Engines - Honda - Accord - Starters :: 2007 - No Proper Start Up / Bad Ignition Switch Or Battery?
My 3.0 L Honda Accord won't start the way it should. I've included a video of the situation. I need to figure out what I need to replace. [URL] ....
View 4 RepliesFord - Expedition :: Intermittent Ignition / Takes Several-to-many Attempts In Order To Start
My husband's 2000 Ford Expedition has 94K miles and has been very well maintained. For the past few months, it's been having intermittent ignition problems. It'll start up fine for a few days, and then suddenly will need several-to-many attempts in order to start. Engine cranks every time, but won't catch. A few times it has taken over 10 min to get it started, and on occasion we've had to take our other vehicle instead. My son and I spent 15 creepy minutes in a dark parking lot the other night trying to get the truck to start.
It's in the Ford repair shop for the third time in a month now (last time was for 4 days), and the shop has been unable to replicate the problem enough to diagnose it. (The two times when it wouldn't start for them was when they DIDN'T have it hooked up to fuel-system test equipment.) I'm getting the sense they just want us to go away quietly and buy a new vehicle, but this one is the type we like...paid for! The problem occurs at various times of day...in various types of weather...when truck is hot, cold, or in between...gas tank at different levels...we can't find a common denominator, and all other diagnostics come back fine. The only slightly creepy suggestion the shop had was that maybe someone poured sugar in the gas tank..
Santa FE SM (2001-06) :: After Driving It Won't Shut Off - Replace The Ignition Cylinder Or Switch?
I've been having a "turn off" problem with my 03 santa fe. After driving it doesn't want to shut off. The switch will be in the off position and it just keeps running. When I put it in Reverse or drive and then turn the switch off it stops. But which should I look at first? The ignition cylinder/key replacement or maybe something in the ignition switch/electrical? The cylinder assembly is over a hundred $$ and the switch is only $25.
View 3 RepliesSanta FE SM (2001-06) :: 2004 - Timing Belt Broke And Turning On Ignition Switch Blows CPU Fuse
Son has a 2004 Hyundai Santa Fe 2.7 motor. The timing belt broke before we could replace it. Long story short, 24 valves, gaskets, timing belt, water pump, new belt tensioner and new pulleys. The motor is back together. The only problem is when you turn the ignition switch on, it blows the CPU fuse. The only electrical part we replaced was the purge valve.
View 3 Replies93 Ford Escort - Ignition Switch Won't Start Car
I've got a problem with my 93 ford escort. About a month ago things in it began to stop working. 1st the wipers and then the heater. and now the ignition won't start my car. It will allow it to turn over but it doesn't turn on the engine light before it starts to kick in. Bad key assembly or the whole switch? Or a relay ?
View 2 RepliesPassat (B5) :: Won't Start And No Crank - Ignition Switch?
well for a few days the car woudln't start every 10 times or so , i'd turn it back and forth a few times and it would kick over , then tonight wife took it and it just wouldn't start so i went and picked her up and tried it about a 100 times and called a tow truck
so what does everyone think it is, everything else is normal but the no crank. ignition switch maybe? I'm going to try and pop the clutch after it gets here, i didn't have the room or distance to try it where it was
Santa Fe (CM - 2007-12) :: 2010 - Remote Start Key Fob Not Responding
Recently my 2010 Santa Fe's remote start key fob is not acknowledging a response for any function on it and there is no blue light activating behind rear view mirror. I figure it has to be something fairly simple since it worked just fine last week. I have two remotes and when buttons are pushed I'm getting bright blue lights on both key fobs so I doubt if both batteries are bad, the factory key fob for door locks still works fine. I've read other posts and I'm aware that there is not many fans of the remote start feature. Its been -30 here in MB for far too long and I need this feature to work for me.
