Mazda - B2200 :: Truck Continues To Roll While Parked And In Gear
My wife is out of town and while she parked her 1997 Mazda B Series pick up truck this morning she stated that her truck continued to roll while parked on a very slight incline. The vehicle was in gear so she put the emergency brake on. Could the clutch be slipping although she said it seemed to be shifting fine. She has to drive back 3 hours over the rolling hills of Nevada and is very concerned that something else could be wrong. What could I have her check besides the clutch fluid?
View 5 RepliesMazda - Protege :: 1994 - Brake Pedal High And Hard And No Response When Depressed
A couple weeks ago the front brakes were done on the Mazda. Then the wheel bearings needed to be done. I think the shop outsourced what I guess was the packing of the bearings. I paid for the work, and drove away, nearly, but didn't because I had no brakes and there I was pulling out into 5:00 PM traffic. The emergency brake saved me. I walked back into the shop and they discovered the power brake booster had broken. I wonder, because if you drove the Mazda to park it in the shop lot where the customers pick up the vehicles after repairs are made, wouldn't you notice that there is no braking action. The brake pedal was high and hard and there was literally no response when I depressed it.
The shop keeper said, darn I guess I'll have to replace this, meaning pay for it, since it (may have) happened when the bearings were being worked on. My question is, is there any reason why working on bearings might end up breaking the brake booster? Chances are, it was just coincidence, right? or? I don't know. Because the car is old, he had to take several days to find the part. Anyway, he sent me off and told me to drive it carefully. The drive home was absolutely nervewracking and required continual tugging up on the emergency brake stick. I wonder if they despise my car so much now that they are sending me off to drive in it in such an unsafe condition. Anyway, hoping it will be fixed tomorrow. But my question still is ... would working on bearings possibly be cause for breaking the brake booster?
Mazda :: Ignition Switch Unresponsive / Shifter Shifts Gear Without Brake Being Depressed
I have a 1998 Mazda Protege LX Automatic, and my ignition switch is completely unresponsive: when on accessory or run position nothing comes on.
I am also noticing that I can switch gears even with the key out and brake pedal not depressed.
I tried to check the function of the ignition switch, and found the following:1) It has one white wire with 3.5v2) When the switch is in Acc position, a black wire with white stripe also has 3.5V on it now3) WHen the switch is in On position, all the wires going into the Switch have 3.5V on them...
Mazda - B2200 :: 1990 - Oil Light Keeps Coming On Despite Repairs?
The oil light came on in my mazda pickup. So the mechanic put in a new oil sending unit, spark plus, wires, distributor. $250. Two days later the oil light came back on. So the mechanic put in new rod bearings, main bearings, oil pump, water pump, timing belt, valve cover basket, and oil filter (and oil, of course). $1300. Two days later, the oil light is BACK ON!! What is going on??
View 7 RepliesSaturn :: 1995 SL Lurch When In 1st Gear, Even Though Clutch Pedal Fully Depressed
When I am stopped (at a red light, for example), the car wants to lurch when in 1st gear, even though I have the clutch pedal fully depressed. I know this is not a problem with the clutch master cylinder leaking by where you lose pressure on the pedal. Car has 245,000 miles and still has original clutch. Car/transmission work fine so long as I put it in neutral when I stop. Doesn't seem to do this w/reverse. Clutch also passes the "stall test" where you let it out in 4th gear with the hand brake on. What's going on here?
View 8 RepliesMazda - B2200 :: How To Get Blower Fan Motor For AC / Heat To Work Consistently
I was wondering if there may perhaps be a more conventional approach to getting the blower fan motor for the AC/Heat in my 1990 Mazda to work consistently - other than whacking it with my hand or foot? Is there an easy fix for this?
View 5 RepliesMazda - B2200 :: 1992 - Missing When Put Strain On The Motor / Going Uphill
I have replaced the water pump,oil pump,timing belt an tensioners, done a head job an now it wants to start missing when you put a strain on the motor[going up hill] but doesn't on level ground.
View 6 RepliesMazda :: 1988 B2200 Engine Pings Shortly After Get In And Drive It When Car Is Warming Up
The engine "pings" shortly after I get in and drive it when the car is warming up. I watch the engine temp rise...and when it starts to get warm just before the thermostat opens and the temp drops the car "ping or pre-detonate" when the accelerator is gently pressed. After the engine warms up... no problems. I drove it from Port Angeles Wa to southern Oregon with out it ever happening... but when I drive a short distance to town it consistently happens. I have checked what I know how to but beyond that it seems odd. Its it normal for the engine temp to rise up warmer than the normal operating temp, and then drop back down? The thermostat was recently replaced. It seems something is creating excess vacuumduring the warmup time that makes the engine ping. All the vacuum gizmos and gadgets make me crazy...
View 1 RepliesPassat (B7) :: Brake Pedal Making Noise When Depressed?
But when I take my foot off the brake pedal , its just seems rather noisy (clunky). As if VW forgot to put some rubber or something to prevent this clunky sound. (it just sounds cheap)
My jetta and tiguan never seemed like this. Have to stick my head under there and see whats up
Lexus GX 2010+ :: Brake Pedal Vibration And Noise When Depressed At Low Speeds
We purchased the vehicle (2013 GX460) in September 2012, and had the car for 6 weeks before my wife was hit by an oncoming car who missed a stop sign. 8 weeks later and 23k of repairable damage to driver fender, front bumper, grille, hood, frame, and all components within those major areas, we received our vehicle.
The vehicle is wonderful and a joy to drive. When the brake pedal is depressed at low speeds (i.e., maneuvering in parking lot, entering driveway), there is a slight vibration to the pedal (similar to the vibration from a cell phone) and a noise that suggests an electric motor is working. The vibration is not like ABS; ABS is a profound vibration. The vibration we experience is very slight. The vibration is not apparent at highway speeds.
