Ford Super Duty (1999-2016) :: Power Steering - Louder Whine Or Squeak When Hit A Large Bump Turning
I am a recent new owner of an 06 f350 Powerstroke. Steering Box developed a leak so I decided to replace the box and go ahead and do the pump and hoses while at it. Pump would make some noise so i figured I'd just do it all and be done with it or so I thought. The job was a pain, much harder than the pump and boxes i've done on the older 7.3 powerstroke.
Anyways, used all OEM components (pump was a rebuilt rotorcraft, can't buy new anymore) and everything seemed great for about a day. I tried to bleed the air out per standard practice of turning the wheels with the truck off the ground. At startup and during the first day it had almost no noise at all and the steering felt much easier than the old pump.
Then the pump started to develop the standard annoying ford power steering whine that I hear all the time. Drove it over the weekend on a 160 mile trip and the noise just kept getting worse. As of tonight I can't turn the wheel if the truck is stopped even with my foot off the brakes.
I used synthetic ATF for fluid and there is absolutely no foam or aeration in the reservoir. Good news is I don't have any leaks but the bad is I now don't have power steering. It does make a much louder whine or squeak when I hit a large bump turning, I guess that's just the sound of the pump being stressed more. I am guessing the pump just crapped out but before I do it all over again.
Ford Super Duty (1999-2016) :: 2003 - Squeak Coming From Front Axle Seals
I have a 03 super duty 3/4 with 45000 miles. I have squeaking sound coming from the front end. My local ford dealer says ford has been replacing those front axle seals but the noise comes back.They said the fix is to keep a dab of grease on them of which I.m doing.That does take care of it for awhile but the squeaking does come back until I put a dab of grease back on them.
View 14 RepliesFord Super Duty (1999-2016) :: 2009 F350 - Mild Squeak From Front Driver Side Hub
09 F350 with 50,000 miles, just starting to hear a mild squeak from front drivers side hub I believe. Can hear it while in 4 wheel drive, my thoughts is that the original universal in the hub is beginning to give up. My question is how long would you think I have before I need to get this done? Would this be a warranty item? I am not sure anymore.
View 2 RepliesFord Super Duty (1999-2016) :: 2014 F350 - Rotational Squeak From Under The Cab Or Possibly Left Front Tire
Its a rotational squeak, that sounds like its under the cab or possibly left front tire. The truck only has around 25k miles on it. I recently had a 2" leveling kit installed, 35" tires, and rear airbags installed (within 5k miles). I checked the universals and they seem to ok and there is no noticeable clunk. I am hoping its something small.
View 7 RepliesFord Super Duty (1999-2016) :: Front End Hop When Only Turning Right In 4 Wheel Drive
1. Why does my front end hop when only turning right in 4 wheel drive?
2. O nly one of my back tires spin, so does that mean that when I put it in 4 wheel drive I only have 3 tires spinning?
oh I got a 2001 xl 5.4 f250 and is this normal
Ford Super Duty (1999-2016) :: Front End Noise When Turning Left
Last couple drives I have noticed some front end noise on the left side. Back in May I also noticed grease all over behind the rotor. I believe this is the grease inserted via ABS hole into the unit bearing. I do not hear the needle bearing crunching while driving and did not here it in May either. I also attempted to move the unit-bearing up and down thinking the axle seal was toast but it seemed solid at the time.
Today I hear some noise while turning left which lead to the pictures below. Wet side is Driver side, dry side is passenger. Tomorrow morning I should have some time to take a look at this more in depth. Passenger needle bearing was changed last year and no issues since then......
Ford Super Duty (1999-2016) :: F350 - Front End Vibration While Braking And Especially When Turning
I'm having trouble finding the source of a vibration in the front end if my 1999 f350 super duty 4x4. The vibration is felt all the time but worse when under 40mph, while braking, and especially when turning.
I have replaced the rotors and brakes, tie rods and Drag links since the issue started but no change. In the vibration. What should I check next?
Ford Super Duty (1999-2016) :: 2003 F250 - Front End Clunking When Turning
Have an 03 f250 6.0L and the tie rod from pitman arm moves easily and there isn't a steering stabilizer, noise got worse after I put new tires on front but it's a loud clunk that I can feel. I've replaced the sway bar bushings and end links. Would the worn tired rod make that noise or would it be ball joints?
