Golf/GTI VI :: Getting Bulb Out Error?
I had HID's installed in my fogs (before haters jump in, it doesn't look remotely bad, and they're aimed down, so no glare), and I'm getting a bulb out error. I have a VAG, but I'm not seeing any long coding to disable error checking for the fogs. I have the error cancelling add on, but we forgot to install. Just curious if there's a VAG trick to disable that error before I rip the fogs out again.
View 1 RepliesGolf/GTI VI :: 2012 - How To Get Rid Of Bulb Out Error
I got black side markers for my car and put on the bulbs the side markers came with... I like the look but I got the bulb out error.. Wanna keep these bulbs but the error code annoys me .. Need to know the vag-com code to get rid of this? I searched but I can't find it.. I have a 2012 GTI .
View 11 RepliesGolf V R32 :: After Installing Lights Getting Bulb Out Error Message?
I installed the lights and they work fine but everytime I turn them on they throw a bulb out error message. I have the cold diagnosis turned off for the fogs and I still have it. Whats next?
Here is my coding. F78F8F2700041500470F0000000000000018110B5C00010000 0000000000
Golf/GTI VI :: License Plate Bulb Out Error With Stock Bulbs?
I have an intermittent error that comes on most of the time I have my headlights on, but sometimes goes off and comes back while I am driving. It shows me the bulb out light, and says on the screen "Number plate Check license plate lighting!" I have never touched the oem factory bulbs on the license plates, and if i get out and look at the plate, both lights are on over the plate.
The only change I have made was about a year ago, I installed an LED bulb in the trunk, and ran a second OEM trunk light in the left side and installed an LED bulb in that too, tee'd off the factory trunk light housing. But like I said, that was 1 year and 30,000 miles ago, and my bulb our error for the license plate has only just started, so I doubt they are related.
Golf VI R :: Engine Error Codes - Random / Multiple Cylinder Misfire Detected
I recently found these codes. My car is APR 1+. The car seems to run fine so I'm not sure what is going on. I changed the plugs at ~60K miles and now have 72K miles.
Address 01: Engine (CRZ) Labels: 06F-907-115-CDL.clb
Part No SW: 5K0 907 115 M HW: 8P0 907 115 B
Component: 2.0l R4/4V TFSI 0020
Revision: 5BH20--- Serial number:
Coding: 0403010A180F0160
[Code] ....
Tiguan :: 2009 - Bi-xenon Bulb Went Out / Error Codes
My driver side bi-xenon bulb was out, so I go to replace the bulb and it still doesn't turn on. I scanned my car with my vagcom, and I get this error.
Address 09: Cent. Elect. Labels: 3C0-937-049-30-H.lbl
Part No SW: 3C8 937 049 E HW: 3C8 937 049 E
Component: Bordnetz-SG H54 2602
Revision: 00H54000 Serial number: 00000008706034
Coding: E78C8FA300041C004719000014000000002AF7475C40012539 0000000000
[Code] .....
Grand AM :: 2000 2.4L SE - Random Misfire Error Code And Catalytic Converter Gets Hot
That Car Grand AM 2000 2.4L SE
The current problem with the car is that it is not accelerating fast, for example i would push the petal to the metal and only go 25 mph and my RPM would be 3000-4000. Initial my brother and cousin though it was the Catalytic converter because it was getting hot but that has recently been change along with the fuel filter and spark plugs. but the catalytic converter is still gets red hot so i forbid myself from driving it till i fix what every causing the slow acceleration and the temperature of the Cata when i took the error code think P0300 random misfire to the local Autozone they printed me a long list of things that could be a issue my question is what is the likely culprit so i can fix those 1st before shelling out cash to rebuild a engine. may just have to get rid of it at that point. so i guess what am asking is a list maybe top 10 so i can fix them one by one as my money comes in.
Before the accelerating issue the car would randomly stop when i slowed down or stooped that when i replace the spark plugs.
Passat (B5) :: Error Code 16684 And 16686 - Random / Multiple Cylinder Misfire
I was driving along and the engine started missing really bad. The whole car was bouncing around. At first I thought I had a flat, but when I stopped I noticed it was the engine. I checked the error codes and got 16684 and 16686 --- Random/Multiple Cylinder Misfire.
I had a problem recently with the vacuum hose broken and was causing an error code. Replace the hoses and it has been fine. Checked to make sure that the hoses were secure and they are fine. Doesn't seem to me to be related. So many problems for a car with 57,500 miles
Lexus ES 2007-12 :: Random / Multiple Cylinder Misfire Detected - Error Codes On ES350
So on monday the following error codes appeared on my car. What needs to be replaced off the error codes?
