Sonata I45 (YF - 2011+) :: 2013 - Front End Clunking Noise Over Bumps
So about a month ago my 2013 Sonata GLS started to make some clunking noise going over the littlest bumps over the road from the front end on both right and left side.
I brought it to one mechanic and they said the rack and pinion needs replacing which is an expensive fix. I couldn't believe that was the problem as I had no leaks and it was on their solid. I ended up taking it to my uncles mechanic and he stated its the stabilizer links on the front right and front left wheels. My way to work has a lot of bad pot holes... so I'm hoping that the stabilizers are actually the problem.
Anyways, tomorrow I will be bringing it to the mechanic to have them both changed. I know a lot have been complaining about this issue and instead of replacing the rack and pinion, I thought I'd try and see if it actually is the stabilizer links and provide a fix for some of the sonata owners on here.
Camry 2012+ :: Clunking Noise On Hitting Small Bumps
So I was driving home from work today and picked my daughter up from the sitters. When I got back in the car I noticed a "clunking" noise when I would hit small bumps. Trying to figure it out, I also noticed this occur when driving straight and moving the steering wheel back and forth.
The car is a 2012 SE v6 with about 26k on it.
I did install eibach springs about a month ago, but have not had any issues until now. I took both front wheels off and checked anything I would have changed when installing the slings and everything seems okay.
Camry :: 2009 LE - Clunking When Hit Bumps
Alright I've got an 09 camry le on 18's, I recently just put the tein s tech springs on and since day one it clunks when I hit bumps. I did the install myself (not bad, just time consuming), so no taking it back to someone. I've taken the wheels off and made sure the bolts are all tight and the top mount too. Everything is snug. Still clunks. Is this just something that is normal with aftermarket springs on stock suspension?
View 14 RepliesPrius C :: Heavy Metal Clunking Noise After Car Shut Off
We've been happy owners of a 2012 Prius C for about 9 months now. We've recently noticed some type of heavy metal clunking, like something in the engine compartment fell off. This is happening at least 3 times a week and happens at stop lights or even, most recently 3-5 minutes after the car has been shut off. We plan on taking it to the dealer this weekend to check, but know that it will be impossible for them to replicate the noise as it isn't a persistent issue.
View 4 RepliesGolf V R32 :: Clunking / Metal On Metal Grinding Sound
This morning on my way to work, pulling into the parking lot around 20mph. I hear a metal on metal grinding noise. (almost to the sound of a muffler dragging on the ground type noise). Then that disappears for a bit, hear a loud metal clunk then some high pitched sound. All within say 30 seconds. Definitely coming from the back, but can not tell from which side.
Things I've checked in the parking lot:
Nothing hanging low, exhaust seems in-tact
It doesn't look like the brake shields behind the rotors are bent or touching
Sounds still happening if on or off brakes , on or off throttle.
It seemed to happen only at lower speeds. Disappeared once I got up to 50mph
Just took it out for a drive, that loud metal clunk happened when I put it into reverse, drove around, no other sounds. I just don't have a warm fuzzy feeling that this will just disappear.
Prius (2004-09) :: Metal Rattling Noise From Brakes Right Front When Going Over Bumps
I'm pretty sure I know what the problem is since when I hit the brakes it stops. When I took the left side tire off and right side I compared and there is a thin metal sheet that has room to move on the right, but is tight on the left. When the brakes were done before maybe it didn't seat correctly or something. Just wondering what that plate is called so I can order one and change it. Driven that way 2 years, but it bugs me when the window is down and people probably think my car is falling apart. Maybe I'll search for a brake diagram.
Edit: I think they might be called "anti squeal shims". I saw a picture of them, so maybe they didn't put enough high temp grease, but the left side is tight and the rights side you can move a couple milometers side to side so I'm sure that's the jingling noise.
Passat (B5) :: Metal Clunking Noise Right Before Coming To A Complete Stop
I have this horrible metal clunking noise coming off of my front end. I just had new brakes put on the car and the mechanic said everything looked good around the assembly. But now when I am approaching to stop, right as I apply a bit more pressure to the brakes before stopping, I get a soft clunk inside the car... but I feel it through the pedal. When the windows are down and I am going slow enough, I can hear it clink (clink, not clunk). It's a very metal on metal sound.... I thought of my control arms, however there is no sound what-so-ever when I steer left to right....
View 4 RepliesMercedes :: Clunking Noise While Going Over Bumps
I am losing my mind over this. I bought a 2013 c63 in May and the last few months it has been making this clunking noise. I have taken it to the dealership 3 times so far and each time the noise goes away for about a week only to return worse than it was. It used to only make noises when I turned right on incline changes at low speeds. Now it makes the noise going over any bump at any speed.
The first time I took it in they replaced the front left strut. The second time they replaced the front right strut. The third time they replaced the lower control arm.
I am posting 2 videos of the noise. This video is between the first and second visits and the noise can be heard around the 24 second mark.
[URL] ....
This second video was taken today, 2 weeks after my third visit. You can hear the noise continuously throughout the video on any slight bump.
[URL] ....
Passat (B5) :: Clunking Noise Every Time When Go Over Bumps And Curb
I got a few questions. First one is how hard would it be to swap the auto trans out for a manual and what would I need. Secondly, have some weird boost issue, boost gauge use to read 5 psi with front mount now its at 2 psi and their are no leaks in the IC system.. can't figure out what it is (turbo only has 3k miles on it) final question what causes a clunking noise every time i go over bumps and curbs?