View 2 RepliesPassat (B5) :: 2003 V6 GLS Would Not Start Without Jiggling Ignition Switch Around
This problem has been with the car since I bought it in 2004 and lived up north in Yellowknife, NT. Whenever the outside temp got down to minus 20 or so the car would not start. Turn the ignition switch on and all the idiot lights are on, turn the key to engage the starter and nothing. I found out by trial and error that if I let the key turn back to the ignition setting ever so slowly it will come to a point where the starter engages. It takes some trial and error but usually that works. However, if it got to minus 30 even that would not work. I would then have to place an electric heater in the driver's foot well for half an hour or so and then the car would start perfect.
Now I've moved south where it does not get that cold however now the problem is happening even at zero degrees. Yesterday was minus 1 or 2 and car would not start without jiggling the ignition switch around. Today plus 11 and starts as it should. To me it sounds like a mechanical problem with the ignition switch however I don't know.
2003 V6 GLS 4-motion....
Nissan - Maxima :: 1998 - Won't Start When Hot Outside - Ignition Switch?
The car is a 1998 Nissan Maxima. As you well know a car's interior in the summer is about 10 to 15 degrees more than the outside. When the outside temperature is 80 degrees or more I can't readily start the car. I turn the key and nothing happens. Sometimes I put the switch into the "on" position wait about 20 to 30 seconds, turn the key again and the engine starts. I think I need an ignition switch. My question is why does this happen? What does the temperature of the car's interior have to do with the poor operation of the switch? The interior of the car must be about 75 degrees or less for the car to start.
View 4 RepliesGolf IV / Jetta IV :: 2001 - Won't Start - Ignition Switch?
Just got this car it's 2001 gti turbo. The guy said that the key fob was back. But I changed the starter and still no luck. It had all new plugs and I went to check for spark and there was no spark or fuel. So then I got a new crankshaft sensor and still no luck. I haven't gotten the chance to check for spark yet. And now those lights and beeping keep happening even without the key In the ignition. Can it be the ignition switch or something worse?
View 1 RepliesSanta Fe (CM - 2007-12) :: 2010 - Random Clicks Before Engine Would Start Normally
2010 Santa Fe V6...about a week ago the starter started acting up. When you try to start the car, you would hear 3 clicks before the engine would start normally. The clicking is random and does not happen every time. The dealer could not find anything wrong other than the battery was reading 440CCA vs the 600CCA it was rated. Starter clicked first thing today on the way to local mechanic to get brakes replaced. They tested battery and it tested good. What could be the problem?
View 4 RepliesImpala - Chevrolet :: 2006 - Intermittent No Start / Bad Ignition Switch
I have a 2006 chevy impala LT 3.9 v6. Intermittently it wont start, crank it and it does nothing. All accessories work fine. Had a new starter installed, switched the relay it works on, had the ignition switch changed (twice), had the passlock system replaced, new keys for the ignition. Had the car to the dealer four, times. It doesn't happen all the time so it cant be reproduced at will. I just keep trying to start it and it will eventually start, it can be turning the key from 4 to 40 times. there's no rhyme or reason, some times it doesn't happen for 5 days, then it happens everyday for a week.. according to the dealer when they reproduced it it was the ignition switch. I doubt i got 2 bad ignition switches so i don't believe the error is being reported correctly. According to chevy they have no other reports of this..
View 2 RepliesCamry :: 2007 - Car Takes Up To 4 Attempts To Start Normally
My wife's 2007 4-cylinder Camry has 174,000 miles and has been a great car. Recently however the car has become harder to start. The engine cranks fine but it either starts right up or it will just crank. I've learned that if it doesn't start normally, I stop cranking and try to start again. Sometimes it takes up to 4 attempts then it starts normally. It seems like it either gets the fuel and starts correctly or it's not getting fuel and cannot start.
View 14 RepliesSanta Fe (CM - 2007-12) :: 2010 V6 Can't Start / Clicking Noise With Dimming Lights
Our 2010 Santa Fe SE V6 just developed a problem where when we turned the key, the car wouldn't start, and there was a loud clicking sound during start attempt. Battery tested 100% OK.
