Chevrolet - Suburban :: 2003 - Instrument Cluster Failing
I have a failing 2003 Chevy Suburban instrument cluster and wonder if I can replace it myself. All I have to do is remove it and re-install it when they send it back. 4 bolts and one plug. No reprogramming. What could be easier? Is it really something I can/should do? -
View 3 RepliesChevrolet - Suburban :: Fixing Codes P0327 And P0332 - Failing Battery?
Could these Knock sensor low input codes be caused by a failing battery? My battery was dead 2 days ago. I charged it and it has been starting but today after starting a couple of times in a row these codes came up. I've never had any codes before and it was running fine. It is a 2002 Suburban with the 6.0 engine.
View 11 RepliesFord Exhaust System :: Exhaust Leak - No Gasket Or Donut Ring In The Flange?
I tore it apart and there was no gasket or donut ring in the flange. Is there supposed to be a gasket or donut ring? I can feel the leak with my hand. I have retightened & it still "tick-ticks" real bad.
View 7 RepliesFord Exhaust System :: Exhaust Leak At Manifold Where Donut Gasket Meets The Catalytic Converters
My truck just started running really loud when it's cold and the leak goes away when it warms up to operating temperature.I did a little bit of investigating and I have found where the leak is coming from at the end of the exhaust manifold where the donut gasket meets the catalytic converters. It appears that the bolts rotted that hold the system together at the gasket. What should I do to repair this? I don't really want to replace the whole manifold because I know I'll break a stud off in the engine because everything is pretty rusty down there. I even took some pictures of the problem....
View 3 RepliesFord 7.3L Power Stroke (1999-2003) :: 2000 Turbo Exhaust Housing Gasket
So, I just got my turbo back from my pal Ruben at SoCal Porting (does good work fast and inexpensive) and, I have a question about the exhaust housing with the EBPV.
Is there a gasket that goes between the turbine housing and the adapter that the down pipe mounts to? And, if so, what is the part number for it? If it's steel to steel cool. If not, I'd prefer to put the OEM gasket in there versus permatex or something similar.
Pic of the compressor housing with a little port work....
Ford 6.0L Power Stroke Diesel :: Intake Elbow Gasket / O-Ring Part Number
I need to remove my EGR valve to clean the unit of carbon. While there I will be removing the intake elbow to check if I have the throttle plate installed on my engine. What the part number is for the gasket / o-ring that seals the elbow to the intake manifold??
View 7 RepliesGolf IV R32 :: Exhaust Manifold Gasket Leak?
Have to do a replacement and if so.. is removed the intake the only way to get at those stubs on the ex manifolds.
I thought it was the flex-pipe.. but after listening to the sound and getting an engine code for b1 s1 the leak has to be before the o2 senor for it to pop a code..
It sounds like a standard header leak from backing out bolts or a faulty gasket leak..
Accent LC (2000-05) :: Exhaust Leak In Gasket As Very Bad Mileage?
I've been getting bad gas mileage for the past two years or so. I also get a fume smell when I run the car for a while. I have strong suspicion there might be a leak in one of the exhaust gaskets.
I'll be changing the exhaust manifold gasket and both exhaust flange gaskets. I'll also be changing both O2 sensors. The car runs well and smooth. It's just those two things.
Ford F-150 - 1997-2003 :: Water In Oil And Exhaust - Blown Head Gasket
I just purchased a 2003 F150 Supercrew 4.6 that had been wrecked, but somewhat repaired. I knew the owner said it had a blown head gasket. It has water in the oil (small amount asi it is lightly milky) and water starts dripping from the exhaust after it has run for a few minutes. I did not run it long, but throttled it up to warm the engine. It started dripping soot filled water from the exhaust connections. I bought it to put a 4bt in it anyway, but want to sell the motor with the ability to tell the buyer the skinny on it. I drove it on the trailer and off with no apparent loss of power noticeable.
View 2 RepliesYaris/Scion & Vitz :: Some Dark Residue Coming From Exhaust Manifold Gasket
I have a 2001 echo with 140000kms on it, nothing ever has gone wrong with it. But I now have what sounds like a exhaust leak. I cant find any holes in the pipe anywhere. There is some dark residue that looks like it is coming from the exhaust manifold gasket. I replaced this but the sound continues. Do i need to get the manifold completely out of there and plane the mating surface of the manifold smooth. It looks really pitted right now?
View 7 RepliesFord F-150 - 1997-2003 :: Exhaust Manifold Gasket Cracked - Ticking Sound?
If the exhaust manifold gasket is broke / cracked will it making a ticking sound?
View 5 RepliesOldsmobile - Alero :: 2001 - Exhaust Intermittently Throwing Off White Smoke - Cracked Head Gasket?
2001 Oldsmobile Alero, 4cyl, purchased in March with around 150k miles.About a month and a half ago I topped off the coolant. 2-3 weeks ago I noticed the exhaust was intermittently throwing off white smoke. Not thick, opaque plumes or anything, but more like how your exhaust might look on a cold day. Being May though, I knew the temperature was not responsible.
