Santa Fe (CM - 2007-12) :: Shifter / Gear Select Hard To Move
Got in to go to work this am, and the gear shifter was difficult to move. What to check?
I drove 70 miles to work and didn't seem like any issues with the transmission shifting.
Got in to go to lunch and it seems even more difficult to move...
Shifting back and forth in the selector seems to loosen things up a little.
A friend move the selector while I looked at the linkage and the bracket that support the cable is flexing while shifting between gears....More likely a transmission issue or something with the linkage?
Taurus :: 2007 Ford - Console Shifter Hard To Move From Reverse To Park
My cousin has a 2007 Ford Taurus with the pushrod 3.0L. It has the console shifter and it is hard to move the shift lever into Park from Reverse. The shifer moves out of park and to every other gear with normal effort. The gear indicator correctly displays the shifter position. It drives/shifts perfectly fine. The only problem is that it is hard to move the shifter from Reverse into Park. It feels like there is a rubbery, or somewhat mushy threshold/resistance that needs to be overcome with a moderate amount of effort to get the shifter into park. Once the shifter is in Park it feels normal meaning you don't have to hold or force the shifter to stay in park.
It is frustrating because it seems most other people have a problem with the shfiter being hard to move from Park to Reverse or Neutral, but she is having the opposite issue. Will it hurt the car to keep shoving the shifter into park when necessary without getting it fixed?
Camry :: 2002 - Shifter Physically In Gear But Cluster Indicator Showing Park And Won't Move
So my friends 2002 camry has a problem where she shifts the shifter into drive, but the gear position indicator in the cluster still shows her in park, and the car will still be in park with parking pawl engaged. is this a sensor that went out, or a deeper transmission problem to be dealt with?
View 1 RepliesFord Ranger / B-Series :: 2001 - Copper Cable Doesn't Move When The Shifter Does
After taking apart my instrument panel to change the bulbs, I went to reconnect everything, but now the gear shift indicator isn't working. I can change gears fine, and everything else on the instrument panel works just fine.
The copper cable that connects to the shifter doesn't move when the shifter does. Is there a way to fix this problem, or do I need to find a replacement cable?
Ford Escape / Hybrid :: 2001 - Cannot Move Shifter Out Of Park / Safety Interlock
While traveling I made a fuel stop. Restarted engine fine, stepped on brake, but could not move the shifter out of Park. Towed to Ford dealer, after extensive trouble shooting replaced shifter cable and transmission position sensor. A week later same problem but glad I learned about the interlock override lever on the steering column so can continue to drive. It locks up several time a day. Here's what I know and observe.
. brake light switch appears to be normal
. engine starts normally
. brake lights operate normally
. fuse on interlock function is ok
. when the lockup happens the shift indicator is missing the box over the P
. this may not relate but backup/reverse lights operate very weird - in reverse they only light when the engine in rev'd and go out when the gas pedal is released
There appears to be a gremlin in this Escape that eludes Ford and me. I read some reference to a computer control involved in the interlock function. I'm at a loss.
Santa Fe (CM - 2007-12) :: Gear Shifter Very Difficult To Move When Put Car In Reverse
Here is what I have:
2009 Santa Fe 3.3L AWD
70k KMs / 43k Miles
Temp has been very cold, -20C / -4 F
Car starts up without any problems. Try to put car in Reverse and the shifter is very hard to move, if it moves at all. When I am able to get it into Reverse, I then try to put it in Drive and it does not "engage" the "D" and the car behaves like its in Neutral. Moving the shifter back to Park, Neutral, Drive is very difficult and sometimes it will not go into Park. The dash lights do not illuminate the selected P, R, N, D.
However, once the car is warmed up (no longer on C on the temperature gauge) I can with a little effort move the shifter freely (but more effort than it should take) and the car behaves normally. Gear shifts are smooth and in general it is operating normally.
The dash lights do illuminate the selected P, R, N, D. I've checked the Trans fluid level and it appears to be normal and was planning to change it this w-e but I'm no longer sure it will work. Even if it has never been changed.
Also note that I have recently changed a wheel/hub bearing due to a noise that sounds a lot like loud tires on a highway. The bearing change did not eliminate the noise and I assumed that I've changed the wrong one. The noise does not appear to be coming from the Trans, but I cant be 100% sure. The noise is speed related and occurs only after about 20KM/h 16MPH. Unsure if they are related..
Elantra XD (2001-06) :: Shifter Doesn't Stop At D When Shifting Out Of Park
I recently purchased a 2005 Elantra Automatic, my question is, when shifting it out of park, the shifter doesn't stop at "D" but at "3" is there an adjustment or is it just a quirk of the car?
View 2 RepliesSanta Fe (CM - 2007-12) :: 2011 - Gear Stick Won't Move From Park
I have a Santa Fe Style CRDI Auto from 2011 which is not covered by Warranty and has only done 6000 miles.
The problem is that the Gear Stick Won't Move from the 'Park' position (with the engine on and brake fully pressed down).
There have been issues over the last couple of weeks where it was difficult to move the gear stick at times but it was fine after waiting a few seconds. Now it seems completely stuck.
Santa FE SM (2001-06) :: Shifter Pops Out Of 5th Gear
The shifter will not usually stay in 5th gear for very long. The clutch and flywheel were replaced a few weeks ago just before i purchased the car but this problem has only cropped up in the last week. Could it be shifter linkage adjustment?
View 3 RepliesCamry :: 2007 Doors Locking As Soon As Move The Shifter Out Of Park
Experienced problem with the Automatic locks on the doors? The doors on my camry lock as soon as I move the shifter out of park. The owners manual indicates that I can get the doors to lock automatically at 20 km/hr. I have tried following the instructions in the manual to make this happen but without any success.