P0300Random/Multiple Cylinder Misfire Detected2014-02-04 13:48:29
P0301Cylinder 1 Misfire Detected2014-02-04 13:48:29
P2030No Description Available2014-02-04 13:48:29
P3030No Description Available2014-02-04 13:48:29
C0033No Description Available2014-02-04 13:48:29
P0603Internal Control Module Keep Alive Memory (KAM) Error2014-02-04 13:48:29
C1400No Description Available2014-02-04 13:48:29
Ford Ranger / B-Series :: 1999 B4000 - Random Stalls / P0171 And P0174 Error Codes Come Up
I have a 1999 B4000 V6 4.0L with 78K miles on it. I recently had P0171 and P0174 error codes come up. I replaced the MAF sensor and have not had the codes return but now the truck will basically stalls out when sitting at a stop light. It does not do it all the time just randomly. It has never done it when engine is cool but only once up to temp. The idle is smooth at cold engine but begins to get rougher once warmed up (nothing too bad just noticeable). I cleaned the IAC with MAF cleaner but no joy. I reseated all plug cables at the coil but no change. RPM around 600-700 then fluctuates up a bit then truck will stall quickly( I usually cannot put other foot on gas in time to get it to increase RPM before it dies)....
View 5 RepliesGolf/GTI VI :: Changing Fog Light Bulb With LED?
I want to change out my fog light bulbs on my MK6 Golf TDI. does this will set off any E-Codes or can I just plug and play?
View 5 RepliesGolf/GTI VI :: Cannot Get Led Bulb Out Warning Light To Go Off
I have read all 11 pages of the led light post, and I am more confused then when I started. I bought Ed's opt.4 lights with the LED's. I bought the light kit he recommended: [URL] .... with H7 harness. I have 2012 North American TDI Golf. I purchased and had installed the Bold eruo light switch with light sensor kit. I had someone install everything for me. They have had trouble finding out the proper codes needed. The issues I am having are:
1: with the above set up, they can not get the light bulb out warning light to go out. I was told that it is due to the light kit purchased above, and the fact that it only connects to the drivers side harness, and not the passenger side, so the warning light on my car keeps saying there is a bulb out on the right side.
2: With the euro switch in the Auto position, I get no DRL's at all. The only way I get that is if I turn the switch to the next position, and then I get the low beams, as well as the LED's, and no fogs. This stays the same day or night with the light switch in this position. To get the fogs as well, I turn the knob one more turn, and pull it out, and this gives me the fogs as well as the low beams and LED's.
My questions are:
1: can I get the LED's as DRL's in the Auto position or in the position next to it, and then have the rest of the lights come on automatically at night via the sensor? If so, what are the vagcom codes I would need?
2: Is there anyway to get the bulb out warning light to go away without putting in a different light kit. I was told by the installer that they had to try a few light kits to get one to work with the coding of the vw, and the kit they use connects with two harnesses(one for each head light, and not one harness for both as my set up is).
Golf V R32 :: How To Get Rid Of Bulb Out Warning After LED Install
I recently installed the LED euro tail lights with out swapping pins, or any ghetto harnesses. i simply installed my tail lights with the oem harness. Anyways, after i installed the lights, the bulb out warning came on, i got rid of it, but when i press the brakes it triggers the warning light to appear after i vagcomed it to go away. so what is the coding to get rid of it?
View 2 RepliesGolf V R32 :: Headlight Bulb Burned Out
One of my headlights burned out.
I was looking at ECS and saw ES#1059.
Just want to make sure that this is the right bulb.
Golf IV R32 :: Low Beam Bulb Replacement?
I've been searching around and have been reading that the easiest way to do it is to remove the front bumper. I'm really hoping this is not the case. I've only taken a quick look at it, but it does seem that some things will need removed. Any quick explanation of the easiest way to get the assembly out of there?
View 4 RepliesGolf V R32 :: Tail Lights Bulb Out Warning
So, I'm not entirely sure if this has been covered, but I dealt with the bulb out warning with the LED tail lights. I am not running the fourth wire. I had tried searching for a while but found no answers. Most conversation about this issue are buried in old threads.
The usual DIY disclaimer applies. In the Central Electrics module (09), access Coding, then Long Coding. You will need to make sure that Byte 19, Bit 3 is checked (Diagnosis Rear Parking Lights Active).
Here is my current coding:
E68D8B6700041500470A0000F000000000918095C000100000 000000000
I have verified all operations (parking lights, brake lights, turn signals [amber]) and no flickering as well.
Golf IV R32 :: Bulb Have A Spark Effect When Powered On
So I have had the Helix projectors for a while now and i have really liked them up until recently. When i pulled the headlights to install my DDM drop ins i noticed that the wiring looks cheap as hell. and the cutoff inside the projector looks like doodoo.
I So my HID decided to go out... damn second set of bulbs in a week, I swapped the ballasts just to see if it was the same issue and it seems to be not the ballast. Im starting to think that the wiring is just very poor inside these particular headlights.
My real question is even though the DDm Drop ins are like 50-60 bucks...The bulb would have a "spark effect" when u powered them on. They did this for about 20 min when i was messing with them and then went out. Then the lights magically came back in in the middle of driving up the interstate.
Golf V R32 :: Driver Side Headlight Bulb Went Out?
My drivers side headlight bulb went out a few days ago and I haven't had the time to get a replacement. Any DIY's or tips for changing them out.
View 8 RepliesGolf/GTI VI :: Bulb Size For Fog / Driving Light For MK6?
What is the size bulb for the Fog light. I search but nothing come up.
View 2 Replies