Ford Super Duty (1999-2016) :: 2014 F350 - Reverse Camera Wiring
On one of the trucks in work, the salt has corroded the truck side plug for the reverse camera in the tailgate. Because of this, the camera no longer works.
Is this part of the whole rear wiring harness, or it the tailgate plug a separate pigtail that can be replaced? If it is a separate part, what is the part number so I can order it?
Ford Super Duty (1999-2016) :: Reverse Lights Dim Or Don't Work At All
I have an 02 f350 XL. The other day it rained and all of my rear lights went haywire. All problems are out back.
- Step on brakes, high mount, and lic plate lights light up with brakes.
- Turn on marker lights and the high mount lights up and the tails and lic plate lights dim.
- Marker lights on, apply brakes, and the tails and lic plates lights go out on bed, high mount activates.
- Use turn signals with markers off and all of the rear lights including high mount flash..
- Reverse lights dim or dont work at all.
I have tried a new MF switch, checked all fuses. cleaned rear frame ground. took apart brake switch and cleaned it. non tilt column but checked wires. replaced flasher. unplugged brake light switch and headlight switch, problem is still there. removed trailer relays, no luck. checked all chassis plugs. disconnected TRS.
I should mention i have 12v cummins swap and a pcs with standalone harness. no problems over the last few months since swap until it rained last monday.
Ford Super Duty (1999-2016) :: 2005 - Reverse Sensors Won't Work?
My reverse sensors have stopped working. As soon as you put in reverse, the on off button will light up and be telling you that it is off. What is going on and how do I correct this?
View 3 RepliesFord Super Duty (1999-2016) :: Addition Of Backup Camera?
Looks like a great option the Job 1 trucks missed out on. Looking into the feasibility of it. This is my first Ford so I am not really sure how the factory plans these things out.
View 14 RepliesFord Super Duty (1999-2016) :: Continuous Beep In Back Up Camera
I have a 2014 F-250 6.7 crew cab. Noticed today when I put the truck in reverse there's a continuous steady beep where as before the beep was intermittent, as I got closer to the object it would become faster until it would eventually become a steady beep. Which I'm sure was working correctly. Tried cleaning the Camera lens but it didn't work, it continued the steady beep now I'm worried.
View 14 RepliesFord Super Duty (1999-2016) :: 2005 - Back Up Camera Installation?
I've been wanting to install a back up camera on my truck for quite some time now. A month ago I backed into a steel pole in a parking garage and trashed my bumper, making me realize I need a backup camera I ordered a cheap ebay camera and 30 feet of extra power and video cable for the install.
Down the road I'll order something better but for now I'm working with a cheapo 15 dollar camera I know where I'm mounting the camera and where/how I'm running the cables, I'm just not sure how to get my head unit to switch automatically when I engage the truck in reverse. I have a pioneer double din touch screen radio as seen here on crutch field.
[URL]...
Ford Super Duty (1999-2016) :: Camera Monitor Keeps Falling In The Heat
I installed a Hopkins back up camera early last year. The original double sided tape that holds the monitor to the windshield didn't hold up long. Tried some of the gorilla double sided tape. A couple weeks max. Then I tried the 3m double sided tape. It would work a month or so. Did good all winter, but now I'm going to have to redo it for a 4th time already this year. It sticks to the glass, it's pulling loose from the plastic mount made onto the monitor.
View 3 RepliesFord Super Duty (1999-2016) :: F350 - Adding Second Backup Camera?
I would like to add a second backup camera to my 2016 F-350 Super Duty to assist when hooking up to my fifth wheel. It is a Crew Cab with the Factory Tonneau Cover so my view of the hitch is blocked. I would like to add the third brake light high mount camera and be able to toggle between my OEM/Tailgate Camera and the High Mount. I have found a couple that claim they will work but both require tapping into the main connector on the back of the display, but not quite sure how to open it up. Accessing the connector is not a problem, just getting it apart without breaking it is the question. The "Lockpick" system has not been tested/certified for the 2016 model.
View 3 RepliesFord Super Duty (1999-2016) :: 2011 - Nav Install - Camera Redirecting?
I have recently upgraded the factory sync system in my 2011 f350 lariat to a factory sync with NAV. I am looking for tha way to redirect the fideo feed to the rear view mirror to the nav system, I have found the wire coors and pin locations for the radio end, just need the info if there is a way to move it in the a pillar harness on the passenger side to the radi harness.
Did ford really put 2 different harnesses in the cab if you had nav or not? Factory nav unit and factory camera (camera was in the vehicle to begin with). the radio side is pin 1 and 6 on the 10 pin radio harness.
Ford Super Duty (1999-2016) :: Replaced Stolen Tailgate / Camera Not Working
I left town and accidentally left the tailgate on my 2011 F250 SuperDuty unlocked. It was stolen.