View 4 RepliesChevrolet - 1500 :: Rattle / Clunking Noise Going Over Bumps
What is causing this noise. When the rear of my truck goes over bumps it makes a rattle/clunking noise but I can't find where it is coming from. Here is a video of the noise. [URL] .....
chevrolet - silverado 1500
Golf V R32 :: Loud Clunking Noise In Rear Happens Over Bumps
There is a clunking noise coming from the rear of the car. Not a metal on metal sound. Sounds like its more on the passengers side. I replaced the swaybar linkage ends since they were a little loose and thought it was that. Nope...I have H&R coilovers, they are about 5 years old. Can't imagine they be shot this soon. Had someone drive my car while i was behind the R and the rear wheels aren't dancing at all, a common sign of a blown shock. Push down on the car, shocks still respond like they did from day one. I've put the car up on a lift, both sitting and wheels dangling. With the wheels dangling, I grabbed onto the shocks to see if there was any play in the upper shock mounts, solid. Looked under the whole car for loose plastic covers. Can not see anything loose. I made sure everything inside the hatch, including the battery is sitting snug.
The clunk happens over bumps, with or without the brakes on and is loud enough that if the radio is on, it can still be heard.
Golf IV R32 :: Bad Clunking Noise When Going Over Bumps - Rear Springs Collapsed?
I am experiencing a bad clunking noise when going over bumps. Its comming from the passenger rear and I am assuming the springs collapsed. How can i tell for sure? The car is sitting a little lower on the corner. Is it bad to drive the car with the spring in this condition?
View 8 RepliesMazda - Miata :: 1994 - Clunking Noise From Trunk On Bumps?
I've got a '94 Mazda miata which is in good shape, with among other things a fair number of suspension upgrades. It drives really well, other than the clunk. On the occasional bump it clunks as if something is loose on the driver's side rear. I've checked the shocks, springs, jacked it up and inspected everything I can think of. I'm looking for wisdom from your decades of experience (in your terms wasted time) on what it might be.
View 3 RepliesFord Excursion :: Clunking Noise From The Left Front Going Over Bumps
I need to replace the rubber axle bumper guards. I have a clunking noise from the left front going over bumps. Troubleshooting I found the left front axle bumper guard is missing, right side is missing chunks and dry rotted. I had a question about how they attach. The one that is missing looks like a rusted bolt snapped off. Is it safe to assume a bolt goes right thru the center of the bumper guard into the frame? Couldn't tell on the right side it is in bad shape. Right front bolt may have sheared off on the bottom and just held in on the top by what is left.
View 5 RepliesToyota - Corolla :: 1995 - Clunking Noise When Drive Over Bumps Or Dips
When I drive over bumps or dips my car makes this clunking noise in the front passenger side. I just had the front brake assembly replaced as well as the engine mounts but the noise is still occurring. what could this be and would it affect my new brakes in any way?
View 6 RepliesElantra XD (2001-06) :: Crunching / Clunking Noise When Go Over Bumps - Upper Control Arm
I have a 2001 Elantra GLS. After reading info on the forums it sounds like my crunching/clunking noise when I go over bumps would most likely be the upper control arm. Is this the only control arm?
View 6 RepliesGolf V R32 :: Clunking Noise When Going Over Bumps And Humps In The Road - Sub Frame Bolts?
Do we suffer from this clunking noise as well? I know I have rattles and things that make noise over bumps and humps in the road. But is this what I hear?
[URL] .....
Ford F-150 (2009-2014) :: 2011 - Grinding And Metal-on-metal Contact In Front
I replace my brake pads and rotors in the fall of 2015 with EBC parts. Now almost 13,000 miles later, I started hearing grinding and metal-on-metal contact in the front. So I went out and got PowerStop pads to replace the EBC (EBC had way too much brake dust). I took off the front wheels and noticed that the DF pads had about 1/32 left on them, ok I guess its time to change them out. Onto the PF pads, I find that there is almost no material left, in fact I could scrap off what was left of the material. I decided to do a rotation while I am at it and noticed that the rear brake pads on both sides look like I never used them!! Is it really that possible to have 2 stuck calipers, both on the rear at the same time?
View 2 RepliesSonata I45 (YF - 2011+) :: Metal On Metal Sound When Approach Stop Sign
My 2011 2.4l Sonata made a metal on metal sound suddenly the other day. About 4 days ago, I drove about 2 hours away from where I live, Mostly highway, about 80mph to a go kart race. Got out of the car for a while and came back in and was pulling away to run the store and as i started to approach the first stop sign maybe 500-600 ft from where i was parked, i heard a bad metal on metal sound, came to a complete stop at the sign and it stopped. Went back to the race after driving to the store about 5 miles away.
Got in the car to leave and same thing, just to the stop sign 500-600ft away. Drove home like i said mostly highway, and didn't hear a thing. Today, about 4 days later, I drove to Chicago O'hare airport, about 30min away, and it was fine the whole way there. However on the way back, after about 20-25min, I heard it again. So I came to complete stop as I was forced to by a traffic light as I was taking my exit off the highway, and It started making that sound again. So i came to a complete stop at the light and started moving again when it turned green and couldn't heard a thing.