Lexus GS 2013+ :: Wrapping Front Bumper Mid-section Parking Sensors
So I've seen a lot of people on here wrapping the mid section of the front bumper black to give it a more aggressive look.
For those that have done this, will I need to cut a hole for the sensors or will the sensors still work with the wrap covering them?
Lexus IS 2014+ :: Front Bumper Got Stuck On The Parking Divider And Came Off Partially
So my gf parked at the mall and when she pulled out the front bumper got stuck on the parking divider and came off on the left side. One of the fastening holes appears to be torn and it appears the bumper just needs to be put back in place.
View 8 RepliesLexus IS 2014+ :: Check Engine Light Came On Due To O2 Sensors
I was recently in an accident deemed not my fault, my 250 was in perfect condition otherwise. After the accident when I received my car from the shop, they gave it back to me with the check engine light on and told me it was my O2 sensors. I ran a scan on them and the Bank 1 has low voltage, Bank 2 has high. What could be a cause of both of them to have voltage problems? The mechanics refused to believe the accident had anything to do with it, which is complete BS. I got hit on my passenger side, 11K in damage.
View 1 RepliesCamry 2012+ :: 2014 SE - Front Bumper Chrome Trim Removal
How to remove the chrome trim around the fog lights and the chrome bars beside them I have a 2014 SE
View 2 RepliesLexus IS 2014+ :: Spotted Damaged Bumper
So when I was washing my car for the first time I noticed that the bumper was damaged. It can be fixed or does the bumper need to be replaced?
View 14 RepliesLexus IS 2014+ :: Bumper Removal On 3IS-F Sport?
DIY on removing the bumper on the 3IS-F sport
I just received my fog lights from IJDMtoy, but i have no clue how to remove the bumper!
Ford F-150 (2009-2014) :: Wasted Space At Front End Between Bumper / Grille And Radiator
My rig is a 2013 5.0 extended cab. Seems to me that there is some "wasted space" at the front end between the bumper/grille and the radiator. I'm thinking that some sheet metal/expanded metal work or maybe some fiberglass formed to fit that the space could make a neat storage area for stuff like jumper cables, an emergency road side kit and other stuff.
View 4 RepliesLexus IS 2014+ :: Removing Rear Bumper Reflectors?
Do you need to take off the bumper?
View 2 RepliesLexus IS 2014+ :: Cross Traffic Monitoring System But No Parking Sensors?
How is it possible that the 350 F-Sport can track cars that are possibly coming at you while you're backing up, but it can't alert you to when you're getting close to a wall or other car that is stationary (aka parking senors).. Although I did back into a space yesterday and got no beeps as the car got closer to the other cars in the camera.
Another thing is having radar assist cruise control and no front parking assist... what's up with this craziness? The systems are actually installed in the car, but not able to beep at you?!
Ford Super Duty (1999-2016) :: 2014 F250 - Front Bumper Sagging
I got a 2014 F250 SD w/ 6.7 diesel. Since if owned the truck the front bumper has slowly started to sag at both driver and passenger side. Dealer says there is no adjustments for it.
View 14 RepliesFord Super Duty (1999-2016) :: 2014 Front Bumper Fit On 2001 F350?
Do a 2014 f350 front bumper will fit on a 2001 f350? Wanting to know if the bolt holes and body lines will match up? I put a 2014 rear bumper on and it bolted right up.
View 8 RepliesLexus IS 2014+ :: Removing Rear Bumper To Install Diffuser
Remove rear bumper on IS? Wanting to install a rear diffuser myself but don't know where to start in removing the bumper.
View 5 RepliesLexus IS 2014+ :: Driver Side Won't Seating In Bumper Pocket
Have trouble with the drivers side not seating in the bumper pocket? Mine pops out on one corner weekly. I'm not sure if it would come out completely.
View 14 RepliesLexus IS 2014+ :: OEM Bumper Cover Come With Sensor Holes Pre-drilled?
I'm having the bumper cover replaced on my 350 (stupid mistake on a number of fronts it's starting to look like...) and the indy shop that I chose in my town to do the job (Lexus dealer is 100 miles away and this shop was recommended by the guys that take care of all the Lambos/Ferraris/Porsches etc) told me that they had to drill the holes in the bumper cover to retro fit the sensors. Is this correct?
View 2 RepliesPrius C :: Removing Rear Bumper To Install Back Up Sensors
How to remove the rear bumper, I have to drill some holes to install some back up sensors. I rather not but I don't know if anything is behind there.
View 1 RepliesFord Excursion :: Removal Of Backup Sensors In Rear Bumper?
My Excursion had a mangled rear bumper when I bought it recently. I just bought a salvage one to replace it. I had it installed today. I want to salvage the backup sensors in the old bumper along with the license plate lights. How do these come out? They seem locked in there to me.
View 3 RepliesFord Excursion :: Addition Of Backup Sensors On Chrome Bumper Without Drilling
I'd really like to add these to The Beast, but don't want to drill through chrome. My bumper has some plastic running along the top (see pic). Just looking for info for the same bumper mounted the sensors there with success.
View 9 RepliesLexus LS 2007+ :: Front Bumper A Bit Loose
The front bumper on my L is a bit loose. It looks like there's suppose to be a clip there that may have broke off. What this part is? I'm assuming I have to take the entire bumper off to fix it?
View 7 RepliesLexus RX 2010-15 :: How To Remove Front Bumper
I was hoping there were instructions on how to remove the 2010 RX350 front bumper cover somewhere? We had a little fender-bender, and I was planning on trying to replace some of the items myself. I'm handy, but always prefer instructions over trial/error!
View 6 Replies