Santa FE SM (2001-06) :: 2002 2.7 4wd Acts Like It Is In Neutral
I bought this santa fe for parts for my other identical santa. When you take it out of park into r everse drive 1st 2nd gear it will idle down 200 rpm. It had no codes till I revved it up and moved gears. Codes trans module shift selonoid b and c. It makes no noise or vibration. The torque converter does not grab what so ever if it is even moving. I want to fix it now that I see its better condition.
View 1 RepliesSanta FE SM (2001-06) :: Idling Very High When Put In Park Or Neutral
My 2001 Hyundai Santa Fe has recently started idling very high when put in park or neutral. While in drive the engine idles above 1K and you need to keep your foot on the brake to keep from moving forward. If you shut down the vehicle while idling high, the car will not start right away. It needs to cool down for 10 -15 minutes before restarting. It will run fine for awhile but will go back to revving up again.
View 7 RepliesSanta FE SM (2001-06) :: 2004 - High RPM In Park And Neutral
I'm having trouble diagnosing a high RPM in park and neutral on my 2004 Santa FE 4WD 2.7L. Idle's great in drive and reverse. Occasionally when I start the car up it will shoot up to 3000 RPM until I shift into drive or reverse with a heavy thunk. Then it drives fine. When I shift back into park when I'm done driving, it will shoot back up. To avoid this, I just shut the car off in drive and then shift to park.The weird thing is, sometimes it doesn't happen at all. Sometimes it starts right up and shuts down with perfect idle. However, once I give it some throttle in park in these instances, the idle will jump back and forth between 1500 and 2000 and won't die back down to 800 where it should be until I shift into drive or reverse. Not sure what's going on.
I've replaced the idle air control valve, purge valve solenoid, and camshaft position sensor, but to no avail. I also replaced the throttle position sensor a few weeks ago, but that didn't seem to do anything, so I took it back. I'm wondering if I maybe didn't do the correct installation procedure. I still have the old grey TPS for what it's worth. Should I change this? I've also played with the tension in the throttle cable, but I don't really know how to get it exactly within specifications. I definitely removed some slack. I just checked for vacuum leaks using the cigar method with a hose from the PCV valve with the throttle body sealed with saran wrap, but I couldn't find anything. My method was shoddy, and I don't really know what I'm doing, so I wouldn't rule out a vacuum leak by any means.
Santa FE SM (2001-06) :: Auto Transmission Slipped Into Neutral
While driving the other day the automatic transmission in my 2003 Santa Fe slipped into neutral. I pushed the car home wherre it currently sits. I checked for error codes and found none. There is a grinding noise when I shift from any gear into park.
View 1 RepliesSanta FE SM (2001-06) :: Jiggle The Shifter To Get Engine To Crank - Neutral Safety Switch?
I have a '05 santa fe, auto, 2.7L, 4WD...sometimes I have to jiggle the shifter to get the engine to crank...would this be the neutral safety switch? or is there something in the shifter housing that could be causing this?
Maybe a minor adjustment... Just a slight movement of the shifter and it fires right up... If it is the neutral safety switch..where is it located? on the trans?
Santa FE SM (2001-06) :: Car Starts Up And Idles At Around 2,000 Rpms
This all started out when I wanted to change my original plugs that had 200k miles on them. I have that part done now and new wires. Then it wouldn't start without me starting it while holding the gas pedal down. Then I would have to press the pedal down or it would die.
I may need to clean the throttle body. I bought some Valvoline Throttle Body Cleaner and cleaned the throttle body it was black inside and now it's nice and clean. After that the car starts up fine except on the first try. It starts up and idles at around 2,000 rpms. When I press the brake it drops to 1,000, then back up to 2,000. The strangest part is I have no acceleration power now. I can press the pedal to the floor and it will only go to 3,000 rpms. It will slowly get faster as I drive but there's no immediate response when I press the pedal down.
Why would cleaning the throttle body do this? It throws a code when I first start it and it dies the P1110 code but I think that is because the rpms are at 600 when it catches it. No misfire codes or anything, so I think the plugs and wires are working. Just the faster than normal idle now and no power when I press the pedal down.
Would the throttle body cleaner hurt the throttle position sensor?
Santa FE SM (2001-06) :: 2004 - Starts But Won't Idle
We just replaced the starter on a 2004 Hyundai Santa fe 3.5. The car now starts, but won't idle. I can keep my foot on the gas and keep it running, but as soon as I let my foot off the gas it dies. We didn't have this problem before replacing the starter. Where to start looking?
View 3 RepliesSanta FE SM (2001-06) :: 2.4 Starts Then Shut Off After 3 Seconds
My car has the same issue, its a 2001 santa 2.4 . Its starts and then shut off after 3 seconds. camshaft was replaced twice already. still same issue, die after 3 seconds. everything seems to be fine.
What about fuel pressure at the rails? If the pump runs for a moment when the key is turned to the on position then when cranking it stops. That would let the engine start and run for about three seconds. Could it be the ignition switch?
Santa FE SM (2001-06) :: Engine Starts Then After About 10 Seconds Cuts Out Straight Away
My beloved Hyundai Santa Fe,2006 model's engine light came up. The engine starts and than about 10 seconds after cuts out straight away. What to do. I have always taken care of this car and being serviced well.
