Ford Wiring/Electrical :: Charging RV Batteries While Driving?
I have a F250 towing a Big trailer and the RV folks have told me that while the factory seven prong will supply power to the RV, it would take a days to charge the RV batteries. So...
1) Does the connector not really significantly charge the batteries?
2) Is there a faster way to charge the RV batteries while driving?
3) Would instructions something like I found at How to Charge Two 12 Volt Batteries on an RV Towed by a Ford F-150 | etrailer.com work?
4) Would #3 eventually tax my alternator so badly that I kill it?
5) Would #3 fry the electronics in the trailer?
I'm trying to charge 2 6-volt marine deep charge batteries in series.
Ford Wiring/Electrical :: 1976 F250 - Alternator Not Charging
I bought a truck recently and I am attempting to get the alternator to charge. A previous owner hacked up the wiring pretty badly. We found that they had connected the voltage regulator to the horn relay for some reason. Anyway, I am trying to get it rewired and have searched existing threads for info and I thought that I had the wiring sorted out, however it is still not charging the battery.
The alternator has been tested and works. The voltage regulator is new. This is how it is currently wired.
Regulator A Terminal --> Battery side of started solenoid --> Alternator Batt Post
Regulator F Terminal --> Alternator Fld Post
Regulator S Terminal --> Alternator Sta Post
Regulator I Terminal --> Empty
Regulator body --> Radiator Support --> Alternator Ground Post --> Neg batt
When running, the battery is showing about 11.8 and slowly dropping as it runs. The truck has an ammeter in the dash, however it looks like it is no longer connected. Does it need to be connected in order for the alternator to charge the battery?
Ford Wiring/Electrical :: 2002 - Alternator Quit Charging / Headlights Little Dim
I *think* I'm having trouble with the alternator on my 2002 Navigator with the 5.4L DOHC engine.
A year ago in Feb 2014 the alternator quit charging. I thought the headlights were a little dim, but when the radio turned itself off and then the heater fan did the same, I noticed that the alt light was on. Then the engine shut down about 1.5 miles from home.
I'd heard of war stories about rebuilt alternators so I sprang for a brandy new one. I also got a voltmeter that fits in the cigarette lighter so I can monitor the system voltage. All seemed good and the new alternator put out 14.2 to 14.5 volts. Except that the battery never seems to be fully charged. If I check the battery voltage with the engine off it typically reads 11.9 to 12.2 volts. I had Interstate Batteries check the battery. They thought it was okay, but offered to put a new battery in to keep me happy.
Six months and 8,000 miles later I'm up in Ontario back country (on vacation - no tools in the truck) and I notice the engine idles at 900 RPM instead of the usual 650 +/- RPM. Oh-oh, I also notice the volt meter is reading 11.9 volts and drops a tenth about every 10 miles.
Found a shop that was open and they installed a rebuilt alternator and it was putting out 14.2 to 14.5 volts. All was good (except for my wallet!).
Now, here we are six months and 5,000 miles later and the rebuilt alternator is struggling to put out 12.5 volts this afternoon. At a steady 50 MPH with the cruise Control on, the radio, and the heater fan on low, the voltage is bouncing between 12.2 volts and 12.7 volts.
Now to my questions:
1. Shouldn't an alternator put out 14.2 to 14.5 volts all the time? Not just when the alternator is new?
And
2. Is there anything on my truck that could be killing these alternators? Or am I just unlucky in the alternator lottery?
Ford Wiring/Electrical :: 1999 F350 - Alternator Over Charging And Gauges Stopped Working
We have a 1999 F-350 V10 super duty. The alt was over charging and the gauges stopped working. Replacing the alt, the guages still don't work, and the new thing is the charge light and selt belt light comes on. The fuses 29 (5amp)and 30(30Amp) which are supposed to be key on hot only are hot at the same time. With these on, it causes a drain killing the battery. Also if the truck is started, the lights go out, but when you try to turn the vehicle off, it stays running, one with the battery disconnected. The only way to shut it down is pull the fuse box power fuse, 50(amp)Some one had been in the dash before we got this vehicle and busted, burned out or removed the check engine light. I can read codes and their vehicle runs fair and does operate. Could this be a dash board? Also this problem appears when the truck is sitting, and the key removed nothing on. No fuses are blown either.
