Accent LC (2000-05) :: OBD2 Scanner - Couldn't Connect ECU
Today I bought an OBD2 scanner and was trying it on my 2001 accent but the app on the cellphone ( torque ) said : " couldn't connect ECU " . I think there is no ECU in my car, any example about trying the OBD on a 01 accent ?
Link to OBD2 : .........
Passat (B5) :: 2000 - OBDII Scanner Won't Read For Emissions Testing
I got a Passat 2000 OBD-II scanner won't read for emissions testing. I did the test in 5 different place all the time when they ask to turn the key and the computer from emission test give a error and stop.
I have a radio aftermarket one of my friend have this problem and he have to install the original radio. So I buy the wire harness and the radio i install and still not able to do the emissions test.
My ABS light is flashing but my friend said this is not a problem he fix more than 4 car just replacing the aftermarket radio....
Passat (B5) :: How To Connect IPod
How do you connect your Ipod? New deck, cable, or wireless?
View 24 RepliesPassat (B6) :: 2008 - How To Connect IPod To 3.5 Mm Jack
I have a 2008 Passat Lux with an ipod dock in my glove compartment which I would like to turn into an aux input if possible. There is no AUX input under my hand-rest so the ipod connector in my glove compartment seems to be the only way for me to listen to my music from my phone in the car. I have found several cables that convert IPod to 3.5mm jack (and hopeful vice-versa?) Will this work somehow or am I stuck with the ipod connector without any aux input?
[URL].........
Passat (B7) :: 2014 - Take Time To Warm Up - Bluetooth Won't Connect Without Restarting
so I just got a 2014 Passat S (with NAV) and I'm having some Bluetooth auto connection issues - only when I start my car to let it warm up for a few mins while I run back inside (I live in New England and leave the house at 5am when it's 5-10 degrees out). My fiance's Santa fe keeps an option on the screen that reads "could not connect to phone, re-try? Yes or No" and you can click yes and she's instantly connected. When I start my car to warm up for a few mins I've tried manually doing it when I get in the car under "paired devices" but it fails every time. I want to get a remote starter but I don't want to turn the car off then on again every time so my phone will connect. I have to turn the car off then turn it on and it will instantly connect. When I'm just getting in and going it's no problem.
View 5 RepliesPrius (Gen 1) :: OBD Scanner From ECROS Won't Run
I purchased a Gen I prius (non running) two years ago for a very low price and kept it in dry storage. At the time it threw a P3125 code on the ECROS scanner and would not start.
I finally have the non-running one in my own garage and am trying to get it running. The HV battery has been charged to 285 volts by a DC/DC converter I built. Last year the car would power up the ECROS OBD scanner and throw a P3125 code and I could hear the main HV Battery relay connect then disconnect. Now when trying to start it the 12 volt systems work, the OBD scanner from ECROS will not run, it has power, but no data - no OBD signal I guess, and no HV contactor noise either. I took the Vehicle ECU out from under the passenger carpet and replaced it with a good one from one of our daily drivers and still no OBD signal. I have checked all the fuses and no blown ones in any of the three fuse boxes. With the used Prius ECU in the daily driver, the OBD does work, the daily driver does not start, but no error codes.
Why does the OBD II not fire up the ECROS scanner in the broken Prius?
Caravan/Voyager :: 1996 / 3.0L - Scanner Does Not Link With ECU
I'm having trouble with my 96' 3.0L, its kind of crazy its intermittent and while driving the engines surges one or twice and then dies... when I try to crank it up again cranks but don't starts if I try again it wont even crank ( no starter winding up ) what I noticed is that is I'm driving when it dies my check engine light disappears for a while and if I connect my OBD 2 reader does not link up with the ECU if I wait a while and I crank it up again its starts and the while cranking up I can hear a bang noise from the engine compartment drives side and then after a couple of minutes dies again...
View 4 RepliesCavalier :: 2001 - Service Light On But No Codes On Scanner
I have a 2001 cavalier with the service light on. i hooked up my scanner but there are no codes. My daughter recently wrecked it and knocked out the passenger side headlight and turn signal. Will the service light come on if a bulb is out?
View 4 RepliesPrius (Gen 3) :: Does OBD2 Scanner Consume The Power When Car Turns Off
I bought a KitBest mini Bluetooth OBD scanner on Amazon last week since my car’s engine light is away on when drives. This tool pairs with my samsung galaxy s6 perfectly, now I can get tons of information of my car. But I am not sure whether need to plug it out from obd port when the car turns off
View 15 RepliesTouareg :: Scanner Stated A Leak In The Intake Air System
Yesterday, my check engine light turned on and in checking the scanner stated that it was a leak in the intake air system. I'm a student and don't have a lot of money, I was wondering if this something I can check myself or even fix.
