Prius (2004-09) :: Gauge Stayed At One Pip And Fuel Display On Multi-Function Display Won't Reset
Not the usual. I stopped on my way home to get gas tonight when the gauge was showing one pip. Naturally it wasn't low, but I'm used to that.
The odd thing is that after I got in the car and turned it back on the gauge stayed at one pip and the fuel display on the multi-function display didn't reset.
Gen 2 Prius (Audio/Electronics) :: Multi-Function Display (MFD) Only Shows Toyota Logo
My MFD now only shows the Toyota Logo, whatever I do. Also, I cannot play music. The trick with pressing (hold) INFO and headlights three times does not bring up a diagnostic screen. My theory is that the MFD is waiting for some signal over the network before showing the usual screen (and it never gets that signal). Some years ago, I had a third party fit a new audio tuner and player (non-Toyota), and that worked more or less fine for years.
They had to leave the old faulty Toyota audio in the circuit to make it all work, and they said to leave the graphic equaliser on even settings, and then forget it. The old Toyota audio CD changer had failed, but the rest was OK. My 'guess' is that they had to leave the old audio device connected because it terminates the AVC-LAN with a 60 ohm resistor. Maybe that connection came off, and now the LAN signals are not good, and the MFD is locked up 'always waiting' for the signal from an ECU.
Camry :: 2007 XLE 4 Cylinder - E Appeared In Multi-function Display And Will Not Shift Out Of Park
The wife was driving the 07 XLE 4 cylinder the other morning. Temperature was around 2 F. She started the car. It started right up. Drove for around 5 minutes and shut the car off and went in to a store for 5 minutes. When she came back out and restarted the car an "E" appeared in the XLE's multifunction display and the low tire pressure light was also on. The car would not shift out of Park. The wife called me. I told her to shut it off and try restarting it. Same thing.
I then told her to shut it off and take the key out of the ignition and then try reinserting it and restarting it. That worked; it eliminated both codes and the car was able to be shifted normally out of Park. Since I still have about 10 months coverage left on my Platinum Extended Warranty the wife and I took the car over to the dealer. When I had my wife explain what happened to the dealer's service writer he just said I have never even heard of the "E" symbol. The tech said he never heard of it either. They did check out the car's shift/interlock system including the brake light switch, but could find nothing wrong.
Passat (B6) :: 2007 - Multi-function Pixel In Display Shift Vertically And Warp?
Just picked up a CPO '07 Passat Wagon (Sport Pkg2, 30k on the odo) and recently found the multi-function display between the tach and speedo has a malfunction. It sort of behaves like a melting screen saver where all the pixels in the display shift vertically and warp, or it blanks out all together and throws up a vertical stripe about 5 pixels wide. All the steering wheel controls work fine and index through the functions as expected. It has done this pretty much every time I drive the car since I picked it up.
The car obviously has plenty of warranty left so I have a service appointment at the dealer next week, but just curious if this is a common issue- a forum and google search yielded nothing. I've had a couple A4's in the past that had trip computer displays that acted up in hot weather, but not like this. Also, my in-laws have a MkV GTI with the same/similar trip computer and it hasn't ever done this.
Lexus RX 2004-09 :: Non Multi-information Display Panel To Touch Screen Display?
Recently, i just bought an multi-information display panel (with touch screen support) to integrate into my RX330 which is a non touch screen NAV display panel.
The 2nd hand multi-information display panel is from a 2004 RX330 and what are the socket behind the display panel meant for.
what is the 4 socket connectors as indicated in the red circle in the image should be connected to?
Prius (2001-03) :: Won't Start / Multi Function Goes Off / Ready Light Doesn't Come On?
Multi function goes off and ready light doesn't come on when turn key to start.
View 1 RepliesPrius (Gen 3) :: Multi Information Display Blank / Not Working
My wife on her way home from work called me to say that the MID screen was blank - not working. I asked if she could drive the car, she could, but the energy monitor screen that she has on usually was not coming on. Her concern while driving was that she could not tell how fast she was going.
Fortunately, just a week ago I had installed Scangauge II in her car and had her convert one of existing gauge to MPH. This is a new 2012 Prius IV that is about 2 months old. I'm pretty sure that MID can't be turned off.
Prius (2010-12) :: Lights Goes On - Multi Informational Display Goes Off
When I have my daytime running lights on, all is fine. When I switch to anything else on the stalk, including my night time head lights, it goes off, along with some temperature control background illumination. Only the shift icon stays on the MID. When I switch back to daytime running lights, everything goes back on.