I do not recall either the vibration or the noise prior to the accident, and I suspect that this is a result from the accident or from the repairs. I have already brought the GX back to the dealer for this problem and they were quick to dismiss it, but I am really concerned that this is a real problem, and I want the dealer to re-assess.
Accent MC (2006-11) :: Brake Pedal Making Creaking Noise When Depressed
My brake pedal is making a creaking noise when depressed and can also be heard when letting off the pedal. The noise is not coming from the brakes themselves (front/back are like new) but the pedal area or somewhere behind it. This noise doesn't start until I've driven the car for a little while. The brakes work fine for the most part but sometimes feel a bit spongy if making a sudden or hard stop. The fluid levels are fine.
I'm taking it in on Friday and hoping that the brakes just need to be bled a little or maybe the pedal just needs lube, but I'm worried it might be the booster or master cylinder---if it is one of these?
Passat (B7) :: 2014 - Engine Noise / Vibration In Clutch Pedal When Depressed?
I have a 2014 Passat TDI with a 6 speed manual. When the clutch pedal is depressed between upshifts, there is an audible groaning sound and a vibration in the clutch pedal. The dealer replaced the throwout bearing but the problem persisted. They then replaced the entire transmission and the noise/vibration is still there. The noise follows engine RPM. Is this normal for the TDI powertrain? The dealer had never encountered the noise but they did find another car on the lot with the same noise.
View 2 RepliesPrius (2004-09) :: 2006 - Screechy Noise Especially While Accelerating?
I recently bought a 2006 prius used with 100,000 miles and have been hearing a very disconcerning sound coming from underneath the car. It is a screechy noise that is always there, but especially when i accelerate or break going up a hill. I have had it checked out by both a dealership and an independent mechanic neither party has info what it could be, even after hours of troubleshooting, as well as showing then a video in which you can hear this awful sound.
View 4 RepliesMazda - Mazda3 :: 2010 - Makes Noise When Stepped On Clutch Pedal
The noise sounds a little like a baby Road Runner, a soft little "meep" sound. I usually notice it after the car has warmed up, when I come and go from a stop sign. In lieu of strapping somebody to the hood with duct tape, I've been trying to think of a tunnel that I could drive through fairly slowly with the window down while I attempt to replicate the sound.
View 3 RepliesMazda - Protege :: 2001 - Stuck Gas Pedal / Making Noise When Pushed Harder
Lately, when first starting my car and after it’s been sitting for a while the gas pedal seems to be stuck.
When I push on it slightly it doesn’t move; but if I push a little harder it will make a noise and become free and movable. No further problems until it sits for a while or the next morning. Then the same stuck pedal. Exert a little pressure and it frees up.
I tried squirting WD40 on the linkage but it does no good. What could cause it to bind up? 2001 Mazda Protege LX 2.0 ....
Passat (B7) :: Clutch Clicking When The Pedal Is Depressed
2013 tdi 6mt. I am noticing that my clutch clicks when the pedal is depressed. it does not happen when I first start driving in the morning, but it seems that once the cabin is warmed slightly it starts then clicks each and every time. It is annoying and it appears to be related to the different temps outside vs the cabin. I did not notice it during summer or early fall but it is cold here now.
View 24 RepliesPrius (Gen 3) :: ASC / TRAC Light Flashes When Pedal Is Depressed
I just changed the rear rotors and pads on a 2010. Mileage is 145,000, owned since new. It seems the ASC/TRAC light now flashes when pedal is depressed (put car in drive in garage - depress pedal - one beep and light flashes). I had trouble with one of the the caliper pistions, and screwed it all the way out and lost 1/2 teaspoon of brake fluid, so I may have introduced air into the line. Would this cause this? Is there anything unusual about bleeding brakes (as compared to non-regenerative braking cars)?
View 1 RepliesFord F-150 - 1997-2003 :: Won't Start When Hot Unless Gas Pedal Depressed
I have a 1997 f-150 V6 4.2L 2WD. I've been noticing a few symptoms going on and aren't sure if they're related or not. Firstly, I hooked my code reader to the truck and I have P0453 DTC active: Evaporative Emissions Control System Pressure Sensor High Input. As far as symptoms, truck runs overall pretty well. However, if I shut off the truck after running for awhile and then immediate attempt to start it back up, the starter will spin the flywheel but it won't ignite unless I apply pressure to the gas pedal.
Again, this is only when it's hot. I hooked up a fuel pressure gauge to the fuel rail and have 35 psi when running, and seeing as how I don't really have any other fuel-related issues going on (aside from the DTC, which I'm unfamiliar with, so it may be related??), so I don't think it's a fuel pump or anything issue. Maybe an issue with the TPS? I work on diesel trucks so throttle body systems are foreign and strange to me.
Mazda - Mazda6 :: 2006 - Bad Noise And Jerk In 4th Gear
we have an 2006 Mazada 6 automatic transmission with the option of manually shifting gears. we have had it a year and the only maintenance is work on the air conditioner, oil changes, and new tires. when accelerating on an incline or sometimes during/after a curve as it shifts into 4th gear it makes a terrible noise and the whole car jerks. the best way I know to describe it is it feels as if the bottom of the car is about to fall out! when we first purchased it, it done this a couple times and basically quit doing it for a few months.
It seems to be getting worse though. we have never had a check engine light. we sent a can of "sea foam" through the gas tank and this seemed to work. a local mechanic examined it and test drove it but couldn’t find anything wrong with it. (of course it didn’t act like this when he drove it!) I called mazda dealership and they cant tell us anything without us bringing it in and charging us no telling how much just to look at it. no one seems to be able to figure this out….