This often points to a starter problem, but a telling symptom was than the headlights would dim, almost going out, along with the dash lights and most any other lamp. If it was just the starter, unless dead short, this associated dimming would not happen. I also put a volt meter on the battery and watched battery voltage during cranking attempt, and the voltage showed minimal drop, so once again the battery was not the problem.
Traced the problem to the ground strap from the battery which terminates to the driver side front wheel well. Two bolts hold the strap to the wheel well, and they are oxide coated and the contact point on the wheel well is painted. This means all the current returning to the battery is essentially passing through the bolt threads and cap where the oxide has been scratched enough to be conductive.
I sanded underside of the bolt heads to remove oxide, sanded the ground strap itself which seemed to have some sort of clear coating, and sanded the paint away from the wheel well where the strap makes contact. I didn't have star washers, but if I did they would have been a good addition.
Car now starts with no problem.
I am concerned with the possibility of corrosion under the strap where I sanded away the paint, but will monitor this. I think the contact between the strap and fender wall is tight enough with the two screws to seal out moisture and oxygen.
I am also going to locate and check any other chassis to engine ground straps so I don't have any new problems in the future.
Lexus RX 2004-09 :: Ignition Switch Stuck / Occasionally Key Would Not Turn To Start
'04 RX330: Starting about a year ago, occasionally when inserting the ignition key it wouldn't turn to start. Take key out try again and it would start. Progressively, it seems to be requiring more and more in/out cycles to get the key to turn. It's like the transponder is not recognizing the key FOB. I have two keys, one is a master and other is a sub key, both have the problem. What has to be done to correct it? I'm afraid the dealer will just change some expensive ignition part when there's an easier fix.
View 14 RepliesCamry :: 2007 XLE - AC Takes Longer To Start Blowing Cold Air
My car had some minor front end damage repaired by a body shop. Since I got it back the a/c takes longer to start blowing cold air. If I drive it daily the a/c starts up normally. But if the car sits for a few days, it may take anywhere from 3-5 minutes before it blows cold. I've taken it back to the body shop who has in turn taken it to a dealer and nothing was found.
View 2 RepliesFord F-150 (2004-2008) :: Truck Won't Start - No Click Sound When Turn The Key In Ignition Switch?
I'm trying to get friend's 04 F150 4x4 started. I think it might be the ignition switch. Here's what I've done. Turn the Key and nothing happens. Not even a clicking sound from the battery.
-verified the battery had a good charge and that terminals were clean, connections were tight.
-checked the fuses in the passenger side kick panel, none were blown
-Determined there was power to the primary Pos wire going to the starter , but no power being sent to the smaller wire that goes to solenoid at the starter.
-Hooked a jumper wire to the starter solenoid and engine did crank (so starter is good and battery is making good connection)
This is why I'm thinking its the ignition switch.
1) Where is the ignition switch located?
2)How can I test the ignition switch?
3)Could it be the "cylinder lock and keys" that is faulty?
Santa Fe (CM - 2007-12) :: Key Would Not Turn In Ignition
I am currently driving a 2012 Santa Fe Sport (Canadian). Over the weekend I encountered a problem with the ignition - the key would not turn. It happened once in the morning but it turned after I jiggled it a few times. It happened again in the afternoon but this time it would not turn at all. I had to call roadside assistance. They had me try a few things (pumping the breaks, shaking the steering wheel) but I couldn't get it to turn. They had to send a tow truck. When he arrive he fiddled with it for 30 seconds and got it to work but could not really explain why - only suggested that I take it to the dealership to have it looked at.
The vehicle is only a few months old (5200km).
Ford Super Duty (1999-2016) :: 2001 - Won't Start But Radio On Even With Key Out - Ignition Switch / Actuator?
I have a 2001 f350 this morning I went to start the truck the key turn but I heard a click sound all the lights and everything came on but the truck won't start just silence I could turn the key back in the off position and put the key out but the truck is still on radios on it's like the truck is still in the run position or on position there is a lot of play between off and run but like I said the truck will not start, could be not sure if it's the ignition switch or actuator rod..
View 2 Replies