Ford 7.3L Power Stroke (1999-2003) :: Code P0670 - GPCM Glow Plug Control Module Control Line Failure
How to fix SES P0670?? I understand there's a whole procedure on checking fault.
P0670:GPCM Glow plug control module control line failure. Open/grounded circuit, open/shorted GPCM, failed PCM
But how did you resolve problem? replaced GPCM, found open circuit, short --if so where?-- or replaced with updated harness.
(4C3Z-12B568-AA connector upgrade kit as in picture)???
Golf IV R32 :: Fault Code P0606 - Powertrain / Engine Control Module?
The code the R threw was p0606 which is the Powertrain/ Engine control module? Where these components are in my R? Or how I can go about trouble shooting this problem?
View 9 RepliesPhaeton :: TPMS Control Module Stopped Working After Reset
My TPMS control module stop,working after resetting it.. Is there a way to fix it or do I need to buy a new unit.
View 2 RepliesFord 6.7L Power Stroke Diesel :: 2012 - Code P061A / Internal Control Module Torque Performance
I have a 2012 6.7 with a Spartan tuner. Threw this code a few months ago. Reset everything, trucks runs great, no issues. Never had this code come up again. I've looked it up and it says, "Internal Control Module Torque Performance". I'm just not sure what this means.
View 2 RepliesPrius (Gen 2) :: Control Module Communication Bus Off - Code U0073
This is a 2008 Prius with no check engine light or other operational issues. The car runs fine. When doing a health check with a Techstream scanner (new toy), it shows the code U0073 along with U0123, 124, 126, and 293. Need to further diagnose what may be wrong?
View 7 RepliesTouareg :: Airbag Fault Code / ABS Control Module
I recently received an airbag fault light so I figured that I would scan the module for error codes. This is what I came up with:
Control Module Part Number: 3D0 909 601 C
Component and/or Version: 05 Airbag 8.4E++H01 0352
Software Coding: 0012341
Work Shop Code: WSC 31414
Additional Info: 7L0959339B BF-Gewichtsens. 005 0006
Additional Info: Geraet 00000
2 Faults Found:
01217 - Side Airbag Igniter: Driver Side (N199)
001 - Upper Limit Exceeded - Intermittent
01316 - ABS Control Module
004 - No Signal/Communication - Intermittent
Has scanned the car while had the airbag fault present and if so, is this the usual harness that needs to be changed?
Passat (B6) :: 2008 - Steering Wheel Control Module Blown?
I have the below multi-function steering wheel installed on my 2008 Passat. The steering wheel came out of a 2010 CC and the buttons do not currently work.
Which steering wheel control module would I need and what is the price on that?
Besides the steering wheel control module and programming via VCDS/VAGCOM, do I need anything else for this to work?
Tiguan :: 2011 - Difference Between Clockspring And Steering Control Module For Retrofit?
I see these 2 terms almost interchanged. I understand they have different functions. Clockspring is power to airbag and control module connects to, in my case, the CAN-BUS that actually sends the signals. Am I correct in my thinking here? I have just about put all the pieces together for my MK6 MFSW retrofit and still wondering if I'll need a new clockspring or not.
2011 Tiguan S -> 2011 Tiguan S with GTI MFSW
Golf IV / Jetta IV :: Lost All Power Steering - Should Replace Pump?
I've lost all power steering about a week ago. I checked all the lines the return is bring fluid up from the pump and the res is flowing into the pump.
A) should I replace pump?
B) look into other things that could be causing the issue?
Passat (B7) :: Fault Code 03252 - Engine Control Module For HV Drive
I have a 2013 VW Passat TDI SE DSG and I was trying to do some tweaks. I found this fault code yesterday and cleared it. I scanned it again this morning and it popped up again. I searched and did not foud anything. No check engine light.
Saturday,16,November,2013,10:32:21:13221
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: Release 12.12.0 (x64)
Data version: 20130910
[Code] ....
Passat (B5) :: ABS Fault Codes - Transmission Control Module / Steering Angle Sensor
I have just replaced the abs ecu and have cleared the codes, thought all was gonna be good but now two code are still coming up they are:
01044 Transmission control module - incorrectly coded
00778 Steering angle sensor-G85
Ford F-150 (2004-2008) :: Engine Code P0607 - Control Module Performance?
What could cause code P0607 - Control Module Performance?
Truck seems to be driving fine (except it just recently developed what I think is either the cam phaser tick or an exhaust manifold leak on the passenger side).
