Neon :: Need TDC For Harmonic Balancer?
I'm about to change out my harmonic balancer and have been reading some sites that tell you have to put it at TDC and other sites say "no" unless your messing with the timing belt. I have a 2002 dodge neon.
View 1 RepliesIntrepid :: 3.5 How To Get Harmonic Balancer Off
on the 3.5 how do I get the harmonic balancer off? I know that you need to use a 3 arm puller. I have a 3 arm puller but I cant seem to figure it out.
View 9 RepliesGolf V R32 :: Rear Harmonic Balancer Degrading?
The MK6 GoRf seems to have a problem with the Rear Harmonic Balancer on the Driveshaft to Haladex Coupler. I will have a look under the car this weekend just to check it out. By the way, I have no driveline vibration under acceleration. Wonder if the problem is with more power/torque on the turbo engines. But we have plenty of boosted VR6 engines, and I wonder if there are problems with the part.
[URL]
Buick :: 1947 - Harmonic Balancer Removal From Engine
How to remove a harmonic balancer from a straight 8 Buick engine. There are no bolt holes on the balancer to use a standard balancer removal tool. I was able to remove the center bolt. I removed the center bolt then threaded it back in a couple of threads and tried using my hydraulic gear puller with the center of the puller on the bolt. I got it to move off about 3/16" but then it stopped. Right now I have the hydraulic puller still on under tension and am periodically spraying it with screw loose hoping it may pop off. I need to know if this will work or if I am fighting against the puller now.My 42 to 47 Buick manual does't give any info on removing the balancer.
View 5 RepliesFord Ranger / B-Series :: 1997 - Harmonic Balancer Seems To Be Stuck?
I have been stuck at the tail end of the head gasket job on my 97 B2300. I have been working every day, so I haven't been able to get to this until today. The harmonic balancer seems to be stuck and I can't get it off. Regular 3 jaw pullers won't work (tried 4, rented one from the parts store that didn't work either) and tapping it from the back side while rotating the engine isn't working either. The pullers keep slipping off because the of the pulley's front ridge being slightly larger in diameter than the rest of the balancer.
Is there some kind of special puller that I don't know about? I don't want to be too rough with it as it seems no one carries this particular balancer if I happen to break it. Side question..... I was told that the crank/cam seals will also work on the oil pump as they are the same size. True? I happen to have 3 seals and wouldn't mind changing the oil pump seal as a precaution. (note this is a later 2.3 with a timing belt driven oil pump)
Ford Ranger / B-Series :: 2000 - Harmonic Balancer Removal?
I have a 2000 2.5 and need to remove the harmonic balancer. Are the threads righty tighty or lefty loosey.I'm replacing the timing belt and pulley
View 1 RepliesFord - Tempo :: 1993 - Rattle Came Back After Changing Harmonic Balancer
I changed the harmonic balancer in my 93 ford tempo but the rattle came back!! Last night we tightened the bolt on it with 700 psi but it's still rattling! Could it be a bad balancer or another part that is lose? It rattles at idle and goes away while driving. It just started again the day before yesterday (I thought my husband was just looking to play with the car more) and by last night it got really loud. It's a deeper rattle then the rattle it had before we changed the balancer. Could there be something way out of balance that is causing the balancer to do this?
View 1 RepliesFord - Mountaineer :: 2000 - Chirp / Squeak When Cold - Harmonic Balancer Noise?
I have a 2000 mountaineer 5.0 that has a chirp/squeak when its cold and goes away once warmed up good occasionally. I have replaced the belt, alternator and manually spun all the idler pullies, water pump, ac and tensioner. Nothing squeaks. Is it possible for the harmonic balancer to make this noise?
View 14 RepliesFord Ranger / B-Series :: Hop In The Truck And Belt Starts Squealing - Harmonic Balancer Came Apart
Couple days ago, hop in the truck to go to work and belt starts squealing. Belt was old and it had been raining, so I figured it was a little wet. Turned on the defrost, and squeal gets worse. I then smell a burning. Opened the hood and saw the belt dragging on the a/c pulley, so I figure the compressor clutch is shot.