View 14 RepliesGolf IV / Jetta IV :: Car Stuck In Park / Couldn't Move The Shifter
2000 VR6 automatic. Yesterday my car was stuck in park couldn't move the shifter . Figured it was the brake sensor switch when the brake is engaged food pedal lights do not go out, I replaced it this morning but still won't work I've been driving it around in limp mode?
View 4 RepliesSanta FE SM (2001-06) :: Gear Shifter No Longer Moving Easily
When I went to put my car into gear today (automatic gear box, 2004) the gear shifter was very hard to move, as if whatever automated its ease is no longer functioning. And i'm pretty sure the steering and brakes are not performing with their power aided functions either. Is this a set of servos all on one line somewhere? Fried? Just a fuse?
View 6 RepliesSonata NF (2006-10) :: Shifter Won't Move Past Neutral Into Reverse And Go Into Park
I have a 09' 4cyl automatic engine with 54k.
About 30min ago when when I parked the shifter would not move past neutral into reverse and go into park. I can go from D into neutral or the next slot over for manual shifting. Naturally this causes a problem as you can't take the key out of the ignition if its not in park.
I took a screw driver and popped open the cap for the shift release button and used that to move it into park. Turned car off, back on, etc etc seemed fine. So when I tried moving it into reverse and it wouldn't budge. It instead would make a electronic click or snap coming form the steering column but more back toward the engine. Like more into the dash area but back in it. It would make this noise every time I attempted to move it but it wasn't a continuous sound. Just once with each jerk to the side to move it out of park.
So the car works fine except for this. I used it with the screw driver/shift release to unlock it and it drives fine. Goes into reverse and back in park but if I move it into neutral or drive it will not go back into reverse or park.
Ford Excursion :: Shifter Won't Move / Need To Step On Brake Before Shift Out Of Park
So lately this has been getting worst. You have to step on the brake before you can shift out of park. Well lately I have to step on the brake a few times before the safety will let you get into gear.
View 7 RepliesSubaru - Impreza :: 2001 - Hard To Get Into Gear And It Would Not Move In Reverse / Neutral Or Drive
I had a problem with the CV Axle and the Wheel Bearings. I replaced them already and I ran into another issue with the Wheel Studs and the Ball Joint, so I ended up replacing them as well. Yesterday I put everything back together after replacing all the parts mentioned before and I made sure everything was bolted down and tightened, and then the tire back on and lowered the jack. I started up my car expecting it to drive just fine and it was harder to get into gear than before and it wouldn't move in reverse, neutral, or drive. I called a Monroe Muffler around here and they told me that the CV Joint is probably not seated all the way inside the Transfer Case.
So later the same day I took everything back apart and made sure that I put the CV Joint back into the Transfer Case and I put the pin back in and made sure that both CV Axles would turn at the same time, which they did. I figured it was good so I put it all back together again and went through the same process as before, making sure everything was tightened down, all the bolts and nuts and pins were where they needed to be. Everything seemed to be good. I put the tire back on again, lowered the jack, started the car and attempted to drive it again. It still won't move. Why this is happening.
Santa FE SM (2001-06) :: Hard To Start - Revving Up To 3 - 4k In Park
1614 - Powertrain Control Module (PCM) harness is open or shorted - Faulty Electronic Throttle System (ETS) unit - Faulty Powertrain Control Module (PCM)
1191 - Electronic Throttle System Limp Home Valve On
Car is a 2004 santafe 3.5l automatic. symptoms are phantom revving up to 3-4k in park without me doing anything, sometimes car is hard to start, idle is very erratic/doesn't want to stay running. other times it starts and drives perfectly. from what i can gather this is some sort of malfunction in the electronic throttle system, and from searching people say "inspect ETS system", but i'm not sure what this involves. i unplugged every sensor i can locate in relation to the throttle system, cleaned them with electronic spray cleaner and put some di-electric grease. reset the ecu through battery disconnect, and problem came right back. local shop pulled the codes and said it'll be about 1200 for a new throttle body, and that the dealer has to reset it say what.
is there anything i can do with this sans bringing it to the dealer? i'm not even sure it would make it that far, driving home from the local shop it was in limp mode and i could only drive about 30 mph, and barely made it up hills. probbaly take me three hours to drive to the nearest dealer lol.
i replaced the accelerator pedal sensor about a year ago, and it also threw a code for throttle position sensor about a year ago also.
Golf IV R32 :: Shifter Seems To Move Quite A Bit When Accelerate Hard Or Let Off The Throttle
So after owning my R for just over a week I've noticed that when I accelerate hard or let off the throttle the shifter seems to move quite a bit. Is this normal with the stock mounts or is it something I should have looked at? I know the stock mounts are rubber to aid in isolating the vibration of the engine but it seems like the shifter moves a little more than I would expect.
View 1 RepliesToyota - Corolla :: 2004 - Shifter Hard To Move From P
Corolla '04: I have to press the brake pedal extremely hard to get the shifter to move out of the Park position.
View 5 RepliesImpala - Chevrolet :: 2008 - Shifter Not Able To Move Out Of Park Without Hitting Button Inside Center Console
I drive a 2008 Chevrolet Impala. The car has had some electrical problems going back about a year and a few months that I have neglected to fix. The first problem was with the shifter not being able to move out of park without hitting the button inside the center console to do a shift lock override, which started last August.
The second problem was with the ignition not being able to release the key without hitting a switch inside the ignition, which started back in the Spring. I have just been rolling along promising to eventually address those, but yesterday the car radio stopped functioning. Then this morning the car would not start.
The electrical system comes on just fine (save the radio), but when I go to start it the car just clicks over. I did not leave any lights or switches on, so I am assuming it must be some sort of problem with the electrical system.