Lexus GS 2013+ :: Wrapping Front Bumper Mid-section Parking Sensors
So I've seen a lot of people on here wrapping the mid section of the front bumper black to give it a more aggressive look.
For those that have done this, will I need to cut a hole for the sensors or will the sensors still work with the wrap covering them?
Lexus IS 2014+ :: What Sensors Are In The Front Bumper
What sensors are in the front bumper? I slid out on black ice into a snow bank and it crushed in the bottom grille and as I'm clearing out the snow I noticed a sensor dangling with a broken harness that I was wondering what it was for. I have a nonFsport bumper with LED fog lights and both fog lights are operational.
Drivers side close to the fog lights
Lexus SC430 :: Red Light On Dash Lit - Top Stuck Partially Opened / Closed
Tried to close the top and it stuck. The deck lid is up, top is half- way unfolded, package tray is in up position. The motor acts like it is binding with ever so slight movement when I push the button to raise or lower. The red light on the dash switch is lit (red).
View 14 RepliesAzera HG (2011-16) :: Cup Holder Stuck Partially Open
It appears something has fallen behind the lid to my cup holder, it won't fully open. Not a big fan of the design here, looks like the while center console has to be opened up.
View 1 RepliesCamry 2012+ :: 2014 SE - Front Bumper Chrome Trim Removal
How to remove the chrome trim around the fog lights and the chrome bars beside them I have a 2014 SE
View 2 RepliesLexus RX 2004-09 :: Center Console Cupholder Missing Divider?
Looking for a picture of their center console cup holder? I think there is supposed to be a divider there, but I'm not sure.
View 11 RepliesLexus IS 2014+ :: Spotted Damaged Bumper
So when I was washing my car for the first time I noticed that the bumper was damaged. It can be fixed or does the bumper need to be replaced?
View 14 RepliesLexus IS 2014+ :: Bumper Removal On 3IS-F Sport?
DIY on removing the bumper on the 3IS-F sport
I just received my fog lights from IJDMtoy, but i have no clue how to remove the bumper!
Ford F-150 (2009-2014) :: Wasted Space At Front End Between Bumper / Grille And Radiator
My rig is a 2013 5.0 extended cab. Seems to me that there is some "wasted space" at the front end between the bumper/grille and the radiator. I'm thinking that some sheet metal/expanded metal work or maybe some fiberglass formed to fit that the space could make a neat storage area for stuff like jumper cables, an emergency road side kit and other stuff.
View 4 RepliesLexus IS 2014+ :: Removing Rear Bumper Reflectors?
Do you need to take off the bumper?
View 2 RepliesFord Super Duty (1999-2016) :: 2014 F250 - Front Bumper Sagging
I got a 2014 F250 SD w/ 6.7 diesel. Since if owned the truck the front bumper has slowly started to sag at both driver and passenger side. Dealer says there is no adjustments for it.
View 14 RepliesFord Super Duty (1999-2016) :: 2014 Front Bumper Fit On 2001 F350?
Do a 2014 f350 front bumper will fit on a 2001 f350? Wanting to know if the bolt holes and body lines will match up? I put a 2014 rear bumper on and it bolted right up.
View 8 RepliesLexus IS 2014+ :: Removing Rear Bumper To Install Diffuser
Remove rear bumper on IS? Wanting to install a rear diffuser myself but don't know where to start in removing the bumper.
View 5 RepliesLexus IS 2014+ :: Driver Side Won't Seating In Bumper Pocket
Have trouble with the drivers side not seating in the bumper pocket? Mine pops out on one corner weekly. I'm not sure if it would come out completely.
View 14 RepliesLexus IS 2014+ :: OEM Bumper Cover Come With Sensor Holes Pre-drilled?
I'm having the bumper cover replaced on my 350 (stupid mistake on a number of fronts it's starting to look like...) and the indy shop that I chose in my town to do the job (Lexus dealer is 100 miles away and this shop was recommended by the guys that take care of all the Lambos/Ferraris/Porsches etc) told me that they had to drill the holes in the bumper cover to retro fit the sensors. Is this correct?
View 2 RepliesLexus LS 2007+ :: Front Bumper A Bit Loose
The front bumper on my L is a bit loose. It looks like there's suppose to be a clip there that may have broke off. What this part is? I'm assuming I have to take the entire bumper off to fix it?
View 7 RepliesLexus RX 2010-15 :: How To Remove Front Bumper
I was hoping there were instructions on how to remove the 2010 RX350 front bumper cover somewhere? We had a little fender-bender, and I was planning on trying to replace some of the items myself. I'm handy, but always prefer instructions over trial/error!
View 6 RepliesLexus GS 2006-11 :: Holes On Front Bumper
I bought the car from dealer, there are now FOUR! holes on the front bumper. I don't understand why they couldn't just use the existing holes to put the license plate holder. Now I'm stuck with these holes and I'm looking for a cheap alternative to fill them. I like the clean look of the front end without the plates and don't want to spend a fortune at a body shop, but I also don't want 4 dots either. What I can do/use?
View 3 RepliesLexus GX 2010+ :: Parking Brake Stuck (Remain Applied) After Washing
The closest car wash is less than two miles from our home and we often bring the GX home directly from the car wash and park it in the garage. We've noticed that the parking brake remains applied when we start the GX the next morning, even though the foot pedal releases. Presumably, the parking brake components were wet from the car wash and enough rust/corrosion forms overnight so that the springs to release the brake can't overcome the 'stiction'.
The GX "squats and grunts" when we put it in gear, but doesn't move. Shifting into reverse solves the problem ... there's a loud 'pop' from the rear of the vehicle as the brake releases, the GX starts to move, but in reverse, which we quickly stop with the service brake, then we shift into forward and drive off ... did I mention that we back into our garage?
I may already have confessed that we are heavy parking brake users ... every time we park the vehicle, even if just temporarily while we step out of the vehicle to get the mail, etc. We use the parking brake so much that the cable stretches and every year our dealership has to re-tension.