View 4 RepliesPrius (2004-09) :: Scanner Found Code U0293
Scanner found u0293,,,recommended reseal power inverter. what I have read for two days says its Power source ECU.. What happened,,,kids was driving car, had 3 phones plugged in, ac, lights, and when she tried to set cruise, car went into limp mode, gear lights flashing,,,went into neutral,,,stop beside highway,,had to be towed.
12 volt battery charged and tested ok. no blown fuses. I reset ECU by jumping pins 14 and 4. no change, tried master reset by holding brake and power button down, no change..removed ecu fuse to reset, no change.
Golf IV / Jetta IV :: 2000 - CEL On / OBD Scanner Won't Read Codes
The past week, the CEL of my Jetta 2000 was on, and a couple of days after, was off. But yesterday was relit. I take my car to Auto Zone to check codes with scanner, but was impossible read any code, the lector can't connect with computer. I thought in fuses, but the fuses are fine.
Searching on google, i found that the reason could be the aftermarket radio, but I am not sure about that, the connections are seen aparently fine. I Read in one thread that disconnecting the aftermarket radio harness is enough to can read codes from computer.
I read also that the scanner could be incompatible with VW cars, but I don't think that, because AutoZone should have a scanner compatible with most of the common cars models.
The fact is that I don't want to get in troubles with the harness of radio, I don't have tools like multimeter neither knowledge about electrical systems, i just want to know if disconnecting the radio harness is enough in order to read codes. (in case of the problem be on the K-line wire).
Lexus GS 2013+ :: 2014 - ODB2 Scanner Won't Working?
I have a 2014 GS350 F-Sport and having issues with odb2 port.
So I have a odb2 scanner that I have been using on my other cars but when I plug it into my 2014 gs, it doesn't even turn on. I took it to the nearest dealership to have them test it out and they were able to connect it using toyota/lexus computer through odb2 port....
My odb2 scanner is from 2006... is there a different version of odb2 scanner that I need to get?
Silverado :: 2004 Z71 Won't Start - Getting Error Code U1000 On Scanner
I have an 04 Silverado Z71. I am getting error code U1000 on my Scanner. As well as a torque converter code and a front axel code. I can not start the truck. Its as if its in a safety lock out or something.
I talked to a service tech at the lock gmc dealer and he said the U1000 code was definitely the reason it wont start. Possible bad ECM somewhere in the system.
Where can i find a full wiring schematic for my truck ?
Corolla :: 1998 Connected Pocket Scanner - No Codes / Car Won't Start
My 98 Corolla won't start, but I have checked battery, fuel pressure, spark, efi relay, and fuses, which are all good. Can't figure what to fix?
Have connected a pocket scanner but I get no codes.
Prius (2004-09) :: Detecting Check Engine Code Without A Scanner
I've been searching a way to read my check engine code WITHOUT a scanner (scan gauge etc...). I have a 2008 Prius and given that there is a lot of things that we CAN program just by presets, it would be surprising if there wasn't a way to read the error codes by some keypresses. Heck, in reality there should be a page on the MFD that just shows the error in english.
View 5 RepliesAccent MC (2006-11) :: 1.6 Motor Won't Start / No Spark - Scanner Not Linking Up
I got a 2008 accent hatch basic model. Its got the 1.6 motor with 23k miles. It will not start at the moment. Battery is good, I am getting fuel. It is not getting spark, and my scanner wont link up to it. I don't know what else to trouble shoot. I am out of warranty car is a salvage title,car ran fine until today. I am thinking the ecu fried but I don't know? All fuses good. What can i check or how do I troubleshoot?
View 6 RepliesGTI 337/20th Anniversary :: 2002 - OBDII Scanner Won't Connecting Anymore?
'I'm having an issue with my OBDII scanner not being able to read my ECU. I've never had issues before. I've been using a generic OBDII scanner with the Torque Android app for years but now suddenly it just doesn't connect. My biggest issue here is I have a smog check due in a few weeks. I took it to a smog check station and the guy used two different OBDII scanners with no luck. What could be the issue? Is it a blown fuse or something? If so, which fuse is it? (And no it has no aftermarket radio installed)
FYI: 2002 GTI 337
Prius (Gen 3) :: 2013 - ODB II Scanner Caused Check Hybrid System Error
I purchased a Bluetooth ODB II scanner off of Amazon which had all positive reviews, plugged it into my 2013 Prius this AM and the car immediately started beeping with the "Check Hybrid System Stop The Vehicle In A Safe Place" error. The car is functioning just fine but I'm concerned.. Is this normal? Should I have not plugged it in while the engine was on? I want to see if I can clear the error but I'm afraid to plug the module in again...
View 18 Replies