Passat (B6) :: E-Brake Won't Release When Change Brake Pads?
Having issues with the auto-ebrake? My friend has a 09 passat with the push button ebrake. He was changing his brake pads when his ebrake will not release. He was told by VW to not use a c-clamp to depress them as they would mess up the sensors or something along those lines.
View 14 RepliesPassat (B5) :: Brake Noise After Swapped New Pads
My independent mechanic just swapped out some PBR Deluxe pads that he put on with new rotors in June with with PBR Deluxe Plus pads. He did this free of charge because the front brakes were making a loud metallic clunk sound on the first brake application when backing up (weird, no?), and they were dusting like crazy. Back in the summer I followed the bedding-in procedure fellow Vortexers recommended. Aside from the clunk, the brakes were silent, though extremely dusty.
Well, after a couple of drives with the Deluxe Plus pads, I can say that they perform very well, just like the Deluxe pads before them. It's too early to tell if the dust issue is better, but the metallic clunk is still there, though far quieter than before (even with the windows open); I'd say its more of little click now.
But here's what I really don't like. I took the car out tonight to bed the brakes, doing 5 or 6 60-to-30 mph runs, followed by 5 minutes of 40-50 mph cruising with little braking and no real dead stops. All was good until I went to get gas afterward: as I slowed to <10 mph, I heard some squeaking from the fronts. Not hugely loud, but enough for me to be upset about.
Did I do something wrong? They were fine until the bedding-in run. Maybe the temperature (20s) played a role? I didn't think I went too nuts on them. I'm hoping I don't hear the squeak tomorrow. What about the persistent click I hear when braking for the first time in reverse? Could this be related the excessive dust with the PBR Deluxes?
Passat (B5) :: Rattle Which Sounds Like Brake Pads Came Unglued
My 99 Passat 1.8T eats brake pads and rotors like crazy. After about six months I hear a rattle, which sounds like brake pads came unglued. After a month of rattling, the pads must shift into a new groove on the rotor, and pulse like crazy. I can handle that, but this time the parts store gave me pads without the wire coming out of the pad. I thought the wire was just a brake wear sensor, and I figured I didn't need it, but now my ABS light is on. If that is a wear sensor Can I loop the old wire and bypass the system? I like having ABS. Also, with the two piece caliper, the spring holding the two pieces together broke. Can I get a new spring? Or do I need a new caliper? I appears the brakes function with the damaged spring, but I'm guessing the pads will wear unevenly. Or maybe the abs light is because the pads are seated funny because the caliper isn't sitting right?
View 4 RepliesPassat (B6) :: Rear Brake Pads Wearing Too Quickly
My car has about 37k on it; and while the front pads look to be about 50% worn; the rears look like they are closer to 90%. Is this normal? The car is also sluggish while braking especially when the engine is being auto-revved to keep the system voltage up (a known problem). It also seems that the car will step into ABS lock-up mode too soon in a panic stop situation; which might also indicate that the brake system is biasing too much power to the rears; too little to the fronts.
I've never had a car wear the rear brakes more rapidly than the fronts; usually the rears are much more lightly utilized to reduce the tendency to skid. Is there any way to adjust brake bias? I'm getting ready to change rear pads and flush brake fluid.
Passat (B7) :: Rear Brake Pads And Rotors Went Shot
So my car has 36 or so thousands miles and well the rear brake pads and rotors were SHOT! The rear rotor was falling apart and huge chunks were coming off. The issue stands now that I can't spread the rear caliper for anything, the ebrake is off too. I tried to use the C-Clamp trick but it honestly didn't even budge. I also opened up the bleeder and master cylinders cap just to cross that off the list when trying to compress. This is the hardest caliper I've ever had the misfortune of dealing with and I fear that the passenger side is not going to be any better. Aside from spending more money or renting the "tool" is there anything else to check because the C-Clamp trick has work on mine and my father trucks calipers.
View 3 RepliesPassat (B5) :: (2003 1.8T) Rear Brake Pads Wearing Out
What's with the rear brake pads wearing out before the front brake pads. Took my '03 Passat in last week to the dealer for the recall and the service dept. guy said my brake pads were worn out. I took the car to my local mechanic who specializes in VW's. Sure enough, rears were almost gone but fronts still had plenty of meat left on them. Of course I had him replace the rears. But I always thought the fronts wore out first. Could this anomaly be due to ABS?
View 11 RepliesPassat (B5) :: 1999 - ABS And Brake Light After Replacement Of Pads And Rotors?
OK, I just got back from having pads and rotors install on my '99 Passat. I was expecting this to clear up the brake and abs light problem but it did not. The brakes still feel mushy and the ABS light still comes on.What should I check? In the brake forum people suggested bleading the brakes, is this the next step? Any quick how to?
View 3 RepliesPassat (B6) :: 2006 - Replaced New Pads But Brake Fault Light Came On?
Put new pads on by 2006 Passat tonight. Disconnected the battery removed the calipers and used a 12 volt battery to retract the pbrake then pushed back the pistons. Buttoned everything up but when I started the car had the park brake fault light and car is now in limp mode (3rd gear only with harsh engagements.
Disconnected the battery again and will let it sit.
Passat (B5) :: Noisy Brake Pads - Moaning Sound When Brakes Applied
Back in April when I was getting my car inspected the mechanic told me I needed new rear brake pads. I knew I did so I let him change them.
