Sonata NF (2006-10) :: GLS With New Front Brakes And Rotors Still Squealing / Grinding
I took my 2010 Sonata GLS (86K miles) into the shop last Thursday for an alignment and new front brakes since the old ones were on the wear indicators and doing some squealing/squeaking on soft left turns. Got a call from the mechanic who said the rotors were also shot, so I had them replaced as well.
On my normal commute on Monday and Tuesday this week (approx 10 miles, 95% highway), I noticed that when the car was moving at 15mph or less in a straight line both front wheels were making a noticeable high-pitched squeal/squeak, which went away with increased speed and when braking. I figured it might be a break-in issue but when it hadn't improved by yesterday I made an appointment to have the car checked out by the mechanic again today.
Got the car back today and the same sound is still happening, though now it's in the 60mph range and seems to come and go regardless of wheel direction. The mechanic said he took the brakes apart, found no issues but cleaned and lubed everything as a precaution.
I'm starting to wonder if its the bearings that are shot, but the sound hasn't remained constant as I would expect with a bearing issue. All the parts used are under warranty, so the next step I have available here is to have the brakes and rotors replaced.
Lexus IS 2014+ :: Front Brakes Sounded Like Grinding On Something When Speed Reaches Below 15 Mph
I was recently experiencing problems with my front brakes. It sounded like it was grinding on something (it doesn't screech) whenever the speed reaches below 15 mph. I called up my dealer to take a look and upon investigation they told me that i needed to do the front brakes job but they could save the rotor (they charged me around $300). Is this common ? It is a daily driven car and i mostly drive on highways. I drive the 2014 RWD IS-350 F-sport model and just recently hit 17.8K miles.
View 14 RepliesPrius (Gen 3) :: Grinding Noise From Front End When Applied Brakes At U Turn
Coming to a left turn signal I was anticipating it turning red on me, and I drove into the turn lane briskly 30mph and then applied brakes as I made a u-turn. It sounded like a cross between dragging the front air dam and metal on metal brake grinding as I made the turn. Stopped immediately and did not scrap the air dam and all front end components checked out, okay. Car is driving just fine now, has only done this once.
View 18 RepliesMitsubishi - Galant :: 2007 - Loud Grinding Noise From Front Brakes
Driving in snow, braking in this car routinely handles poorly and brakes make a loud grinding sound. It sounds like the front brakes. I just had a brake job from a trusted dealer. I read the thread here on the Honda Accord that reported the same sort of brake problem. The issue is the brakes, NOT tires as that thread suggests. Braking strength is greatly impaired under these conditions. I am very apprehensive about driving in snow, and ready to trade in what is otherwise a fine car.
View 7 RepliesCadillac :: 1950 - Front Right Makes A Grinding Noise While Brakes Applied?
1950 cadillac - standard drums on all 4 corners.
I put new wheel cylinders on each drum, and replaced the drivers front hose, as it was clogged. The passenger side I left because it works and doesnt leak. I've cleaned all the brake surfaces, shoes and drums, and bled everything.
When I brake, and only when I brake, the front right makes a grinding noise and the car pulls to the right.
I tried tightening the star wheel today to bring the shoes inward in hopes that would equalize brake pressure up front, but when trying again today, I got that grinding sound still.
There is no scoring or gouges on the shoes, drum, and the inner and outer ball bearings seem fine - round chrome balls with no discoloration, no gouges on the spindles. Granted I don't drive this far at all, especially now that I have this grinding.
How can I really tell if its the ball bearings? It only makes the grind when I am on the brakes.
Ford Brakes/Suspension :: 2005 - Grinding Noise From Front Intermittently?
Have 2005 excursion. Just did ball joints , wheel bearings all of them, axle joints and seals.Also warn manual hubs. Have a intermittent scraping grinding noise sounds like driver but could be both front.4wd works fine in high or low, no vibration just this annoying noise. took brakes apart and no funny wear or foreign object in dust shield.
View 3 RepliesSonata NF (2006-10) :: Noise Like Grinding Sound When Brakes Applied To Stop
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
Sonata NF (2006-10) :: Grinding Noise From One Of Rear Wheels - Brakes Worn
I heard a grinding noise from one of my rear wheels. After investigating, I saw that the OUTER pad was worn down all the way. I had only driven 15K and it had not been very long so I did not expect this. I also didn't hear the warning tabs as the they are on the inner pad and it had not worn down enough. I checked the caliper slide bolts and they were gliding freely. I checked under the boots and there was still grease in there.
