Ford F-150 (2004-2008) :: Vibration In The Brake Pedal When Stopping Or At A Dead Stop
In my 2008 F150 with 108,000 miles, I am having a vibration in the brake pedal. When I am stopping or at a dead stop. I first thought it might be the rotors needing to be turned, but the vibration seems to go away when I turn off the a/c.
View 11 RepliesFord 7.3L Power Stroke (1999-2003) :: Truck Would Just Die From A Dead Stop / Push The Pedal And No Go
I am pretty sure my pedal is going.. Today and last month it would just die from a dead stop push the pedal and no go, but truck idling fine. I cleaned it off a few weeks ago but now its back. push pedal in and out a few times and all is fine for a few weeks. Truck runs fine other than that. Does not throw a code, just trans light comes on because no movement I think, then it goes off as soon as i start to move along. I have a adjustable pedal assembly 2c3z-9f836-de 508.45 at white bear lake ford.
View 1 RepliesGolf V R32 :: Car Tends To Jitter During Takeoff From Dead Stop
I have purchased number 4024, in CW, and I am posting to ask about the transmission. During take off from a dead stop, the car tends to jitter. Not a fast repetitive jitter, more like a slow, stalling out feeling. a go stop go stop go stop go that blends in to each perspective motion. Now when I purchased the car, it had already been modified by member CWR32. The mods included GIAC software, intake, exhaust as well as suspension, bar, skid plate and all of that good jazz.
What I am trying to figure out is if any of your cars do or has done the same, either stock or modified. I have read something stating that the software controlling transmissions such as DSG determines how smooth the transition of gears will be. Is it possible that the tranny software was upgraded, is this tranny REALLY that clunky, does yours tend to do the same.
There is also a slight tendency for the car to jar roughly when put into reverse or first if i let off the brake quickly.
Golf/GTI VI :: Clunk Sound On Take Off / Reverse From A Dead Stop
The car is manual, 95.000 KM. The problem is everytime i put the car in gear and start rolling, I hear a loud thump/clunk coming from the underside of the engine.
The only mods on the car are intake, a tune and a dog bone insert. The clanking is way more apparent when i'm in reverse. Whether i'm backing out of my uphill driveway or on a flat surface, EVERYTIME the car is at a dead stop and I give it throttle, something clanks...
My mechanic had lifted the car. He thought it might have been suspension, but he ruled that out. He believes that it is in fact the dog bone insert that is faulty. Upon further inspection, the red insert (from USP I believe) had cracked. although the insert was visibly broken (I've had it for barely 5000 km's, WTF) I'm not entirely sure that that is what's making the clunking sound because that sound was there from before I had put the dog bone insert in place.
Golf V R32 :: No Smooth Transition Into 1st Gear From Dead Stop
From a dead stop it takes a second to go and isn't super smooth, slightly jerky. Seems fine for all other gears, just from dead stop it isn't a smooth transition into 1st gear. Is this typical of DSG or no?
View 8 RepliesGolf V R32 :: Transmission Jerky - Clutch Slipping When Start Going From Dead Stop
So I took my car in for the recall last night and also told my service advisor that my transmission has been a bit jerky lately. Kind of felt like the clutch was slipping when you start going from dead stop, and clunk here, clunk there.
After their diagnostics it seems to be the Mechatronics unit, apparently about 50% of our cars had the issue. The part would have to be ordered from VW due to it being made per VIN and is on back order. They didn't have the reacall parts in stock so I had to leave my car there. Stuck in a bright red Jetta now.
Ford 6.7L Power Stroke Diesel :: Dead Throttle / Unresponsive Accelerator
Here are the basics:
1. Suppose I come to a dead stop or a rolling stop and I continue keeping a small or very small amount of pressure on the accelerator. When I try to start again gently, there are two outcomes: (a) the "hesitation" or "no or dead throttle response," when I had added only a small amount of pressure, or (b) a "lurch" when I add more pressure to counter act the hesitation!
2. On the other hand, if I come to a stop or a partial/rolling stop, and remove all pressure from the accelerator before I start again, it seems I can start from a stop normally, both gently and under control. I have been experimenting by being certain there is no accelerator pedal at all prior to any start from dead or nearly a dead stop. That isn't, however, a fail-safe approach because of various driving conditions.
But, even if that provides a partial remedy, there is still a problem because this isn't the way the accelerator should work. It should not take all that learning, adjustment, and counter-measures to drive safely.
I certainly agree with the another poster: either of the two results of this: the "hesitation," and/or the sudden "lurch," could put the truck in a dangerous situation. I already have experienced this near chaos a couple of times.
So, is this problem continuing to appear on 6.7 2011 Fords, and, if anyone has a 2012---has this problem appeared on the most recently built Fords?
Ford 7.3L Power Stroke (1999-2003) :: 2001 - Engine Stalls And Dies When Press Accelerator Coming To A Stop
I have a 2001 Ford Excursion Limited 7.3l with 199,980 miles on it.
It has a TS-6. My first problem is that when I come to a stop or slow down to a crawl then press the accelerator the engine stalls and dies. I have looked and looked at threads and can not find this example anywhere. There is no pressing the pedal and it remains at idle. It dies, shuts off, quiets. I have thought icp, tps, ivs
Second problem is that a/c is blowing hot. Other than being out of Freon, what could be other things to check. It does sometime go to default, but has done so in awhile. It does not blow cold in rear and hot in front. They both blow hot. I have replaced the pvh sensor.
