Camry :: Normal Lights Are Dim / Auto On Position Results In No Lights / High Beams Ok
2008 Camry Hybrid. Normal lights are dim. Auto on position results in no lights. A turn brings the lights on, but appears to be a "parking" position. High beams OK
The dealership has no clue - they wanted to sell new bulbs. They are barely bright enough to drive at night, certainly not 10% dimmer from age as they described.. (plus the auto on does not work ).
Camry :: Fog Lights Turns Off When High Beams Activated
Yesterday, I went through my car doing a complete LED conversion. I got everything done. And then I replaced my high beams with Silverstar Ultras. I didn't touch my fog lights or my low beams (these will come next.) And then I went and got some wings with the boys, showing off my new LEDs and my bright high beams. We noticed that my fog lights turn off when my high beams were activated. A cool point I never knew about, but, it is extremely relevant in this story.
This morning I went to work, and noticed that my fog lights were not working. So after work, I came home and tried everything to get them working, check fuse in car, and tried every combination of light to activate them. Then I checked the fuse box under the hood, I hadn't actually ever looked in there before. When I did, I noted that the 10amp fuse, Fog R/R was missing... MISSING. I took the spare from the cover and put it in, and bam, fog lights work again.
Santa Fe (CM - 2007-12) :: High Beams / Lights On When Unlocking?
Like on most Chevrolet's or other cars, when you unlock your car with the remote, your headlights come on for awhile. I've tried to 'unlock' this feature with a scanner but the only option I was able to change was the auto lock door function. Is there any way to activate this feature (if possible)? If its not possible with a scanner. I have a '09 Santa Fe Limited, w/ Auto Lights w/o DRL.
View 10 RepliesCamry :: 2010 - Changing High Beams And Adding Fog Lights?
I recently noticed that the high beams on my car are actually pretty dim (38k miles with them.) I've looked online and it seems fairly easy to change out the bulb but I wanted to know if there any specific bulb brand recommended and also I wanted to know how to add fog lights since I live in a part of the country where it snow alot and its foggy in the summer.
View 14 RepliesPassat (B6) :: 2007 - Bi-xenon High Beams Aren't Working On One Side?
I have an 07 with the AFS lighting. bulb error on dash- as I understand it, this has to do with a faulty shield for the high beam on the passenger side. Can this be repaired? Or should I just shell out the 300 for a used one on ebay.
View 3 RepliesCamry :: 2002 High Beams And Turn Signals Work But Headlights Not Working
I bought a used 2002 Camry (at a discounted price because of a few dings and dents) and the headlights are not working. The high beams and turn signals work but not the headlights. I changed the bulbs, checked all the fuses and got a new relay but still nothing. I brought it to an electro-mechanic and he told me the ECM was busted and that he could maybe grind it down. This seemed odd to me so I called my old mechanic in the states who said he has never heard of an ECM causing headlights not to work and suggested I install a toggle switch. Does this sound like it could work? Could I do this on my own? I'm pretty handy but am a little hesitant to try any electrical work on my car as I have no experience with electrical work.
View 3 RepliesCamry :: 2007 - High Beams Stay On All The Time Even When Car Turned Off
I love this car- i just bought it , but it has one problem i cant figure out .The high beams didn't work at all -till my mechanic figured the prior owner took out the two fuses - now they stay on all the time - even when the car is turned off . My guess is the light switch - my mechanic said it is probably more than that...
View 3 RepliesFord Super Duty (1999-2016) :: 2001 F250 - No High Beams And Dash Lights Not Working
I have an 2001 F250 SD with 7.3 Diesel. Headlight switch failed and I replaced it. But now I have no high beams and my dash lights that light the dash up don't work. Gauges, fog light, low beams all work fine. Fuses checked. Multi function switch checked. What to do next?
View 1 RepliesPassat (B6) :: High Beams Are Not Working
I have a b6 Passat and the high beams are not working. I am going to be installing HIDS in the next week or so so I located a vag com disabled the drls and enabled Xenon without the shutter. now no high beams. they will only work with the car off and pull back the switch instead of pushing it forward.. I'm sure there are ppl on here with HIDs and there high beams working on a b6.
