Sonata I45 (YF - 2011+) :: How To Make DRL And HIGH-BEAMS Brighter
So I just put in 6000k hid's in my 2011 Sonata Turbo and I want to make my DRL's brighter as well as my high-beams brighter. Is this possible? Also, I'd like to make my fog lights match my HID's, but don't know if I should put HID's in there or LED's.
View 18 RepliesSonata I45 (YF - 2011+) :: Interior Dome LED Remain Lit
I replaced the standard bulbs with LEDs and noticed that even when they should be off, they remain lit ever so slightly. So I put back the old ones. This can't be common.
View 22 RepliesCamry :: Normal Lights Are Dim / Auto On Position Results In No Lights / High Beams Ok
2008 Camry Hybrid. Normal lights are dim. Auto on position results in no lights. A turn brings the lights on, but appears to be a "parking" position. High beams OK
The dealership has no clue - they wanted to sell new bulbs. They are barely bright enough to drive at night, certainly not 10% dimmer from age as they described.. (plus the auto on does not work ).
Tiguan :: 2011 - Cannot Get High Beams To Stay On?
I just bought a 2011 Tiguan S. Loving it so far, but I can't seem to get the high beams to stay on? I'll pull on the lever and it'll go on but then will snap back. I thought it was strange since none of the cars in our family does this. I tried turning it on with the headlights turned on as well and it wouldn't work.
View 3 RepliesSonata NF (2006-10) :: No High Beams Working
I replaced the high beam headlight bulbs in my 09 Sonata, resulting in no high beams working at all. Took out the new and put the old ones back in. Still not working. Checked all the fuses, and the relays. No problems there.
View 3 RepliesSonata NF (2006-10) :: How To Adjust High Beams
For some reason, the search button isn't working. Anyhow though, I am wondering if there is a way to adjust the high beams on the Sonata? I know how to adjust the low beams but am at a loss regarding the high beams---the owner's manual only tells about how to adjust the low beams.
View 7 RepliesSonata NF (2006-10) :: How To Switch From Low To High Beams
Just purchased a 2009 Sonata and the dealer did not give me an owners manual. In a recent phone call he promised to be mailing one so with that said I've looked on countless forums about this tedious issue I am having. I can't seem to figure out how to turn my high beams on. All other lights are working correctly and from a diagram i read online its like any standard high beam, just pull the lever forward. I've tried every which way but can't even get the light on dash to turn on telling me the high beams are even available. I clearly see them in the front of my car. And driving at night they would make a big difference on those back roads.
View 4 RepliesSonata I45 (YF - 2011+) :: Can Low Beams Be Tilted Up Or Down A Little?
I know some cars have an automatic feature that allows the low beams to tilt up or down by a very small amount. I don't think our car has this option, but is there a manual way to do this?
View 20 RepliesGolf/GTI VII :: Fog Lights On With High Beams?
Didn't find anything on this, but I've noticed that on my GTI the Fog Lights stay on when the High Beams are turned on. Which I find unusual since no other car I've ever owned did this (Including my '12 TDI), and as far as I understood, in the US (At least here in NY), it was actually illegal to have them both on at the same time. ?
View 12 RepliesSonata I45 (YF - 2011+) :: HID Low Beams Keep Blowing Fuses
So I installed my XS HID low beams and fogs a couple of weeks ago, and everything was working fantastic. However, when I installed my LED turns and load resistors, whenever I turn on the low beams, the inline 30A fuse pops. The HID fogs continue to work. The switchback turns work great, and I have never got any hyperflashing.
I have checked all the connections, and they all seem strong. I have used the diagram I found on here from exLEDshop outlining all the connections on the pin array for the headlight harness. I am tapped into the blue wire on the driver's side for + turn and the black for -, and the black w/orange stripe on the passenger side for + turn, and the black for -. If I accidentally have the load resistors connected to the wrong wire, would the turns hyperflash?
I know that it would be better if I used grounding points on the chassis for the load resistors, but could this be causing the short? Or could bad ballasts that are the culprit? The only reason I'm leaning away from it being the ballasts is because they worked fine until I put the load resistors in.
