Golf V R32 :: Loud Clunking Noise In Rear Happens Over Bumps
There is a clunking noise coming from the rear of the car. Not a metal on metal sound. Sounds like its more on the passengers side. I replaced the swaybar linkage ends since they were a little loose and thought it was that. Nope...I have H&R coilovers, they are about 5 years old. Can't imagine they be shot this soon. Had someone drive my car while i was behind the R and the rear wheels aren't dancing at all, a common sign of a blown shock. Push down on the car, shocks still respond like they did from day one. I've put the car up on a lift, both sitting and wheels dangling. With the wheels dangling, I grabbed onto the shocks to see if there was any play in the upper shock mounts, solid. Looked under the whole car for loose plastic covers. Can not see anything loose. I made sure everything inside the hatch, including the battery is sitting snug.
The clunk happens over bumps, with or without the brakes on and is loud enough that if the radio is on, it can still be heard.
Golf/GTI VI :: Clunking Noise After Installing Lowering Springs
So I installed the DG springs today, and it should've been a simple install. Well once all was said and done I took it for a test drive. Every time I go over a bump I hear a loud clunking noise, like somethings loose. What it could be? I'm pretty sure I tightened everything.
View 10 RepliesGolf V R32 :: Clunking Noise When Going Over Bumps And Humps In The Road - Sub Frame Bolts?
Do we suffer from this clunking noise as well? I know I have rattles and things that make noise over bumps and humps in the road. But is this what I hear?
[URL] .....
Ford - Explorer :: 2001 - Clunking From Rear Diff When Go Over Bumps
Problem on early 2001 Sport Trac 4X4. I don't have the whining but a clunk when I go over bumps. I jacked up the left side and I can pull the rear wheel in and out maybe a 1/32 and I hear the clunk so I'm sure the loose rear end is the problem. How do I go about fixing it? New/used rear end? Mine is a 2001 (drum rear brakes)...
View 3 RepliesFord F-150 - 1997-2003 :: Clunking From Rear End When Turning Corners With Bumps Only
When I turn over bumps not on corners I hear nothing lol ..I just changed the tie rods for other reasons and nothing is loose in the front end now..But this sound is from the box of the truck like something is in the box bumping around when turning corners over bumps..Its frustrating and I cant find out what it is..Only happens when turning over bumps ?
View 6 RepliesGolf IV R32 :: Rear Sway Make Noise When Go Over Road Bumps
Rear sway bar make noise when you go over bumps in the road?
View 24 RepliesMercedes :: Clunking Noise While Going Over Bumps
I am losing my mind over this. I bought a 2013 c63 in May and the last few months it has been making this clunking noise. I have taken it to the dealership 3 times so far and each time the noise goes away for about a week only to return worse than it was. It used to only make noises when I turned right on incline changes at low speeds. Now it makes the noise going over any bump at any speed.
The first time I took it in they replaced the front left strut. The second time they replaced the front right strut. The third time they replaced the lower control arm.
I am posting 2 videos of the noise. This video is between the first and second visits and the noise can be heard around the 24 second mark.
[URL] ....
This second video was taken today, 2 weeks after my third visit. You can hear the noise continuously throughout the video on any slight bump.
[URL] ....
Golf VI R :: Front Suspension Clunking Over Bumps?
Aside from the clutch and gear changing noise, recently I've been noticing something that sounds almost like a rattle when going over bumps, say a series of filled potholes on a highway where they just slightly bump to move your wheel around, it's not that deep thumping you would expect to hear but it sounds like something is loose in terms of the suspension.
Happens on the front and seems like its coming from both sides. To me it sort of sounds like they forgot to tighten something up when they removed the shipping "blocks"/spacers, but I am not exactly sure what to check. I really do not want to visit the dealership at only 600 miles on the clock ...
Camry :: 2011 SE - Metal Clunking Noise Whenever Go Over Bumps
Have a 2011 SE with just over 21k miles on it.
Problem #1: When ever I go over bumps, go down my drive way, I hear this rather loud noise coming from either the roof or right rear. It sounds like someone is hitting metal with a hammer.
It happens when I'm turning the wheel or just driving straight.
Problem #2: Also when I am going over a speed bump, when the rear of the car goes over it, the suspension gets squeaky. Speeds are about 2-3 mph~
Unfortunately, it is no longer under factory warranty so taking it to the dealer is my last option.
Passat (B5) :: Clunking Noise Every Time When Go Over Bumps And Curb
I got a few questions. First one is how hard would it be to swap the auto trans out for a manual and what would I need. Secondly, have some weird boost issue, boost gauge use to read 5 psi with front mount now its at 2 psi and their are no leaks in the IC system.. can't figure out what it is (turbo only has 3k miles on it) final question what causes a clunking noise every time i go over bumps and curbs?
