Ford Super Duty (1999-2016) :: Reverse Camera Won't Work
I have recently put a platinum tailgate on my 2012 off a 2014 and for some reason the camera no longer works just wonder why this is and how I fix it....
Click the image to open in full size....
Ford Super Duty (1999-2016) :: F350 - Adding Second Backup Camera?
I would like to add a second backup camera to my 2016 F-350 Super Duty to assist when hooking up to my fifth wheel. It is a Crew Cab with the Factory Tonneau Cover so my view of the hitch is blocked. I would like to add the third brake light high mount camera and be able to toggle between my OEM/Tailgate Camera and the High Mount. I have found a couple that claim they will work but both require tapping into the main connector on the back of the display, but not quite sure how to open it up. Accessing the connector is not a problem, just getting it apart without breaking it is the question. The "Lockpick" system has not been tested/certified for the 2016 model.
View 3 RepliesFord Super Duty (1999-2016) :: 2010 - Wiring For Power Dash Camera Using The Upfitter Switches?
I have a 2010 F250 and wanted to power a dash camera using the upfitter switches. I purchased a 12volt wire, but am unsure on where to wire it so that it will only power up when the ignition is on..
View 7 RepliesFord Super Duty (1999-2016) :: F350 - Adding Rearview Camera After Truck Already Built
I am looking at a 2016 F350 that I found on a local dealers lot. It has most of the options I wanted MINUS the Rearview Camera.
It is an XLT Reg cab so I do not have the display screen (When built with this option installed, the display would be in the rear view mirror, not the display screen.)
So I am wondering if it is even possible to add this option after the truck was already built and have the dealer install it? Or is it one of those options that would have to be done before build/assembly?
Ford Super Duty (1999-2016) :: F350 - Wiring Diagram For Taillights?
I am looking for a wiring diagram for that taillights for a 1999 f350 pickup. I am working on a friends truck that doesnt have any taillights and I would like to have a diagram in hand before I get started on it.
View 7 RepliesFord Super Duty (1999-2016) :: 2005 F350 - Radio Wiring Diagram
What is the factory radio wiring colors or know where I can find a diagram?
View 14 RepliesFord Super Duty (1999-2016) :: F350 - CC Pop N Lock Installation - Wiring Harness?
Installing a Pop N Lock on a 2016? What were the wire colors you tapped into?
View 3 RepliesFord Super Duty (1999-2016) :: F350 Stutter When Go Into Reverse
I just picked up a 2003 F350 4X4 5.4L it has 130k on it. It drives ok, it doesn't seem to be able to accelerate very quickly and one thing I noticed is when i go into reverse it seems to stutter or feels like it scoots a little bit.
View 14 RepliesFord Super Duty (1999-2016) :: 2007 F350 - Uplifter Switch Wiring Diagram
I just picked up my 2007 F350 as a replacement for my 2003 F350 (still have the 2003). I really like the uplifter switch option on the truck, I can normally figure things out but I am one of those people who is electrically challenged (home and auto)and also am one who does not wish to butcher the new ride (same for the home)to gain an education in the art of wiring. I would like to reinstall my headache rack lights on this truck as they are needed for winter work. I was in my truck manual and the info for wiring is weak and the website did not respond nor did my email to ford. I have found the wire harness but it is not tagged as a pair/color to switch. I have the lights already grounded to the rack, so I am thinking I just need the hot wire from the switch. Looking for the color code for positive and ground for the switches.
View 14 RepliesFord Super Duty (1999-2016) :: Headache Rack Wiring Diagram With 2 Bright Reverse Light And 2 Not
I just had a headache rack built for my truck. Looking to wire in 2 very bright reverse lights, 2 not so bright lights to deal with stuff in the bed of the truck at night, and also mounted a receiver hitch so I can hook a winch up back there when needed. looking for opinions on wiring for all of this. Never wired stuff like this so I'm shooting in the dark. My wiring skills are adequate but not great.
View 7 RepliesFord Super Duty (1999-2016) :: F350 - Transmission Won't Go Forward But Has Reverse?
It seems its the 4R100 tranny non pto of course and 2wd version. I drove down the rd. after bleeding the brakes, new caliper front right, came home let it idle for about 10 min, shut her down. Went to move it about an hour later, it went into reverse no problem, then when put it in Drive it revved like it was in neutral. There was no banging, no clunking, nothing to make it seem like something catastrophic happened.
I then did a line pressure test and Reverse was fine 200 psi for sure, in drive mode however it was low like around 50 but had to rev real high to get it to 150 like 3/4 pedal and it would want to seem to go forward at a crawl but nothing more. Next I did the obvious and cheked the fluid, it was about 1/4 quart low so added a bit. The fluid did not stink and was beautiful red like new.