My old pads had only been worn to 30%-50% so I installed those on for now. When I compressed the piston, I had a hard time getting it started and had to apply a bit of force with the C-clamp, but then it compressed without the need for much force. When I put the pads in, it was pretty hard to get them into the clips. the inner one required me to press pretty hard with my hand, the outer one was so tight, I had to use the c clamp to get it all the way up to the rotor.
I'm wondering what the cause may be. Are there some typical causes for why the outer pad may wear faster? I would think if the caliper bolts were stuck, that would do it, but they move freely? could it just be that the pad is too tight on the slider? How might I fix that? I tried filing them down a little but that obviously wasn't enough.
Also, now the pads on the right and left are uneven and the rotor on the right isnt smooth anymore. Should I go ahead and change out the pads and that rotor? Does uneven pads or a rough rotor affect the effectiveness of the brakes significantly? They are the rear brakes so I would think there is less of an impact. I know that uneven pads and a rough rotor will cause them to wear faster, but if I need to replace them anyways, I might as well wait til they wear down more.
Elantra XD (2001-06) :: Brakes Making A Grinding Noise And Thump Sound Coming From Passenger Side Front
So, last week I got my transmission replaced and they also had to replace the CV axle because it was damaged beyond repair when the Transmission self-distructed. They drove it after all the repairs and said it was driving fine, just that it had a belt squeak.
On my way home (30 min drive) about 10 minutes in, still in the city, my brakes start making a grinding noise and sort of a thump thump thump when I brake which sounds like its coming from the passenger side front, it makes me really nervous. It doesn't sound like any brake grindy noise Ive ever heard before and it wasn't making any brake noises before it broke down. (On a side note: it also made a weird noise maybe the first 3 times I drove it after getting it back and I turned the wheel hard to back out of a parking space, that used to be when I heard the belt squeak but I haven't made it squeak since I got the car back.)
Everyone I talked to said it sounded like it needed new pads so tonight I bought new brake pads and rotors for the front and got everything taken apart. The rotors didn't look bad at all, just some light surface scratches, nothing deep, no warping I could see, and the brake pads look almost brand new. I did notice that the inside brake pad on the passenger side was missing its little metal plate that is usually between the caliper and the pad, so I went ahead and replaced all of the brake pads hoping this lost metal plate was the issue.
I also turned the rotor by hand on each side while the brake pads were off and the only difference I could notice was when turning the passenger side one it made a little more noise almost like it was loose.
I got everything put back together and drove around the neighborhood with my boyfriend in the car to listen, the grinding noise was gone and it seemed to brake really well (never got above 30 mph.) However, on my way to return the rotors to advanced auto (45-50 mph) it started making the thump thump thump noise but without the grinding, still on the passenger side. I can feel it in the gas pedal and now it not only happens when I'm braking, but also any time I let my foot off the gas pedal. The only time I dont feel/hear it is when I'm accelerating.
Subaru - Forester :: 2006 - Brakes Inconsistently Making Dragging / Grinding Noise When Coming To A Stop At Low Speeds
I have a 2006 Subaru Forester with 115K miles. It's been well-maintained and well-loved.
For the past few months, the brakes have been inconsistently making a dragging/grinding noise when coming to a stop at low speeds (<5mph). It sounds to be coming from the front half of the car - I can feel it vibrating a little near the driver side. We've taken the car in to be looked at three times - each time, the mechanics think they've heard the noise and report there is absolutely nothing wrong with the brake pads or rotors. Twice they reported a shim was out of alignment. After the last shim adjustment, the noise got a little better - instead of grinding, it's more of a dragging sound now. Because the noise is inconsistent, I haven't been able to crack the formula of the conditions that produce it, other than that it only happens as I'm coming to a stop at very low speeds.
Is there something besides the brakes we should be having inspected? Does this sound safe to drive?
Azera TG (2006-11) :: Heavy Grinding Noise From Front End
I have a 2006 Azera 3.3L. 72000 KMS. I have a heavy grinding noise from front end. Can't tell if left right or both sides. Changes pitch (heavier) as I speed up. Not related to eng RPM, only road speed. Is the heaviest starting at 60km/h to 80km/h then seems to level off. Begins (noticeably) around 15-20 km/h. I believe its bearing noise but have been told can be transmission or brakes. Had it on a lift with wheels off and in drive. There was no noise at slow speed. Appears to be getting worse as the days go by.