View 1 RepliesFord Super Duty (1999-2016) :: Clunking In Front End When Turning Hard Even With Hubs In Auto
So I noticed the past few days my 09 F250 was clunking in the front end when turning hard even with the hubs in auto so I knew there was an issue in there somewhere. This morning I took the jack and found the passenger side would not release no matter which way the lock was turned. Pulled the locking assembly out and found a couple of the pieces of plastic cage broken (truck has 250k miles) which is to be expected I guess but the locking ring that holds the inner piece that slides over the axle stub was off and hanging next to the c-clip on the axle.
So with the plastic of the cage already being broke and the mileage on the truck it's clear I need a new lock for that side.
Here's my dilemma, I have to deliver a conference room table 200 miles away tomorrow morning that they need for meeting tomorrow afternoon at 3:00pm. I cut the rest of the plastic pieces and took the gears out leaving just the cover with the diaphragm and put it back on the hub. I can't come up with any logical reason why I can't drive the truck this way but just want to bounce it off the experts here before I take off on a 400 mile trip in the morning. The only thing I can come up with is if I were to engage the 4wd the vacuum might suck the auto-lock diaphragm in and pop it but otherwise I can't find any reason to not run it this way, the hub is still sealed up and free-wheeling just like if it were in 2wd anyway.
Ford Super Duty (1999-2016) :: 2008 - Front DS Wheel Binding When Turning And Loose Seals?
I have a 2008 F-450 Lariat 6.4 4x4. I recently started noticing the front driver side wheel (best I can tell) wheel makes a noise as though it's binding uo when turning either direction, and I can feel it as well. 4wd is not activated and the hubs are in auto. When the front end is off the ground, I rotated the wheels and they spun independently unless the hubs were locked. I noticed what appear to be seals on both the driver and passenger side hanging loose (see pics). What this might be? I recently used the 4wd when we visited White Sands National Monument while pulling a 5th wheel RV.
View 9 RepliesFord Super Duty (1999-2016) :: Squeak In The Rear Interior
I have a 2008 F-450 with the King Ranch interior. Every time I hit a bump in the road, I hear a squeak in the back. It sounds like it coming from the pillar behind the door, but I can't seem to find anything that is loose or would cause this noise. I hear nothing when the window is open (from outside the cab), so I don't think it is a body mount or anything.
I've seen posts on this saying it is the back seat and I've completely taken mine out and checked every bolt and made sure it isn't rubbing on anything.
This is the 3rd crew cab truck i've had and my 2005 made the same sound, though not as frequently. My 99 also made the same sound, again not as frequent as this truck. This truck does it all the time when empty, but seems to do it a little less when loaded down, probably because the suspension is absorbing more of the bump. I can't believe this is isolated to my trucks and I am wondering to identify this noise.
Ford Super Duty (1999-2016) :: 2002 F250 V10 - Squeak From Under The Truck
I have a 2002 f250 super duty v10 with the manual transmission... It has aloud squeak from under the truck when Im slowing down or maintaining a certain speed. The squeak goes away when I accelerate or if I push the clutch in. It does have a vibration to it when im speeding up. And shakes bad sometimes when I let off the clutch from a stop..
View 1 RepliesFord Super Duty (1999-2016) :: Bearing Squeak And Headlights Flicker / Battery Not Charging
I replaced my alt. because in the morning the bearing would squeak and the head lights flicker. It was a life time alt. Put the new one in now it wont charge. Took it back and got another, same thing. Also replaced the starter relay and battery. I checked the fusible links and replaced a terminal connector. The wires look good. There is 12v on the alt lug and pins 1 and 3 on the connector with the key off. Turn key on and 12v disappears form pins 1 & 3. Also checked all fuses in both boxes. I ohmed out the wire harness from the alt back to the connectors, all good. What am I missing? This is a 99 f530 5.4l.
