: 2006 - Brakes Inconsistently Making Dragging / Grinding Noise When Coming To A Stop At Low Speeds
I have a 2006 Subaru Forester with 115K miles. It's been well-maintained and well-loved.
For the past few months, the brakes have been inconsistently making a dragging/grinding noise when coming to a stop at low speeds (<5mph). It sounds to be coming from the front half of the car - I can feel it vibrating a little near the driver side. We've taken the car in to be looked at three times - each time, the mechanics think they've heard the noise and report there is absolutely nothing wrong with the brake pads or rotors. Twice they reported a shim was out of alignment. After the last shim adjustment, the noise got a little better - instead of grinding, it's more of a dragging sound now. Because the noise is inconsistent, I haven't been able to crack the formula of the conditions that produce it, other than that it only happens as I'm coming to a stop at very low speeds.
Is there something besides the brakes we should be having inspected? Does this sound safe to drive?
Touareg :: V6 Grinding / Vibration At All Speeds
Lately, Im noting a grinding like feeling at all speeds. Its as if something in the wheels/drive train isn't smooth (like a busted bearing) and there is a low grinding noise that is consistent with the engine revs. I can feel it in the gas pedal and on the shifter when I place my hand on it.
View 2 RepliesCamry :: 2002 - Low Grinding / Rattling Noise In 5th Gear When Cruising On Highway
I've got a 02 Camry with a manual. In 5th gear, cruising on highway, there's a low grinding/ rattling noise. it doesn't do it if you try to accelerate, or if you have no throttle input at all, meaning it only makes the noise when trying to keep one speed, typically around 2000-2500 rpm. If i grab the shifter and apply pressure in any direction, the noise goes away. I've owned the car for 3 years now and its always done it, and hasn't gotten any worse or changed at all. I'm experiencing no performance issues and just chalked this up to gear noise, but recently read someone else was having same issue, and everyone was clamoring on about needing new bearings.
View 14 RepliesTouareg :: Grinding / Scrubbing When Turning At Low Speeds
Brought my Treg in for service today for a host of things:
Grinding/Scrubbing when turning at low speeds. TPM Pull to the right/Alignment/Uneven tire wear.
Limited remote range
Drivers side whistling noise when fan speed at 3-4 bars and windows are closed
Service Advisor tells me the Transmission Control Module is the cause of the scrubbing/grinding at low speeds. I have seen the posts with respect to the Stepper motors.
Tiguan :: 2009 - Revs Drop To Idle When Cruising And Taking Foot Off Gas
I have a 2009 Tiguan Auto Diesel and have noticed recently that, when cruising along, if I take my foot off the gas pedal the revs drop to idle. The revs only pick up again if I touch the accelerator. Im sure it did not used to do this. If you feather the gas pedal to maintain a set speed (say 50mph) then this can have the effect of the rev counter dropping to idle and going up again to, say 2500 rpm all the time.
The rev counter seems to be all over the place!!! I also had a stall situation the same day. I was leaving a driveway to join a main road. The driveway is on a slight incline when exiting. I nudged up to the kerb line as normal and then took my foot off the gas to check noting as coming. Nothing was so I accellerated gently and the car stalled. I think this is related.
The Tigual Auto box is not DSG it is regular Auto and it is also 4motion. I have noticed the haldex doing its thing in D2 when pulling off, you know that weird bit where the revs drop a bit even though the gear is not changing. This is a little similar to that but not the same....
Touareg :: High Pitched Squeak / Squeal Noise When Stopped With Foot On Brake
Reading thru all the squealing noise posts made me want to ask about mine. I have started to notice a high pitched squeal/squeak that occurs while sitting stopped with your foot on the brake...then let off the brake and take off and get this momentary squeak that doesn't continue (at least I can't hear it). It seems to stop once you get going again.
Seems to be coming from the passenger side front. I think I started noticing this after my most recent tire rotation and balance. What the brake wear indicator sounds like or if I will get an icon on the mfi when the brakes need service. The brakes do not squeal when in use. I currently have 27000 miles.
Passat (B6) :: Metal Grinding Noise At Low Speeds?
Ok so 11 days into ownership and only slightly over 800 miles the car started to act funny. First the common DVD nav issue (no disk in drive message).
Second issue is a strange metal on metal rubbing noise when turning at low speeds (i.e. in parking lots). When I make a big turn (either direction) it sounds like either the brake calipers aren't releasing fully and is causing the pad and disk to rub, or something else is rubbing.
This actually happened once yesterday on the highway as well. going 75mph, a very loud metal on metal rubbing noise.
Seems to only happen when temps outside are below 40. It warmed up yesterday afternoon and the noise went away, but after it got cold again last night, the noise came back.
Passat (B7) :: Grinding Noise When Turning Right At Low Speeds
I have a 2013 Passat TDi SE with about 64000 miles on it and 20 rims. I noticed a grinding noise when turning right at low speeds. It was a very slight noise at first, but has gotten louder over the past 1-2 months. The grinding noise sounds like it's coming from the back of the car and only at fairly tight turning radii, with speeds 10 - 20 mph (think going up the levels of a parking garage). What could this be????
Other things to note:
No other noises, vibrations accompany the sound.
I do get the steering rack creek when turning lock-to-lock, but this sound is definitely not that sound.
I mentioned I have 20 wheels thinking that might have something to do with it. They don't rub at all going in a straight line, however.
Sound is only present when turning right.
Sonata NF (2006-10) :: Engine Noise At Cruising Speed
I did a search and what I saw all had to do with noise at startup.Mine is during cruising. I have a 2007 Sonata 4 cylinder with 112K miles. Within the last few months it began making a slight chattering noise when I accelerate and when cruising. It's worst around 55mph. When I let off, it almost goes away, but is loudest when I just am feathering the pedal to maintain speed.