Now I get noisy brake pads this moaning sound out of them when I apply the brakes while I'm backing out of a parking spot or my driveway. I've only driven about 5 or 6 hundred miles since then.
Passat (B5) :: Yellow (Front Brake Pads Worn) Light Turning On Then Off
I have about 50,000 miles on my pads, they look 50% gone, but couple days ago I've got short "beep" and light yellow came on(circle with several small parts of larger circle). What and why? Rotors, pads, other?
View 4 RepliesPrius (2004-09) :: 3 Brake Dash Warning Lights Came On After Got New Brake Pads / Rotors
i have the brake (!) the ABS and the VSC lit up after i got new bearings and new brake pads and rotors, the car was also stalling before the mechanic removed these bearing "dust cover" circles that must have been causing speed sensor interfernce bc the spedometer was stuck on 0....so the car seems to be done stalling after those were removed and all the big lights went off then i hit the brakes a few miles later and those three lights came on...
View 2 RepliesLexus IS 2014+ :: Front Brake Pads Touching The Rotors / E-Brake Engaged And In Park
I noticed the front brake pads were touching the rotors when I was painting the brake calipers. I had my e-brake engaged and in park. I'm assuming the e-brake only brakes the rear wheels because the front rotors were still movable. Although the car still rides fine but I'm not sure if this is normal.
View 1 Replies2013 Avalon XLS - Ride Seems Rough And Loud
I'm driving a 2013 Avalon XLS Touring - stock 18 inch wheels and stock Bridgestone tires. Bought it new and today I have 28,400 miles on the odometer. Have had a thumping ride since new and now the ride seems rough and loud. No steering wheel shaking, just a loud rough ride. At first I thought it was flat spots on the tires ... maybe the car had been sitting ... but this dealer seems to have a habit of not bring the tire pressure down to the proper level at delivery. Tires were overinflated at delivery so I'm not sure about the flat spots. I don't do the 5000 miles maintenance. Rather I rotate tires at the 10,000 mile interval with the free oil changes. I've had too many broken wheel studs for rotating too often. Dealer states its BECAUSE I don't rotate enough. I'm thinking its the tires... maybe the belts moved or something else ... maybe just the way the tires ride.
View 1 RepliesCamry :: 2011 SE - Vibration And Rough Ride
I have a 2011 Camry SE with about 25K miles on it. I was pretty happy with my car until I purchased 4 new Michelin Primacy MXV4 tires. Based on overwhelmingly positive reviews, I decided to purchase those Michelin tires. However, as soon as they were put on, the nightmares began.
First, steering wheel started to shake and car felt very wobbly at highway speeds. The ride also felt a lot bumpier and the front of the car (floor, center console, etc) vibrated a lot. I thought, okay, tires probably just needed to be rebalanced. So, I took the car to the shop and had them rebalance the tires. That didn't work, so I took it back again and had 2 other shops attempt to balance them. It got slightly better, but still did the same thing.
Thinking the tires were defective, I had the shop swap them out for 4 new Bridgestone tires. The shaking continued despite having the tires changed but the wobble went away. So, I had them rebalanced 2 more times with the last time being at a shop with the latest Hunter Road Force Touch machine. The mechanic told me he road force balanced it and the machine got it down to 0 with no indication of defective wheel or tires.
After the road force balance, it's gotten a lot better, but I still feel mild shaking/vibration on the steering wheel at speeds > 70 mph on most freeway surfaces (but not all). The floor vibration has also gotten a little better, but remained, and the ride is still bumpy.
I took my car to 2 different dealers and told them the situation. Both of them said nothing was wrong with the suspension or struts, nor were any mounts broken.
Civic - Honda :: 2001 - Car Ride Become Very Rough
I have noticed in the past few weeks that my car ride has become very rough as I go over bumps in the road (which we have a lot of after this winter). It is quite loud and feels like I have lost "support" in the front end (I have limited car knowledge). Could this just be due to old tires (50k miles).
View 3 RepliesGolf V R32 :: Rough Ride - Adjusting Coilovers?
I am adjusting my coilovers this weekend (Bilstein PSS10). Bringing them up a bit as the ride continues to be too rough for a daily driver. Would like to compare the height to stock.
Stock suspension height and wheels, looking for a quick measurement from the ground to the bottom of the fender edge (Across the center of the wheel) for front and rear?.
Prius V :: 2005 - Ride A Little Rough In The Front
My 2005 Prius is riding a little rough in the front. It seems like it might be the drivers side front wheel. I can hear the revolutions of the tire/wheel and I get a slight feeling of those revolutions from the drivers seat. I was thinking warped rotor but I'm no mechanic.
View 1 RepliesSanta Fe (CM - 2007-12) :: Quite Rough Ride / Not Smooth?
I have a 2011 Santa Fe - I have noticed it is quite a rough ride. I guess I am used to the suspension in my Passat, but I still find it is not as smooth as it should be. I thought maybe giving it a bit of time would work, but so far at 25,000km it is still the same. Find it's a bit of a rough ride? Or should I look into it?
View 39 RepliesPrius V :: Ride Is Noisy And Rough - Low Profile Tires
I like most everything about my new v five, except the low profile tires. The ride is noisy and rough, especially compared with the Camry LE we traded and the Tacoma, of course, which we still drive.
View 19 Replies