Camry :: 2007 - All Lights Are Working Except High Beams
I've ran into an issue with my high beams on my 07 Camry SE. All lights are working except high beams. When you switch to high beams the lows only stay on. The dash light comes on and shows high beam indicator, but no brights! Fuses look good, and so do both bulbs. Going to go buy a bulb later today just to try. Like I noted they both just suddenly stopped. I'm leaning towards dimmer switch on column now.
View 11 RepliesCamry :: Fog Lights Turns Off When High Beams Activated
Yesterday, I went through my car doing a complete LED conversion. I got everything done. And then I replaced my high beams with Silverstar Ultras. I didn't touch my fog lights or my low beams (these will come next.) And then I went and got some wings with the boys, showing off my new LEDs and my bright high beams. We noticed that my fog lights turn off when my high beams were activated. A cool point I never knew about, but, it is extremely relevant in this story.
This morning I went to work, and noticed that my fog lights were not working. So after work, I came home and tried everything to get them working, check fuse in car, and tried every combination of light to activate them. Then I checked the fuse box under the hood, I hadn't actually ever looked in there before. When I did, I noted that the 10amp fuse, Fog R/R was missing... MISSING. I took the spare from the cover and put it in, and bam, fog lights work again.
Santa Fe (CM - 2007-12) :: High Beams / Lights On When Unlocking?
Like on most Chevrolet's or other cars, when you unlock your car with the remote, your headlights come on for awhile. I've tried to 'unlock' this feature with a scanner but the only option I was able to change was the auto lock door function. Is there any way to activate this feature (if possible)? If its not possible with a scanner. I have a '09 Santa Fe Limited, w/ Auto Lights w/o DRL.
View 10 RepliesFord Ranger / B-Series :: 2011 - High Beams Not Working Even Replaced Fuse
I have a 2011 ford ranger XL and I get no high beams. My low beams work fine but when I try to either activate the high beams or pull for the flash to pass they do not illuminate and the indicator on the dash doesn't come up either. I have replaced the fuse with a fresh one, even though it didn't need to be replaced, and also replaced the headlights as well cause one was burnt out.
View 1 RepliesCamry :: 2010 - Changing High Beams And Adding Fog Lights?
I recently noticed that the high beams on my car are actually pretty dim (38k miles with them.) I've looked online and it seems fairly easy to change out the bulb but I wanted to know if there any specific bulb brand recommended and also I wanted to know how to add fog lights since I live in a part of the country where it snow alot and its foggy in the summer.
View 14 RepliesLexus RX 2004-09 :: How To Modify Fog Lights To Stay On With High Beams
What steps are needed to modify a 2005 RX 330's fog lights to stay on with the high beams? I found the info on the web & did this modification to my 2010 Tundra but can not find any info pertaining to how to mod an RX.
View 2 RepliesFord F-150 (2004-2008) :: Way To Run Fog Lights And High Beams Simultaneously?
Any way to run fogs and high beams same time?
View 9 RepliesSonata I45 (YF - 2011+) :: Driver Side Headlight Went Out - Low Beams Aren't Working
So about a 2 weeks ago my drivers side headlight went out. I figured it was the bulb (even though I had just replaced them about a month prior). Got new bulbs and nothing. I checked the fuse and it was not blown. I made sure the electrical connections to the bulb weren't dirty and were connected properly.
Then last night my passenger low beam went out. I had changed the bulb when the other side went out 2 weeks ago. Its still brand new and not blown. I did the same thing, the fuse is not blown and the electrical connectors are clean and secure.
I just took my car into the dealer about a week before the driver's light went out and did their "Major Service". They did tell me that I would need to replace my battery soon. Could this be the cause?
I drive a 2011 Hyundai Sonata SE 2.4L
Chevrolet - Silverado :: 1983 - Dash Cluster Lights Go Off When High Beams Are Turned Off
Vehicle: 1983 chevy c10
Here's the problem, when the high beams are on the dash cluster lights work fine,but when I turn the high beams off the dash cluster lights go off.Im going to buy a new high beam switch but what else might cause this problem?The truck has one of those metal button high beam switches that is mounted on the floor.