If I put the pedal down a little more and accelerate, it is not loud, but still faintly there. At first I thought it was a tapping sound, but I've let some of my friends listen and its more like a clattering, metal rattling, or vibration perhaps. Its hard to describe. A week ago I had the check engine light come on with a "P0011 Hyundai - 'A' Camshaft Position Timing Over-Advanced Or System Performance Bank 1".
I changed the oil and took it into a local shop and they cleared the code/light and checked things out (the light hasn't reappeared). I had them take off the valve cover and make sure the top end was not making the noise. It seemed fine to them. They suggested I take it to the dealer for further diagnosis. I have not yet. It does not make noise during start up. If I have time I will upload a audio recording later. What may be making the noise? It seemed to get a little louder after the latest oil change, but that's probably me being more sensitive to the problem.
Camry :: 2003 - Awful Grinding Noise At Low Speeds
I'm going to start tearing into my wife's car this weekend because the bearings are making an awful grinding noise at low speeds, so I feel like this needs to be done soon.
I bought from rockauto new hubs and bearings, but looking at them, it seems like the bearing goes over the outside of a shaft on the hub. Other that than, I'm not really sure how it all goes together until I look.
Just curious as to whether this can be done without a press or any special tools? I have an impact gun and all the sockets one could need, but I don't have a hub puller or bearing press or anything like that.
I've done a bunch of searches but can't seem to really find the answers I'm looking for...
Tiguan :: Steering Making Grinding / Rubbing Noise At Low Speeds
The steering on my wife's 2010 Tiguan makes a bit of a grinding/rubbing noise at low speeds? Something isn't right, it sounds the same way my X5 did when the Rack needed to be replaced. It would be strange to have 2 cars needing new racks within the same year....especially since they are both 2010 model.
View 9 RepliesHyundai - Elantra :: Grinding Noise When Accelerating And Sometimes At Lower Speeds
My 2007 Hyundai Elantra SE (Automatic, 69,400 miles) makes a grinding noise when I start to accelerate from 40 mph. I sometimes hear a noise that sounds like an airplane wheel being activated when I'm driving at lower speeds driving around town. Could this be the transmission? Who should I take the car to?
View 7 RepliesCamry :: 2003 XLE L4 - Grinding Type Noise When Turn Steering At Low To Intermediate Speeds
I have a 2003 Camry XLE L4, and there is a grinding type noise when I turn the steering wheel at low to intermediate speeds, and when I go over a bump. I can also produce the noise when the car is parked and I bounce the driver's side up and down by placing my hands on the left fender. The struts, steering rack, and CV axels are all new. Also when the car is cold, turning the steering wheel produces a squeak (a different noise) from just behind the steering wheel.
View 11 RepliesYaris/Scion & Vitz :: 2004 Echo - Grinding Noise While Turning At Low Speeds
I have a 2004 Echo with the 5 speed manual. Everything is factory original on this car except the tires. (159,000 km). While turning hard to the right at low speeds or pulling away from a stop and turning right, I get a harsh grinding/scraping noise and it seems to be coming from the drivers front wheel. If it was a CV joint, or wheel bearing, wouldn't it make noise all the time?
View 3 RepliesElantra XD (2001-06) :: Loud Grinding Noise Coming From Front Of Car When Decelerating At Low Speeds
Having problem with my car (2001 Elantra GT) - over the last month or so it's been occasionally making a very loud (not but consistent) grinding noise coming from the front of the car when decelerating at low speeds. The noise sounds like gears slipping over each other but cuts in and out. It's pretty loud and not a nice noise to hear! Sometimes it makes the noise when I brake firmy but not until I reach lower speeds... mostly it's just when coming to a stop, but it did it once last week when I was pulling very slowly out of a parking spot and not even braking.
As it's become more frequent (going form maybe once a week to several times every car journey) I have started to feel something in the brake pedal also, like there's something kicking it from behind. I took it to a mechanic and had to pay a ton of money to get a broken front left ABS ring replaced (it also had the front right ring replaced in May), and within 2 minutes of driving away from the place the noise was back. Before I spend even more money that I don't have on taking it back for extra diagnosis.
I'm told that this is almost certainly the ABS system that has a fault even though the ABS light never shows except when I start the car, and I've taken the fuses out of the ABS in order to confirm that it is. I haven't heard the noise after a few days of driving with ABS unplugged so I think we can be reasonably sure here. Is there anything that I can check myself or test (I'm not very handy when it comes to cars) or can you tell from this information what it's likely to be? Other things that I've noticed with the car which may or may not be relevant are:
- the warning lights for brakes, ABS and TCS are all lit with the fuses for ABS1 and ABS2 taken out. I take it this is normal for all 3 to illuminate with the fuses out?
- since unplugging the ABS I've noticed a slight metallic squeal from the brakes as if the brakes are worn down. Didn't notice this before I unplugged ABS though it may have been there, not sure.
- sometimes when going over a speed bump or just a minor imperfection in the road I hear a clunk in the front of the car and feel something move in the underside of the car. Happens mostly at lower speeds also, but not if I go over the bump really slowly.
- in the fuse box when I took out the ABS fuses I noticed there was a bit of minor melting/brown burn marks on the top of the connections marked (iirc) ECO3 and ECO4 on the diagram (large white connectors). Is this anything to be concerned about?
- sometimes when I have air coming into the car through the air vents it will become significantly warmer for a few minutes, then slowly go back to normal. Can't think of any circumstance that links the times when this happens (eg. speed, weather etc).
- the oil pan has a leak which is on the list of things to fix when the car works properly.