View 9 RepliesGolf/GTI VII :: Fog Lights On With High Beams?
Didn't find anything on this, but I've noticed that on my GTI the Fog Lights stay on when the High Beams are turned on. Which I find unusual since no other car I've ever owned did this (Including my '12 TDI), and as far as I understood, in the US (At least here in NY), it was actually illegal to have them both on at the same time. ?
View 12 RepliesPrius (Gen 2) :: 2005 - High Beams Not Working
I'm a new owner of an 05 Toyota Prius. Im loving the car so far, however, i am having an issue with my high beams not working. After doing lots of research it looks like the high beams on the Prius comes from the same bulb, what controls the high beams is the reflector.
My low beams and all other lights are working fine. After removing my bumper and looking through all the wiring I have noticed that their are two plugs that are not attached to anything. The lights look brand new, so my thoughts are that this car had HID lights and they were then replaced to non-HID lights.
How to get the high beams working. I don't see any HID ballast anywhere, so converting it back to HID would be costly since i would need new headlight plus ballast and bulbs.
I tried looking for wiring diagrams but can seem to find any.
Here is the link to some images: Prius Photos by Izzy25323 | Photobucket
Sonata NF (2006-10) :: No High Beams Working
I replaced the high beam headlight bulbs in my 09 Sonata, resulting in no high beams working at all. Took out the new and put the old ones back in. Still not working. Checked all the fuses, and the relays. No problems there.
View 3 RepliesMalibu :: 2004 Only High Beams Working After A Replacement
Driver side low beam was burnt out. I replaced the bulb with a new one then no low beams would work, high beams work. Turning on manual switch and I checked fuse 7 & 10 fuses which were okay still no lights.
Could it be the low beam relay? The passenger side was working. Do they only come on when it is dark enough as I can't remember if they are running lights and worked in daylight?
GTI 337/20th Anniversary :: Low / High Beams And Blower Fan Not Working?
So I pullled into a reststop to relieve myself and when I drove off none of my lamps (high,low,or fog) worked. Along with them my blower fan does not work nor the rear defoggers, wipers, spray with wipers, turn signal (hazards do work though). Is there a fuse or relay that connects them together?
View 2 RepliesFord Excursion :: 2000 - High Beams Not Working
Low beams work fine. When I push the Multi-Function lever on the column forward to activate the high beams, I have no lights at all. When it is in low beam (middle) position, low beams work fine. When I pull back for click to pass, only the low beams are active. No high beam indicator in instrument cluster. I have:
1. Replaced both headlight bulbs
2. Replaced the multi-function switch on the column. Checked test pins on switch (MF) they are hot when in either high beam position or click to pass position
3. checked fuses (interior)
#8 - power on both sides of fuse
#16 (15a) High beam headlamps, instrument cluster. ***NO POWER ON EITHER SIDE***
4. checked fuses (engine compartment)
#10 - power on both sides
#21 - Power on both sides
#23 - power on both sides of fuse
Sonata I45 (YF - 2011+) :: Fog Lights To Remain On With High Beams
Any mod that will allow the fog lights to remain on when the high beams get turned on?
View 40 RepliesCavalier :: 2003 - High Beams Not Working / Bulbs Are Good
My High beams for a 2003 cavalier are not working. I checked the bulbs and they are good, The Low Beams Work and my drls work. I switch from low to high and the blue indicator on the cluster panel comes on.
View 5 RepliesCamry :: 2006 - Key Fob, High Beam, Interior Lights Stopped Working
I have an '06 Camry, which has lost all power functionality. The follow items just stopped working
1. Key fob -- keyless entry and alarm stopped working
2. high beam doesn't come on when headlight is on. However, when headlight is off, it comes on--go figure
3. Power door lock also does not work, even from driver side door. Have to lock all doors manually
4. Interior lights don't come on when door is open.
Camry :: 2007 - DRL And High Beam Aren't Working
Where's the fuse for the DRL ...both my DRL and high beam isn't working ...I checked the bulb and is seem fine. I did check the fuse box on both locations ( under the hood and steering wheel) none of them says DRL fuse in there ...
View 14 Replies