Found a replacement, replaced the broken handle, installed new key lock, transferred to camera and plugged it in. My rear-view mirror is not receiving the signal, just a blue screen. Is there something else I need to do to complete the process of connecting the camera.
Ford Super Duty (1999-2016) :: Backup Camera Stopped Working About One Third Of The Time
I have a 2013 F350 Lariat. Recently, the backup camera has stopped working about 1/3rd of the time. When it doesn't work, a yellow triangle icon appears on the screen with " Camera unavailable. See dealer." The dealer has checked it, twice, and is unable to locate the problem.
View 13 RepliesFord Super Duty (1999-2016) :: 2015 F250 XL - Back Up Camera Installation
First tech post for my new truck. I just bought a hold-over but new 2015 F250 XL Supercab 2wd and love the simplicity of no unwanted options. That said, there are two features I am adding. The first is perfectly straightforward, cruise control (swap button cluster and have the function turned on by the dealer). The second is a tiny bit more involved, back-up camera, in mirror display with bluetooth hands-free (I like the simple AM/FM radio because I can work it all with gloves on).
So I basically need three things from the truck and my research has been inconclusive on a couple of things because most of the threads are for 2014 or earlier. I think I can pull switched 12V and ground (pin 1 and 4) plus reverse lights (center, or pin 7) all from the the trailer wiring harness. It appears these are not affected by the canbus load restrictions of other places to tap reverse signal (remember, XL so likely nothing in the overhead console for the auto-dimming rear view mirror). Are there any challenges with this when I do hook up my enclosed trailer or when it is not hooked up regarding the trailer brake controller/anti-sway?
I already found a good youtube video for how to route the wires so I think this is my primary challenge at this point.
Ford Super Duty (1999-2016) :: Back Up Camera Works Only When Interior Lights On?
Dome light stays on drive over 15 mph lights turn off back up camera works when lights off lights on no back up camera 1999 f350 super dutuy
View 1 RepliesFord Super Duty (1999-2016) :: F350 - Adding Rearview Camera After Truck Already Built
I am looking at a 2016 F350 that I found on a local dealers lot. It has most of the options I wanted MINUS the Rearview Camera.
It is an XLT Reg cab so I do not have the display screen (When built with this option installed, the display would be in the rear view mirror, not the display screen.)
So I am wondering if it is even possible to add this option after the truck was already built and have the dealer install it? Or is it one of those options that would have to be done before build/assembly?
Ford Super Duty (1999-2016) :: F250 - Reinstall Review Camera After Removing Tailgate
We got an F250 in June and had an ARE CX series cap installed on the truck yesterday. We didn't realize the installation of the cap would mean we lost the review camera when the tailgate was removed (DUH). We loved the review camera for hooking up our trailer and are wondering if there is any way to reinstall it on the cap. Or, purchase another camera and integrate it into the existing Ford screen......with the guidance lines?
View 2 RepliesFord Super Duty (1999-2016) :: 2010 - Wiring For Power Dash Camera Using The Upfitter Switches?
I have a 2010 F250 and wanted to power a dash camera using the upfitter switches. I purchased a 12volt wire, but am unsure on where to wire it so that it will only power up when the ignition is on..
View 7 RepliesFord Super Duty (1999-2016) :: Backup Camera Only Shows In Rear View Mirror And Not In Nav Screen
I bought a 2011 F250 with nav and backup camera. the backup camera only shows in the rear view mirror and NOT in the nav screen. How to program it to show in the nav screen also?
View 7 RepliesFord Super Duty (1999-2016) :: 2012 F250 - Rear View Camera Activation Wire?
I'm putting a new double din stereo w/ backup camera in my truck, I have everything wired except the violet/white wire (from the stereo) that needs to be hooked to a wire (on the truck) that will activate the camera when you put it in reverse. I cannot figure where this wire is on the 2012 for the life of me.
View 3 RepliesFord Super Duty (1999-2016) :: Reverse And Low Are Non-existent
Picked up a project truck for the spring..... single cab 99 4x4 7.3 with the 6 speed. 1st through 5th work perfect...... however reverse and low are non existent.
What I am sure of:
1. I'm positive its not a clutch problem.
2. The shifter goes into the position of reverse and low just fine but there's no engagement at all.
3. I can put the shifter in low or reverse position whether the clutch is engaged or not... makes no difference at all.
Once i was messing with it and somehow by moving the stick sort of to the side it hit reverse and the gear worked fine but then it remained in reverse no matter what position the shifter was in until i was able to move it around enough to get it out.
I'm thinking bent shift fork? Looking at a few writeups on rebuilds it looks like i might be able to replace the fork without dropping the tranny.... just divorce the t-case and remove back half of trans?