View 3 RepliesFord Wiring/Electrical :: 2008 F150 - Battery Light On And Charging Gauge Drifting Down To The Left
Start out, drive about 20 minutes, get on the Interstate and the battery light comes on 2008 F 150 5.4L 4X4 - 57K miles..... get to my destination, went about 20 miles, turn around to come home, without turning the truck off because of the battery light being on and I notice the charging gauge drifting down to the left, get back on the Interstate and the wipers are slowing down and lights on the dash are dimming.....go around 15 more minutes I lose all lights on dash, wipers, defroster everything, charging gauge is now pegged all the way down to the left and the truck is starting to act up running like crap so I barely make it off the Interstate and call a flatbed, I guess I was about an hour into the trip ..... battery is only about a year old and it started fine that morning and the day before when it was about 12 degrees ...... dealership had the truck, just gave me a call and said they can't find anything ?? ..... never a days problem since I bought it new in late 07' ....
View 5 RepliesFord Wiring/Electrical :: 1981 - Headlights / Dash Lights And Charging Light Will Flicker At Same Time
I have a 1981 F100, lately when I've been driving at night I notice my headlights, dash lights, and charging light will flicker at the same time, and even sometimes my headlights will flash on and off by themselves.
View 2 RepliesFord Wiring/Electrical :: Replaced Alternator - Humming / Buzzing With Key On And Engine Off
2003 f350 6.0l single alternator. Replaced alternator a couple weeks ago with one from napa, noticed a humming with key on and the engine off . Traced it to the alternator, called napa they said it was not normal come get a replacement, put the new one on same thing. Charging in the 13.5 to 14v range the case of the alternator seems to get hot quickly when running.
View 14 RepliesFord Wiring/Electrical :: 1990 - Spark Plug Replaced Now Ticking Sound?
My truck is a 1990 F-150 with the 351. I was replacing the spark plugs last night, got it all wrapped up and everything squared away, and after firing the truck up I noticed a ticking noise. It was not there before I replaced the old plugs, and it is not at all loud. I can hardly hear it with the hood closed. It appears to be coming from the driver's side of the engine. It does not misfire when its idling, and it revs smoothly. However, while driving it is noticeably choppy and feels sluggish.
Any thoughts on what it could be? I used dielectric grease on the boots, but I did not replace the plug wires themselves, or the distributor cap. I am probably going to replace the plug wires today though, because the plugs I took out were not in good condition and its been a bit too long since I replaced them last. Its also worth noting this engine is less than years old. This is a frustrating problem because I've replaced the spark plugs on her before, so I'm not quite sure what I did wrong this time.
Ford Wiring/Electrical :: Windshield Wiper Control Replaced - How To Reconnect Dash Lights
I had the windshield wiper control replaced on my 91 F150 today and found out that the genius who did the repair (and, I might add, broke the wiper control in the first place) forgot to reconnect the dash lights. This was this particular garage's last chance. Everything else works -- idiot lights, hi-beam indicator, running lights, taillamps, hi-beams -- everything BUT the dash lights, so I know it's not the fuse.
View 4 RepliesElectrical-wiring - Acura - Rl - Gauges - Starters :: 1997, Battery And Brake Lights Came On After Alternator Replaced
I got my Alternator replaced last week. Last night, I hit a very small bump, not even large enough to really cause me to slow down, and as soon as I did, my battery and brake lights came on. My RPM gauge also jumped around and eventually went to 0 until I stopped and put the car in park. (The bump might just be a coincidence who knows). So after all this happened, I turned off my car, tried to restart and got nothing. Sometimes I get a click, sometimes 2 clicks up to 4-6 consecutive clicks. Every few times I won't even get a click, just a slight attempt to start, then the car dies, then 2 seconds later all my lights and radio etc. come back on. My problem here is a few things:
1. I've been told it could be the starter. If it's the start, those dashboard lights shouldn't have came on right? just the STARTING portion of the car.
2. I've been told it could be the battery.
Well If i got my alternator tested and Advance said it was working, Why would my battery be dead? And if it WAS dead, wouldn't my lights have went dim or something else happen to the car?
Stalling - Electrical-wiring :: 1992 Buick Century - Replaced Throttle Position Sensor Still Stalls Out
SO, my Buick has given the code for bad TPS, and it was replaced a little over a year ago...and now after the same symptoms, replaced again.. However, this time, right after replacing, it gave the code again, and still stalls out /doesn't want to stay running especially when put in gear. My regular mechanic also recently just put on a new catalytic converter and a new fuel pump and fuel filter. I'm at a loss, and desperately need my car back.
A little back history...about 3 years ago a 'friend' was to work on my car to install the thermostat and power washed the engine...which shortly after started having all kinds of electrical issues. Right after that, my mechanic had to install a coil, spark plugs, new ignition panel and the 1st tps.