View 1 RepliesIS F (2008-2014) :: Grinding Noise Coming From Front Brakes When Slowly Coming To A Stop Below 5 Mph
Just got a 2013 IS-F. Loving this car, but discovered an annoying issue. Grinding noise coming from front brakes when slowly coming to a stop below 5 mph. Is this normal?
View 9 RepliesFord F-150 (2004-2008) :: 2006 - Grinding Noise On Both Sides In Front End
I just bought 2006 f150 4wd . It make a grinding sound on both sides in the front end..it seems to be independent and when I slow and come to a stop, I makes a clanking noise like its locking something in.
View 4 RepliesFord - F150 - F100 :: 2006 - Grinding Noise Coming From Front Left Side
I've got a 2006 f150 4x4 v8 ... I get a grinding noise (I think it is coming from the front left of the truck) that lasts only a little while and only comes out after a cold night (so I only get the noise in the morning after the truck has sat overnight)...
The issue details:
1. The grinding noise is constant and the truck has to be moving for it to make the noise
2. The truck will only make the noise while driving forward, it disappears when I drive in reverse
3. The truck has to sit overnight and it has to be cold (below freezing)
4. I only get the noise if I go in reverse BEFORE I drive forward after the truck sat all night
5. Will not make the noise while in 4x46. It has been doing this for about 2 months
What I tried:
1. Replaced both front wheel hubs
2. Replaced 4x4 vacuum and checked the lines for pressure
3. Front brake pads and checked calipers
4. While the truck was making the noise unplugged the 4x4 vacuum - still made the noise
Lexus GS 2006-11 :: 2008 Metal Grinding Noise In 2nd Gear
I am having several issues. I got the lexus dealership to service my transmission recently. I got it back with a weird smell. It smells like body odor. I had to reach out to hendrick corporate for them to address the problem without charging me. Turns out it was the fluid they used. I could smell the smell from inside if i wasn't recirculating the air. They changed the fluid again and it still smells. Is my transmission doing this because it is too hot?
This smell was never an issue until after the first transmission service. And now I'm hearing a metal grinding sound in 2nd gear past 4600 rpm. It still shifts smooth but 2nd gear might be slipping. Something just doesn't seem right. o yea they gave me my car back with my brakes sticking after stopping in traffic. I took it back and was told my brake pads in the rear lost 2mm in less than 650 miles.
By the way this sound can be heard in 1st but is more prevalent in 2nd. It is not heard in any other gears. And when in sport mode the sound instantly stops when i shift up into 3rd.
Steering - Pontiac - G6 :: 2006 - Rhythmic Metallic Grinding Noise Coming From Driver Side Front End
I've been hearing a rhythmic, metallic ringy grinding noise coming from the driver side front end of the car that seems to be in time with wheel rotation. It happens between 5 and 40mph, worsens while the steering wheel is turned even the slightest to the right, goes away completely during left turns, reduces and becomes intermittent above 45mph, and between 0 and 5mph, as I turn the wheel to the right from any position, I hear squeaking. I recently had the front control arm, ball joints and struts replaced. It has 140k miles. What could it be?
View 4 RepliesLexus GS 2006-11 :: Grinding Or Metal Like Noise On Turning Wheel To Left Or Right
I have a problem! I have only had my 07 gs awd for less than 2 months. I noticed this morning when I turn my wheel all the way to the left or right it makes a grinding or like metal on metal noise. My brakes were done only a year ago, and this noise only happens when I'm turned all the way to the right or left.
View 11 RepliesLexus GS 2013+ :: 2015 - Passenger Side Front Left Wheel Making Grinding Noise
My 2015 Gs 350 F sport started making grinding noise from the front passanger side wheel. The noise comes from driving and not braking so im assuming its not the brake pads and its not squeaking noises as a worn out brake will sound.
View 14 RepliesFord F-150 (2004-2008) :: 2006 - Grinding Or Whirring Noise Coming From Front Passenger Side Wheel
I owned a 99 f250 a little while ago. Just bought a 2006 crewcab F150 xlt about 2 months ago, and for the past month there has been this unusual grinding or whirring like noise coming from the front passenger side wheel.
I took it to the mechanic and he found a bad wheel bearing on drivers side and replaced it but that wasn't the issue. He could hear the noise but wasn't able to figure out what the actual issue was.
The noise only happens when my foot is on the throttle. (not when coasting) and i also just discovered that it doesn't make any noise at all when put in 4x4.