I haven't tried clearing the code to see if it comes back. This is on a 2006 F150 FX4 with the 5.4L...
Ford Excursion :: Code P0683 - Glow Plug Control Module To PCM Comm Circuit
I have a 2002 7.3L and keep throwing a P0683 code (Glow Plug control module to PCm comm circuit). I have looked though all the Forum posts I could and it looks like the GPR, or the GPCM, or harness are at fault. I know my truck has the GPCM ... does it also have a GPR? I am not getting ANY individual GP failure codes, but the damn thing is having a hell of a time starting in the cold.
1) How do I determine if the GPCM is bad?
2) If I have a bad ground?
3) Bad connector to GPCM connection?
4) If something is wrong with the wiring harness itself
Last night I unplugged the harness from the GPCM, cleaned the connectors, added di-electric grease to improve the connections .. made no difference.
Golf/GTI VI :: 2010 - Airbag Control Module Coding
Need coding info for 2010 Jetta sedan 2.5 Air bag control module. The part # is 1K0 909 605 AD/004, Component # Airbag VW8R 036 8900. I am using a Vag-Com version 10.6 ....
View 1 RepliesFord F-150 - 1997-2003 :: PAT Module Communicates Wirelessly To Key Module Under Steering Column
Took my 99 XLT super cab to a Ford dealer to have a new key made (I have only one so can't do it myself). I was told the PAT (Passive Anti-Theft) module wouldn't communicate with their system.....
As I understand it, the PAT module communicates wirelessly to the key module under the steering column. Since the PAT module is obviously working (the truck cranks, starts and runs fine). What are they talking about?
Golf VI R :: No Signal From Transmission Control Module After Installing HPA Comp Controller
Installed a used comp controller and now vag-com is giving me the a code:
1 Fault Found
01315 - Transmission Control Module
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 4
Fault Frequency: 1
Reset Counter: 138
Mileage: 69085 km
Time Indication: 0
I have taken it off and put it back on, I have cleared that code and re-scanned and still receive it. Have not driven car to see what it feels like as of yet.
Golf IV / Jetta IV :: Battery Dying Repeatedly - Comfort Control Module Failure?
Battery kept dying. Had the battery tested. Bench tested as OK but kept dying. Replaced the battery with a new OEM. In a week, that battery was dying too. Alternator was putting out 13V but would dip down to 11V. Also did a parasitic current draw test. Car is only drawing 20mA at rest. Replaced the alternator with brand new. New alternator putting out 14.4V. Battery keeps dying. Still no parasitic current draw.
I did two things right around the same time I started having the issue. I put in a new head unit. I already had an aftermarket head unit and I simply upgraded. I know this isn't the issue because I ripped the thing out completely, including wiring harness, and I still kept having a problem. The other change I made was going from a MFSW to a 3-spoke. I removed the MFSW relay and switched the pins in the column so that the horn and airbag work properly. I tried the cruise control and it doesn't work. When I try to turn on the cruise control, it blows the horn fuse. Replaced the horn fuse and I just don't use the cruise.
What I'm wondering is if I messed up the CCM when I did the steering wheel swap. I've read that bad CCMs can kill batteries. I'm not having the typical faulty CCM issues. The only issues, besides the battery dying, are that the unlock on the keyfob will stop working at random, and the "door ajar" light on my dash flickers at random.
Ford 6.7L Power Stroke Diesel :: Fuse For Transmission Control Module Started Blowing
I have a fleet of F250s and 350s through my business. I have recently been having problems with a f250 2015 6.7. It has approximately 110k miles and a new transmission was put it about 12,000 miles ago. Since then we haven't had a problem until now. Recently (2 days ago) it started blowing a fuse, #46 (transmission control moduler) and lighting the entire dashboard up like a Xmas tree.
Check engine light, maintenance required, hill descent, etc. However it is completely random when it does this. It has happened a total of 11 times in 2 days. 6 times in a row yesterday then didn't do it until late this evening 5 times in a row. It will get parked, turn it off, try turning it back on and the fuse is blown, replace it same thing... then will eventually start.
Ford 7.3L Power Stroke (1999-2003) :: Glow Plug Control Module Function?
OK, what does a glow plug control module do? The short bus I got has one on it. It looks like it fits right into the circuit without much, if any, modification. I got one with my short bus and am curious if it would be something worth adding to my pickup. So...what does it do and could I/should I install it?
View 4 Replies