Ford Wiring/Electrical :: 1967 F100 - Instrument Cluster Gauge Wiring
I am a beginner when it comes to anything involving wiring. I am looking to re-wire all of the wiring coming off of the instrument cluster gauges. Once I have completed all of the wiring on the gauges, I may feel confident to move onto something else. As of rite now, it appears as though my truck is still running on all of the original wiring, and over the past few weeks, I have been having many wiring related issues. I found a schematic that includes the wiring for the gauges that I am going to go off of. I have a couple of questions before I begin.
1.) On the schematic, it shows connectors such as "Connector G" which is moving all of the gauges wires to there locations. Do I need to use a specific Ford connector, or could I purchase a new connector at any hardware store that carries them? As far as I am concerned, connectors do the same thing as all other connectors. (Let you connect and disconnect for easy instrument cluster removal.)
2.) I am not looking to purchase one of those expensive wiring harnesses. I would like to just purchase some wire that I can cut / use myself. What brand / type of wire should I be looking to purchase? I do not care if it is striped / colored as I will use wire tabs to name / label each wire.
Other than that, I feel confident enough to attempt something such as this. Here is the wiring schematic I am going to use.....
Ford Wiring/Electrical :: 2002 - Complete Headlight Switch Wiring Diagram?
Any COMPLETE headlight switch wiring diagram? Everything I find online only shows 2-3 wires in each sub connector, nothing with all wires and colors, and what they do. and of course the factory service manuals no longer work on my new computer. the switch and associated wires went up in smoke 2 hours ago, and this truck is my only means of transportation rite now. what i need is headlight wiring with colors so i can temporary hook up a toggle switch to have lights until the new switch and connectors come in next week. I went to pull the switch and connectors out of the parts truck, but of course that does not have fog lights so it uses different switch and connections.
View 14 RepliesFord Wiring/Electrical :: Moving Engine And Ignition System - Wiring Harness For Further Use?
I plan on moving the engine/drivetrain from my 1986 F350 460 to my 1996 F250. I also want to move over the 1986's ignition system with a Duraspark 2 setup.
Although I could just cut in the easiest places to remove the wiring for later reuse I am looking for where to make the cuts, what to take and what to scrap. Alternatively I am also asking if there are aftermarket or OEM replacement sets out there are aren't a ton of money. The current harness in the 1986 has been sprayed with engine oil and cooked for 27 years so I am looking at alternative options if there are any.
Ford Wiring/Electrical :: 1997 F250 - Rear Tail Lights Wiring
I have a 97 F250 HD. Wiring the rear tail lights. When we bought it the had cut off the wires going to both sides of the rear lighting assemblys and I was wondering what wire went to what i have the left turn signal working just can't seem to get the brake/back up light to work on that side and i can't figure out how to get the right side going either.
View 8 RepliesFord Wiring/Electrical :: 2004 - Instrument Cluster Wiring Diagram?
Looking for a source for a wiring diagram for the 2003/4 f350 instrument cluster, specifically the wiring/connectors to the gauges? A link to a PDF file would be nice. I would like to try and disconnect the PCM control to the transmission temperature and engine temperature and drive the gauges from my own sensors to bypass the non-linear behavior that ford decided was in our best interest. I am NOT interested in installing any more gauges, just want to control the ones already present with my own signals. It is possible that these gauges are all addressable devices on a common bus, instead of individual controls.
View 8 RepliesFord Wiring/Electrical :: 7 Pin Trailer Wiring - Running Lights Not Working
Just bought an 04 Super duty with the factory plug 7pin and 4 pin plug. Checked the fuses and finally tracked down the 2 relays under the hood but can't seem to find anything wrong. Everything on the trailer works except for the running lights. Is there another fuse or something I have missed? Trailer works fine on my buddies Duramax and worked fine on my old 97.
View 14 RepliesFord Wiring/Electrical :: 2004 - Installing Seat - Wiring And Functions?
Im installing a set of 04 lariat seats into a 00 truck. I need to know how to hook up the heat. The power part is no problem. What I thought was right which was a separate constant 12v and a switched 12v for the module and ground apparently isnt right. If somebody could ohm out their harness on a 01 truck that would be great. As I have it right now the light on the switch comes on but almost instantly turns off.
View 14 RepliesFord Wiring/Electrical :: 1987 F150 - Wiring Diagram With Carburetor?
Looking for a wiring diagram for a F-150 XLT LARIAT 5.8L 4BBL, all the books I have looked at show the wiring for this year with fuel injection and this truck came with a 351W with a Holley 600 4BBL, I have a few wire's in the engine compartment that melted away all the insulation, they are located close to where the harness passes the firewall before the ignition module. Is this a common problem on old models ?. Need a clear copy of the correct diagram for a f-150 1987 with carburetor, how I can get a copy so I can fix this problem before it gets worse.
View 3 Replies