Looked at it today. I was wrong. Took off the belt and the a/c pulley spins fine. I can turn it's front hub by hand as well. I look around and see the crankshaft pulley isn't lined up. It looks like the outer pulley portion separated from the rubber. This caused the belt the jump and ride on the rubber part, cutting grooves in it.
Here's some pics:
From top driver's side:
From top passenger's side:
From bottom passenger's side:
Ford 6.0L Power Stroke Diesel :: Crank Pulley / Harmonic Balancer Bolts - Replacement?
I am reviewing the ford assembly instructions before I put my engine back together and noted that it indicates that the balancer bolts are torque to yield. I thought it odd but is it really necessary to replace these? Is it done in practice?
View 1 RepliesSanta FE SM (2001-06) :: 2005 - Ticking Noise / Blue Spark Occurring At Random Intervals On The Balancer
2005, 2.7l. FWD automatic, with 180,000+ miles.
A week ago it started making a random ticking noise I've never heard before. Today was the first chance I got to try and find it and I'm stumped on what could cause this.
The sound is a static or low voltage electrical discharge coming off the harmonic balancer. I can actually see the blue spark occurring at random intervals and locations on the balancer as the car is running.
Do i need to be looking for a bad engine ground? I'm having no other electrical problems. The car runs like a champ other than a minor oil and power steering fluid leak.
Santa FE SM (2001-06) :: How To Replace Serpentine Belt
I need to replace the serpentine belt on my wife's 2001 Santa Fe 2.7 V6 but I can not seem to figure out how to get the tensioner off.
View 1 RepliesSanta FE SM (2001-06) :: Replace Odometer Dashboard Light
The light for the odometer in my 05 Santa Fe has gone out. Every other light and the dimmer switch work fine as do the taillights. What do I have to do to replace the bulb?
View 19 RepliesSanta FE SM (2001-06) :: After Driving It Won't Shut Off - Replace The Ignition Cylinder Or Switch?
I've been having a "turn off" problem with my 03 santa fe. After driving it doesn't want to shut off. The switch will be in the off position and it just keeps running. When I put it in Reverse or drive and then turn the switch off it stops. But which should I look at first? The ignition cylinder/key replacement or maybe something in the ignition switch/electrical? The cylinder assembly is over a hundred $$ and the switch is only $25.
View 3 RepliesCamry :: How To Time A 2004 2.4 Ltr Counter Balancer On The Crankshaft
cannot find instructions on how to time a 2004 2.4 ltr counter balancer on the crankshaft.
View 2 RepliesSanta Fe (CM - 2007-12) :: How To Replace Fog Light Bulbs
What are the steps involved in replacing my fog light bulbs? One burned out. And what's the correct bulb replacement number?
View 5 RepliesSanta Fe (CM - 2007-12) :: How To Replace Engine Air Filter
How to replace the engine air filter in my 2010 Santa Fe? I can see where it is but I am having a hard time taking it out after I loosen the clips.
View 19 RepliesSanta Fe (CM - 2007-12) :: 2011 - Struts Are Leaking - Should Replace Them?
Have 63,000 miles on my 2011 Sante Fe. Took it in for maintenance at the dealer in Connecticut and the mechanic said the struts are leaking. I took a look at them and did notice that they have more of a sweat look on them. Dealer is quoting 750 to replace. Sounds high to me.
View 6 RepliesSanta FE SM (2001-06) :: 2004 3.5 Engine Will Die Randomly
Engine will die randomly. After sitting for half hour it will restart. It has been to the dealer, it sets no codes but when it dies all lights on dash come on just like when you first start car. It has 75k on it timing belt replaced new plugs and wires. Dealer kept it 2 days and could not replicate the problem.
View 2 Replies