View 6 RepliesPrius Plug-in 2012-15 :: Multi-information Display Changes On Its Own?
Every day I stop at my mailbox to get the mail. I get out of the car with the FOB in my pocket and leave the car running. When I close the door the car beeps three times to let me know it's still on. This is exactly how my 2010 Prius operated. However, when I get back in the car the multi-information display always changes from the hybrid system indicator screen to the energy monitor screen. I always have the HSI on as default. This isn't a huge deal but it's kind of annoying. Is there a setting somewhere that I can change that I've missed?
View 6 RepliesPrius (2010-12) :: Turning Off The Multi-information Display?
It distracts me too much and I can't seem to get better than 45 mpg no matter how I drive (regular mode mostly highway). Any way to turn it off permanently?
View 11 RepliesPrius (Gen 2) :: 2007 Multi Information Display Stopped Working
In my 2007 Prius my multi information display didn't come on when I started it up.
View 4 RepliesAurora :: Parking Lights Go On And Off - Bad Multi Function Switch Or Module?
My parking lights go on and off when the car is off. I had problems with the headlights flashing about 3 years ago and fixed it with spaying contact cleaner and air in the multi function switch and that fixed that. I tried the same thing several times to try and fix the blinking tail lights but doesn't work. I just replaced the (LCM) lamp control module but still does it. Somebody told me today that it could be the security module. I'm thinking that the multi-function switch needs to be replaced. Is there a fuse or a way to shut down the (LCM) and just turn the lights on and off manually?
View 2 RepliesPrius (2004-09) :: Center Display Ceased To Work
I have a 2004 Prius and in 2007 my center display ceased to work. I had my local Toyota dealership replace it. Well low and behold it is shot again. There is a picture display but the touch buttons do not work. I called Toyota again to see if the price has come down. Apparently in 2007 when my display was replaced it was replaced with a refurbished one and mine was sent to a company who refurbishes these units. I was told this process no longer exits and I would have to purchase a new unit from Toyota. I haven't done it. I am using the controls on the steering wheel. How to resolve this?
View 2 RepliesFord Super Duty (1999-2016) :: 2000 - Multi-function Switch Won't Working?
I have a 2000 Excursion LTD with a V10, auto, 2wd. My problem is in the multifunction switch...I have no high beam flash function when the headlights are off, nor will the high beams illuminate when the lever is pushed forward. All other functions work as expected. I feel that the malfunction is minor and may be nothing more than a poor contact or bad fuse. I would rather not have to buy a new switch.
View 6 RepliesFord F-150 (2009-2014) :: Wiper / Turn Signal Multi-function Switch Replacement
Looking for a tutorial on how to remove the multi-function switch? I have the, seemingly, common issue of wipers not turning off. I bought the new switch, but don't see how to get it out without taking the whole steering wheel off. I can't get to the screws on it at all. I got the plastic covers off, but can't see how to get the switch out.
View 3 RepliesGen 2 Prius (Audio/Electronics) :: 2004 - Display Dead - Hard To Shut Off Intermittently?
I have 2004 Prius with 150K miles. All of a sudden, display went dead. A/C controls working fine but other half of MFD is not responding. It was also difficult to turn car off. Took several attempts and finally was able to turn car off. My Prius does not have GPS in it. Car starts and runs fine otherwise.
View 2 RepliesTouareg :: Display Shows The Hood As Open / Wipers Work Intermittently
Everything was going good on my V8 until this week. Out of nowhere, the following happened all at once:
1. Display shows the hood as open, even though it is not.
2. Wipers work only when they want to
Also, cover to ash tray/lighter in center console popped off its tracks.
How to deal with this stuff on my own, or am I headed to service?
Prius (2004-09) :: Display Does Not Work Properly On The Climate Control Screens
I just bought a 2007 and my Multi Information Display does not work properly on the climate control screen or information screen. ie when you press temp up or down buttons it sometimes works and when you want to change the fan speed and press medium it goes to low. On the information screen no matter what you select it goes to Trip information screen. However the Audio screen works perfectly.
View 3 RepliesPrius (2004-09) :: Touch Screen Work Intermittently?
I have a 2009 Prius with 65,000 miles and have recently noticed sensitivity trouble with the touch screen. At times it will not react to my button presses and other times if I touch one part of the screen the touch will be registered in another area of the screen. Usually I turn the screen off (if I am able to get the touch of the off button to register) and restart later.
View 9 Replies