View 4 RepliesChevrolet - 1500 :: Rattle / Clunking Noise Going Over Bumps
What is causing this noise. When the rear of my truck goes over bumps it makes a rattle/clunking noise but I can't find where it is coming from. Here is a video of the noise. [URL] .....
chevrolet - silverado 1500
Golf IV R32 :: Clunking Sound From Right Front Suspension When Going Over Bumps
I have a clunking noise from the right front suspension when going over bumps. I've replaced the Strut bushings that were collapsed, the control arm bushings that had play and the noise is still there. There is no play in the links. There is a slight noise in the sway bar bushings when struck with a rubber mallet. I hate to keep replacing parts chasing down this noise.
View 9 RepliesGolf IV / Jetta IV :: Clunking Noise In The Rear More Specific On Driver Side
I noticed a clunking noise in the rear of my car (drivers side more specifically). After doing some investigating, I noticed that the bushing in the rear shock absorber is completely shot. It is practically falling out and this is what is causing my noise. My question is, is it possible to be able to just replace the bushing in the shock? If not, I assume I could just replace the rear shocks without having to get a whole new set of coilovers? Can I replace the rear shocks with a different aftermarket brand or do I have to stick with raceland?
View 7 RepliesCamry 2012+ :: Clunking Noise On Hitting Small Bumps
So I was driving home from work today and picked my daughter up from the sitters. When I got back in the car I noticed a "clunking" noise when I would hit small bumps. Trying to figure it out, I also noticed this occur when driving straight and moving the steering wheel back and forth.
The car is a 2012 SE v6 with about 26k on it.
I did install eibach springs about a month ago, but have not had any issues until now. I took both front wheels off and checked anything I would have changed when installing the slings and everything seems okay.
Sonata I45 (YF - 2011+) :: 2013 - Front End Clunking Noise Over Bumps
So about a month ago my 2013 Sonata GLS started to make some clunking noise going over the littlest bumps over the road from the front end on both right and left side.
I brought it to one mechanic and they said the rack and pinion needs replacing which is an expensive fix. I couldn't believe that was the problem as I had no leaks and it was on their solid. I ended up taking it to my uncles mechanic and he stated its the stabilizer links on the front right and front left wheels. My way to work has a lot of bad pot holes... so I'm hoping that the stabilizers are actually the problem.
Anyways, tomorrow I will be bringing it to the mechanic to have them both changed. I know a lot have been complaining about this issue and instead of replacing the rack and pinion, I thought I'd try and see if it actually is the stabilizer links and provide a fix for some of the sonata owners on here.
Mazda - Miata :: 1994 - Clunking Noise From Trunk On Bumps?
I've got a '94 Mazda miata which is in good shape, with among other things a fair number of suspension upgrades. It drives really well, other than the clunk. On the occasional bump it clunks as if something is loose on the driver's side rear. I've checked the shocks, springs, jacked it up and inspected everything I can think of. I'm looking for wisdom from your decades of experience (in your terms wasted time) on what it might be.
View 3 RepliesFord Excursion :: Clunking Noise From The Left Front Going Over Bumps
I need to replace the rubber axle bumper guards. I have a clunking noise from the left front going over bumps. Troubleshooting I found the left front axle bumper guard is missing, right side is missing chunks and dry rotted. I had a question about how they attach. The one that is missing looks like a rusted bolt snapped off. Is it safe to assume a bolt goes right thru the center of the bumper guard into the frame? Couldn't tell on the right side it is in bad shape. Right front bolt may have sheared off on the bottom and just held in on the top by what is left.
View 5 RepliesGolf IV R32 :: Loud Clunking When Going Over Bumps Or Pot Holes At Slow Speed
So i just had installed a brand new set of bilsetin pss9. Going over bumps or pot holes at a slow speed, i get loud clunking out the back. Did not have this prior to the coilovers. Its dropped almost 3/4 of the thread. What this is? Also the shop that installed them, had put them in with out the rear upper spring plate, is that a standard install on these?
View 1 RepliesGolf/GTI VI :: Clunking Sound When Pulling Car Into Driveway Or At Speed Bumps
I had to raise the car a bit to clear the apr turbo outlet pipe. Raised a little too much and was hearing a clunking sound pulling into my driveway or speedbumps, etc. Contacted HR and they said the coilovers have an operating range and to lower them a bit. So.. i have about 3/8" of thread left on both fronts and my (not so scientific measuring method) fender/ground is 24" vs 26.25 stock as measured on a stock gti on my dealer lot. I still have a ton of thread to drop the car (about 1.5") as seen in the picture below. The issue i have is what the spring looks like. It rides fine in my day to day commute so its not noticeable but looking at it, it looks collapsed??
View 13 Replies