Lexus GX 2010+ :: Power Loss / Shut Down - Dead Gas Pedal
While driving to work this morning driving about 25 MPH and increasing speed gradually in traffic the lane I was traveling came to a sudden stop, I slammed on the brakes, ABS took over and I steered around the stopped lane of traffic with no issue. Here comes the problem, I never stopped rolling and traffic was coming up behind me in the lane that I just went in to and I stepped on the gas pedal and got nothing, truck was running, no lights or warnings just a dead gas pedal. This only lasted maybe 5 seconds and then it went but it was totally dead no matter how hard I stepped on the gas and vehicles were beeping at me from behind me. It finally went (5 seconds seems awful long when cars are approaching fast from behind) and it drove fine from there on. I guess I plan on trying to recreate this issue but thought maybe there is something with these trucks that caused this that I don't know about?
View 2 RepliesFord 6.0L Power Stroke Diesel :: 2004 - Dead Pedal Every Now And Then
Recently I have been experiencing dead pedal every now and again, but it eventually comes back. Its happened on the interstate a couple of times and that can get pretty dangerous. Now I am having issues with a no start condition out of no where. It will eventually crank but it churns and churns for a VERY long time, like 15- 30 mins before it will fire again. This has happened twice now. Here are the codes I pulled from Torque:
P0263
P0281
P0299
P0528
Where this is all coming from? I thought at first bad TPS on the adjustable pedals, but now with the no start condition, could it be fuel pump related? Yesterday I was at the dump and it was idling, then got real erratic and shut down. Then wouldn't start for 20 minutes.
Touareg :: 2006 V6 - Pinging Off From A Dead Stop
Have a 2006 V6 with 800 miles. Recently shen I am starting from a stop the engine bangs and kind of makes a knock. I am currently using 93 for gas...
View 1 RepliesTouareg :: Engine Lag On V8 When Accelerating From A Dead Stop
I recall some folks (with certain VIN#s) getting a TSP for correcting the lag when accelerating from a dead stop. I asked my dealer about it during routine service several months ago, but no fix at that time.
View 1 RepliesLexus GS 2013+ :: Dead Pedal Part Number From Parts Department
I have an IS 350 but I am trying to get the part number for the dead pedal for the 2014 + GS F sport. I tried calling my local lexus dealer (which is 50 miles away) and they won't give me the part number over the phone w/o a vin number. Now if someone can ask their parts deptn for a vin number, it can be provided.
View 5 RepliesGolf V R32 :: DSG Slip / RPM Jump Up For A Split Second On Tachometer When Press Accelerator
Had my .:R for 2 years now and just noticed other day. When you cruise in 2/3/4/5 gears about 3000 RPM and suddenly press accelerator 1/3 down RPM jump UP for a split second on tachometer. They go up by one segment (which is 200RPM) and then drop back down.
Now, DSG should not do that to my understanding as clutch pack is engaged! There should be no slip. Also, it is not a drive train shunt, as I kept the car in very slight acceleration.
Lexus ES 2013+ :: Hesitation When Accelerating From Dead Stop
Our 2015 es350 with 2,500 miles hesitates when accelerating from a dead stop, such as from a stop light. We are told this is to be expected with this vehicle. The dealership test-drove the car and say there's no problem. But this hesitation is unlike any other car we've experienced.
View 8 RepliesFocus :: 2003 Wagon Hesitates When Hit The Gas From A Dead Stop
My 2003 2.0 Zetec focus wagon has a problem when I hit the gas from a dead stop. The car hesitates for a second or 2, like it's not getting enough fuel, then it revs up OK. Not all the time though, about 1 in every 5 stops. Once it's moving, there's no problem, you can accelerate just fine. I replaced the fuel filter and added fuel treatment. I also saw it had a real bad valve cover leak that had flooded all the spark plug wells. I replaced the gasket, plugs and wires, but it didn't seem to make a difference. Using a scanner, I monitored fuel pressure at idle, it was about 38.5 PSI. When I hit the gas it it went up to about 40 PSI. I think maybe the ignition module/coil might be going out, but don't want to replace it unless I have to.
View 2 RepliesPhaeton :: Hesitation When First Pulling Away From A Dead Stop Especially When Cold
I need to better qualify when it happens (it may be always, not certain) but when I first drive off in my car in the morning I find the initial 10s or so there is a delay before my power comes on stream.
So I am moving, but very slowly and the V8 doesn't seem to be pulling. There is a stop sign at the end of my street that is maybe 5 houses away, so there isn't a lot of time for acceleration, but its mostly momentum before I hit the stop sign, even if I had depressed the accelerator.
It doesn't jerk or anything when the power comes online but it is very strange to me that there is a delay. Is this normal or an indication of a problem or wear item somewhere?
Passat (B5) :: Thud Sound When Accelerate From Dead Stop
I have just bought a 2000 Passat 30valve V6, from a dead stop when I accelerate it makes a weird "thud" sound and feeling under my feet, almost like when you have a broken tranny mount on a chevy. I have been told that it is the "TPS" or throttle body?? It does not do this shifting into any other gear.
View 2 RepliesCamry :: Steering Wheel Turns To The Right From Dead Stop
I want to understand this. If I am stopped, take hands off the wheel and do a jack rabbit start the wheel almost always turns right. Tried that on flat parking lots and roads cambered each way.
Tires are few months old, all suspension in order (reman rack and pinion + outer tie rods back in august). When cruising everything seems fine, the steering is centered and the car tracks straight.