I then tried again... no dice same scenario. Then took off the pan, no metal chunks and virtually no dust on the magnet??? Ok so I figure maybe something with the shift valves? Took them all off and the accumulators as well, all check ***** were in place and all valves moved freely.
Now onto the the solenoid pack, checked all per manual for ohms and all were perfect reads at about 27 Ohms, except the EPC solenoid that is the big one on the pack, it should read about 3-5 ohms but this guy is about 12.5 ohms.
I spoke to a tranny shop in town and they said it would not be the EPC and that I could "unplug" the solenoid pack and It would still move forward without it but not to drive like this as line pressure would skyrocket?
Why this thing would have 200 lbs pressure for reverse and so little for forward I mean? that should mean that the pump is working great, if there was a broken something metal I figured I would hear something rubbing or banging or see some shavings? Can this be a "worn out" valve? or gasket issue?
Ford Super Duty (1999-2016) :: 2002 F350 - Reverse Lights Won't Go Out Even With Engine Off And Key Out
My daughter came home a bit ago and told me the backup lights on my '02 F350 were on. Pretty odd because the keys were in my pocket at the time.
When I opened the door to the truck, I noticed a faint electrical smell and noticed the fan for the environmental controls was running as well.
I'm guessing the light issue is probably a sensor or something at the transmission but why would the blower be running as well?
Early last week I finally decided to try and figure out why my cruise control hadn't been working and discovered fuse F2.34 was blown. Replaced it and went through the test procedure described here: [URL] ....
No issues and the cruise is working again. I had to take it on a road trip for work the following day and didn't have any issues for almost 1,000 miles.
I drove it last night and didn't have the issue. I drove it again this morning to several places and everything was fine.
I've got a tuner with a code reader. Would something like the above problem register a code?
I've not stuck my head under the truck yet (it's cold and dark out.) What sensors I might need to check out? Is there a testing procedure available to ID the faulty component?
The battery is disconnected for the night, but I'd sure like to get this thing sorted before I hit the road for work again this week.
Ford Super Duty (1999-2016) :: 2003 F350 - Studders / Skips Only When In Reverse
I have a 2003 f350 4WD that studders or skips only when in reverse. I noticed it the other day while plowing. The noise seems to be coming from the transfer case but only in reverse. If I go real easy it won't happen but it will happen if I gas it a little. Happens both with hubs locked or unlocked. BTW it is a manual shift transfer case and manual hubs.
View 3 RepliesFord Super Duty (1999-2016) :: 2010 F350 - Reverse Gear Signal Wire
I installed a reverse camera to my new Pioneer in-dash nav head unit this morning. I wired (at the rear of the truck) the power signal lead to the reverse wire at the trailer connector. I also need to wire a reverse signal input into the back of the head unit. I really do not want to run a power lead from the rear of the truck to the cab. Is there a wire under the dash I can tap into, or could I use the wire going to the backup alarm that’s somewhere under the dash (if I can find it). 2010 F350 deisel, crew cab, 4WD, long bed.
View 9 RepliesFord Super Duty (1999-2016) :: 2005 F350 - Reverse Lights Blowing Fuse
My 2005 f350 reverse lights just started to not work . So I checked the fuse and it was blown and every time I put new fuse in it blows, where to check. Sounds like a ground issue am I correct .
View 4 RepliesFord Super Duty (1999-2016) :: 2004 F350 - Tow Haul Mode Pop On And Off When Shifted From Drive To Reverse
One of our trucks, 2004 F350 Powerstroke, my company truck, recently the last snow even we had, my tow haul mode would pop on and off almost evertime I shifted from drive to reverse while plowing. I didn't want it on, it just kept poping on and off. Thought maybe the button was stuck, but it moved like normal. My other thought was there is a loose connection in the shifter or column causing it to go on and off.
View 6 RepliesFord Super Duty (1999-2016) :: 2014 F350 - Wants To Change Seats?
I have a 2014 f 350 super cab xlt. Ford design engineers should be ashamed. But really who has installed the older (2009 ish) ford seat in there trucks for a little more comfort? How much fabrication was needed? Hate to say it but if I cant put the older truck seats in I'm going to buy GMC. These seats really suck.
View 3 RepliesFord Super Duty (1999-2016) :: 2014 F350 - Airbag Removal?
How do you remove the air bag on a 2014 F350 super duty. I have search every where. Nothing new on Google.
View 5 RepliesFord Super Duty (1999-2016) :: 2004 F350 - Loud Clunk Noise In Forward Or Reverse Hi Or Lo When Accelerate
Ive got a 04 f350 that after u shift into 4hi or 4lo when u accelerate it it makes loud clunk noise in fwd or reverse hi or lo. With hubs unlocked it still clunks. Have checked, wheel bearings, axle U-joints, and driveshaft joints all good. So I am thinking I've got issues in t-case. Popped drain plug out and wow that dex merc 4 looks nasty. So thinking I need exploded view of transfer case.
View 4 Replies