View 9 RepliesFord Super Duty (1999-2016) :: Squeak / Slight Creaking Sound In Steering Wheel
I've noticed lately when I turn the steering wheel slowly I get a slight creaking sound from somewhere behind the wheel. What is causing it and if it's worth tearing it apart to fix it. I only notice the noise when the radio is off and turning the wheel while sitting still.
View 9 RepliesFord Super Duty (1999-2016) :: 2008 F250 - Squeak And Clunk / Bearings Are Loose
My rear wheel bearing are a little loose. This afternoon while diagnosing a squeak in the back I found this. While pushing the truck side to side there is a clunk and when you lay your hand on the tire you can feel it, bearings are loose. Nothing during the operation of the truck to give this away, truck runs and drives as it should but I need to check it our before something does go wrong. What I'm looking for is a torque / preload that the rear wheel bearings need to be set at.
View 2 RepliesFord Super Duty (1999-2016) :: 2014 F250 - Squeak Coming From Drive Shaft Area
I have a 2014 4WD Super Duty. It has a squeak that is coming from the drive shaft area. I had someone listen to it as I drove slowly next to them. It is a repetitive: squeak squeak squeak squeak squeak. Not loud. The frequency increases as speed increases. I could believe it may be a U joint based on the frequency, but seems hard to believe with a new truck. I heard this sound when I first got it, but the sound was so slight that I thought it was just some sound associated with a newer engine. But now it is becoming a bit louder.
View 4 RepliesFord Super Duty (1999-2016) :: 2008 F250 Squeak When Turn The Wheel While Tire Is Spinning
I have a 2008 F250 XLT. When i am driving and turn the wheel a squeak is noticeable while the tire is spinning. as i speed up the squeak gets faster and slower when i slow down. I have it narrowed down to the right front tire but cant figure out what is causing it.
View 5 RepliesFord Super Duty (1999-2016) :: 2003 F250 Squeak While Driving Through Town Sounded Like U-Joint
I have a 2003 F250 Ext Cab 158" wheel base, 5.4, auto. 2wd
Last week I noticed a squeak squeak squeak while driving through town, sounded like the u-joint. I got home, jacked it up and pulled the rear shaft. Unfortunately I, bone-headedly, did not mark it when I pulled it. I took it into town and had a shop put in two new U-joints from autozone.
I got home and, forgetting to mark it, put the driveshaft in 180 degrees out. This caused the whole assembly to get out of balance and tear up the carrier bearing.
I replaced everything, pulled the complete shaft and disassembled it to put the new carrier on it...again, for some reason I didn't mark it. I knew I was supposed to.
It destroyed the carrier bearing again. So I limped it to my mechanic the next morning. He went through and replaced the front u-joint and carrier and called it good. I picked it up that afternoon and it was vibrating again.
I took it back and they kept it overnight and fixed it again. The problem they had was the driveshaft was coming back on the 'flex' and rubbing into the carrier instead of sliding back and forth, it was sticking.
They got that all fixed up and the wife picked up the truck while I was at work Friday. I called her at lunch and she said it was still squeaking like before I took it to the shop. I get home that evening and drive it and, sure enough, it's squeaking like it has a bad u-joint.
But the squeak didn't start right away, I had to drive it about 5 miles for it to start, and then I didn't hear it until I slowed down enough to get rid of the wind noise.
I took it back to the mechanic this morning. He called me around 4 and said they drove it about 25 miles around town and on the highway and couldn't duplicate the noise.
He said they went ahead and hit the grease zirks on all 3 u joints(even the ones they didn't install on the rear shaft) and they couldn't hear any squeaks. So I pick it up, drive through town a bit and start heading home. No squeaks.
I get about 20 miles out of town and slow down going over a bridge with the windows down, and there is the squeak again. Still sounds like a bad u-joint. But I didn't hear it until I drove it about 25 or 30 miles. What this noise is or what I need to be looking for?
Ford Super Duty (1999-2016) :: A/C Turning On With The Heat?
Just noticed something funny yesterday while flushing my radiator. I have an 04 F350 with the 6.0. When I have the heat set to come out both high and low vents, the A/C compressor also kicks on. The pipes by the passenger side firewall get cold. If I set the heat to just come out high or low, it turns off. This is not with the defroster on. Why does this happen? Is it supposed to happen?
View 5 Replies