View 23 RepliesSanta FE SM (2001-06) :: Starts And Stalls Immediately - Fuel Pump Bad?
I have an issue of fuel pressure I believe on my 2003 3.5 Santa fe...It would start then stall...I'm at my wits end with this thing...I checked the relay and its good...checked all fuses and they are good...I don't hear the 2-3 second whine of the pump when I turn the ignition to the on position, so I suspected a bad pump...but before I bought a new pump I took out the back seat, removed the access cover and checked the connector to see if the pump is getting power...its not...I'm at a loss as to where to look next...
View 35 RepliesSanta FE SM (2001-06) :: Cabin Fan Stops Then Starts With Audible Clicking
My 3003 Santa Fe AWD has an issue with the blower fan. It stops, then starts working and clicking can be heard behind the dash when this happens. The clicking seems to increase when the climatization switch (the one that switches the air to the front vents, foot wells, windshield, etc) is turned off. When it clicks while the switch is on the off position, the blower blows for a split second every time the click is audible. It kind of turns itself on/off. Before I start replacing parts, I suspect the fan relay to be the culprit, but I'm not sure.
View 2 RepliesSanta FE SM (2001-06) :: 2002 Starts Running Erratically Like A Misfire
My Santa Fe driving me crazy. Have a 2002 Santa Fe 4 cyl with a problem. It will start when cold and run normal about 2 minutes. Then it starts running erratically like a misfire. If you let it idle this way it will stall quickly and not restart until totally cold again the next day. If you catch it quick enough and continually pump the throttle it continues to run rough until it starts to warm up. As it warms up the engine slowly improves until it reaches operating temp. At this point the misfire is much less but still there. If you shut it off for more than 10 minutes it will not start until the next day. There are no codes at this time. I have changed the coolant temp. sensor, the cam position sensor, fuel pump and screen, spark plugs and wires. I have also verified all timing marks on the crank, cams, etc. The crank sensor was replaced about 40k ago when the timing belt was replaced. What can I look for now???
View 2 RepliesSanta FE SM (2001-06) :: Codes PO171 And PO401 - Car Starts To Bounce A Little Until Let Off The Gas
I am getting two codes, p0171 and p0401. Both point to something with the fuel are mixture I believe. My problem is that I can not figure out what the problem is. As far as I can tell there is not a vacuum leak. My MAF sensor looks clean and close to brand new. The codes come on and the car seems to want to jump. It does not stall, just starts to bounce a little until I let off the gas. And it does not do it until the car is warmed up. 2001 Santa Fe .....
View 4 RepliesSanta FE SM (2001-06) :: AC Starts Blowing Warm Humid Air In Stop-and-go Traffic
This weekend was a nice high 80's low 90's. My AC is usually ice cold. However now that the weather hit that high, when we are in stop-and-go traffic, the AC starts blowing warm humid air. I do see the temperature need creep a bit higher than the normal range.
Once we start driving, after a few minutes, the climbs back down and the cold AC returns. Turning the fan speed down, or turning the compressor off, then on again, seems to work.
What could be causing this? A friend said he has this issue with his car claiming the engine is the issue, not being powerful enough to keep the compressor running right, is that possible?
Santa FE SM (2001-06) :: 2002 V6 Starts With Cranking Cycle Then Dies With Key In On Position
High mileage santa fe 190K+ miles. Will only start while cranking. Dies when key is in "on" position. Fuel pump runs/cycles normally when turned to "on" position. No obvious vacuum leaks. No intake obstructions. Vehicle will cont to run using starting fluid. Vehicle starts, idles and runs (somewhat poorly) with MAF unplugged. Fuses appear ok (although the fuse cover/fuse index is lost). Stranded at rural property with limited tools and average abilities.
View 3 RepliesSanta FE SM (2001-06) :: TCS Off / ABS Lights Turn On And 4WD Light Starts To Blink While Driving
I have a '06 santa fe 3.5L My "TCS OFF" light "ABS" light turn on and my "4WD" light starts to blink while I am driving. Also my Transmission shifts hard and the engine revs funny (hard to describe what it actually sounds and feels like) when the automatic transmission shifts from 2nd gear to 3rd gear. It shifts find from 3rd to 4th and down shifts from 3rd to 2nd just fine. Just have problems shifting from 2nd to 3rd and it only seem to happen when the lights I mentioned above turn on. What going on? Is this all being caused by a speed sensor? My ABS also seem a little touchy activating when road conditions are not that bad.
View 1 RepliesAcura - RL :: 2002 Only Starts In Neutral
Sometimes my 2002 Acura RL will start right up. I go shopping, come out a half hour later and it won't start. Has a new battery, no clicking noises. If I get it into neutral and push it the car will start. Would this be the starter motor, fuel lines, alternator? any guesses?
View 7 RepliesSaturn :: 2008 Only Starts In Neutral First Time In Morning
Have a 2008 Saturn - 30,000 miles. Most times it only starts in Neutral first time of day it is used. After this, fine. Had with dealer mechanics for 2 days and they say they can find nothing wrong. Can't do anything unless they have the problem.
View 3 RepliesFord F-150 - 1997-2003 :: Truck Only Starts In Neutral
I started having trouble with the truck only starting in neutral and it was a trick to get it to start even then. I bought a new range sensor, bolted her up (with alignment marks in neutral) and she's still doing the same thing.
View 8 Replies