This white smoke would occur intermittently and usually stop after driving for a a little bit. Since the white smoke was not constant and the coolant levels seemed to be okay I figured maybe it was something with the EVAP system or the fuel mixture. On a hunch and as a matter of maintenance I put in new Oxygen sensors a few days ago. The next day my coolant light went off again. Since then I've put radiator stop-leak in the coolant and some STP "gasket rejuvenator" in the oil.
My theory: if the head gasket is indeed cracked, it's a very small crack--small enough so that after the engine warms up a bit the gasket expands essentially sealing the crack. This would explain the intermittent nature of the white smoke and and slowness of coolant leak. Are there any other tell-tale signs I should look for with a bad gasket, if this indeed that case? I saw in the store some stuff similar to stop-leak specifically designed for sealing head gaskets that involved draining the radiator, dumping this stuff in and running the engine for a bit, draining it out, and letting the car sit for a day before putting new coolant in. If the head gasket is the issue would the combination of stop leak.
Suburban :: 97 K2500 Suburban Shaking When Braking Above 30mph
I have a K2500 suburban that has a rather aggressive/violent "vertical" shake when braking above 30mph... I bought it about 6 months ago and was told it just had a full brake job all around(receipts provided). The shake has been off and on, mostly reserved to highway speeds, however recently it has been constant at any speed above 30mph... Thinking it may be the rotors. I pulled the wheels off and even though everything looked brand new (as described) I replaced the rotors and put on new pads... did not fix the shake... and I had the old rotors mic'd and they came back good as new with zero need to turn/resurface.
I was told it may be the ABS, So I pulled the fuse... and it didn't fix the issue also I have no light on the dash
I was told it may be a flat spot on the rear drums, so I replaced the rear drums and it didn't fix the problem... the shoes looked brand new and had just as much pad left as the set i was replacing them with, so I left them alone.
I had happened to have new tires put on it, and they advised my pitman arm and idler arm were shot and that they couldn't do an alignment, so I replaced the pitman and idler and brought it back to be aligned which they did... this did not resolve any issues...
I spoke with the previous owner and he said he had the same issues and couldnt figure it.. he said his mechanic replaced the wheel bearings, rotors, pads, calipers, brake lines, ball joints(all receipts provided, and all these parts look brand new)...
The shake is very aggressive it makes the dash jump up and down and vibrates the hood to the point where it looks like it will rattle off.. the pedal doesn't pulse and the steering wheel aside from vibrating up and down doesn't pull or shake one way or the other... truck doesn't pull when braking or during this shake... and the second you let off the brake the shaking stops... and only ever shakes when you hit the brakes...it rides as smooth as can be when not braking...
Ford Super Duty (1999-2016) :: 2011 F250 - CEL On - CAT Converter Failing At 39k Miles?
Recently my 2011 f250 sd 6.2s check engine light came on so I took it to my local dealer it was throwing a p0430 code, they said bank 2 cat converter wasn't do it's job so it needed to be replaced. I am concerned that there is an underlying cause of the premature cat fail. I pushed the issue with the service manager and he told me that's all they could do was replace the cat and refused to check anything else on the truck. Is this common? The truck runs and drives fine. I'm just concerned that they are just throwing parts at it to get it out the door.
View 5 RepliesFord Super Duty (1999-2016) :: 2009 F250 - Coil Packs Slowly Failing
I have a 2009 f 250 5.4 v8 trition motor my coil packs are slowly failing. I want to replace all 8 of them. Which coils and plugs I am going to need. I guess I'll replace the plugs also, how are the accel coil packs and ngk plugs....
View 1 RepliesGti - Volkswagen - Valves :: 1999 - Emissions Part Location?
Exactly where to look to locate my evaporative purge control valve on my 1999 VW GTI AEG 2.0 non turbo engine?
View 11 RepliesSuburban :: 1999 GMC Just Quit When Going Down Freeway
I have a 1999 GMC with 280,000 miles. No engine light on. I was going down the freeway and the engine light flashed 5 times and the engine quit. Left 4 ways on and the battery went dead. Towed home. Checked code and it was p0304. Because the battery was dead for a few days I don't know if it's from back then or just now with me trying to start it. The fuel presser is good and it holds presser. The engine try's to start I think. It stumbles and simi locks like it's trying to fire but not enough to keep it turning. fuse's look good, the ones I know of.
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: PCM Ground Clip Part Number?
Does that little clip that grounds the PCM case have a part number? I've been troubleshooting an "SES - but no codes that would cause it" issue, and noticed tonight that clip is not there. Even a photo would work, as I assume I could make one if I had to. It's just a piece of copper, right?
View 4 RepliesSuburban :: 1999 - Oil Tank In Radiator Leaking?
I have a 1999 suburban I got about 8 months ago when i got it it had a miss #6 plug porcelain was gone around electroid, mis fire returned to #6 agin about 2 months ago changed #6 it was gone this time porcelain was just cracked, now I just noticed oil in coolant I drained oil n didn't see any water in it.. Oil tank in radiator leaking? What else could cause this? By the way it hasnt over heated.. temp does fluctuate between 160-210 . What made me notice it was cap was leaking coolant changed cap gonna look at it tomorrow again.
View 10 Replies