Ford Super Duty (1999-2016) :: F350 - Adding Second Backup Camera?
I would like to add a second backup camera to my 2016 F-350 Super Duty to assist when hooking up to my fifth wheel. It is a Crew Cab with the Factory Tonneau Cover so my view of the hitch is blocked. I would like to add the third brake light high mount camera and be able to toggle between my OEM/Tailgate Camera and the High Mount. I have found a couple that claim they will work but both require tapping into the main connector on the back of the display, but not quite sure how to open it up. Accessing the connector is not a problem, just getting it apart without breaking it is the question. The "Lockpick" system has not been tested/certified for the 2016 model.
View 3 RepliesFord Super Duty (1999-2016) :: Backup Camera Stopped Working About One Third Of The Time
I have a 2013 F350 Lariat. Recently, the backup camera has stopped working about 1/3rd of the time. When it doesn't work, a yellow triangle icon appears on the screen with " Camera unavailable. See dealer." The dealer has checked it, twice, and is unable to locate the problem.
View 13 RepliesFord Super Duty (1999-2016) :: Backup Camera Only Shows In Rear View Mirror And Not In Nav Screen
I bought a 2011 F250 with nav and backup camera. the backup camera only shows in the rear view mirror and NOT in the nav screen. How to program it to show in the nav screen also?
View 7 RepliesFord Super Duty (1999-2016) :: Addition Of Pusher Fan To Cooling System?
My 99 super duty crew cab A/C does not cool the inside of the truck very well when sitting in stop and go traffic like I always do, in south Louisiana. I recently rebuilt the whole a/c system and it works great when I start rolling. I think my fan clutch is working correctly. I have been thinking about a way to convert to electric fans and take that huge weight off the water pump snout but I haven't found a way to do it, that I like. I was wondering for info to install a pusher fan in front of their a/c condenser that comes on with the a/c system. I would imagine it causing any problems while driving, seeing as a bunch of cars have pusher fans and I could only think it would support the cooling system.
View 14 RepliesFord Super Duty (1999-2016) :: 2014 - Addition Of Up-fitter Switches?
I just bought a 2014 F-250 with out upfitter switches, how hard it would be to add them now? and if the wiring is there?
View 7 RepliesFord Super Duty (1999-2016) :: 2010 - Remote Start Addition?
the stealer says that since I already bought the truck that it would cost a lot for them to put one on for me. i figured it would be a cheap mod for a stealership to do on a new truck. i guess it shouldn't be too surprised. thoughts?
View 14 RepliesFord Super Duty (1999-2016) :: 2015 - Addition Of Programmer / Tuner?
I just bought an 2015 F250 4x4 6.2L (gas) I am thinking about buying a programmer/tuner for it. I am planning on taking the truck pulling a 28' camper to Florida this summer. My goal is to get the most gas mileage I can out of the truck.
View 7 RepliesFord Super Duty (1999-2016) :: 2003 - Addition Of More Power That Won't Break The Bank?
I've got a 2003 F350 dually and wanna add more power that won't break the bank. What are some cheap things to do.
View 8 RepliesFord Super Duty (1999-2016) :: Reverse Camera Won't Work
I have recently put a platinum tailgate on my 2012 off a 2014 and for some reason the camera no longer works just wonder why this is and how I fix it....
Click the image to open in full size....
Ford Super Duty (1999-2016) :: E350 - Backup / Reverse Lights Not Working
1999 E-350 Super Duty (figured the problem would be the same for van/truck)
Problem: Backup lights don't turn on when in reverse.
Diagnosis: Changed the fused (because it was bad) but didn't fix it. The bulbs are both good. Brake lights, turn signals all work. I understand the backup lights are connected to the Neutral Sensor Switch. To test to see if the NSS was working, I put the van in Reverse and cranked... Van didn't crank (and likewise for D, 1-3).
So I guess the Neutral Sensor Switch works. The fuse works. The bulbs are good. Haynes doesn't have much as far as troubleshooting for this issue. What should I look at from here?
Ford Super Duty (1999-2016) :: 2011 - Backup Lights No Longer Work?
I screwed up installing LED taillight assemblies in my 2011 SuperDuty and pinched a couple of wires against the body. The result of this (at least I think that this cause) is that my backup lights no longer work - neither the backup lights in the tail light assembly nor the reverse light power on the trailer plug. I have checked the fuses, etc. and nothing. I brought it to a local shop and they could not figure out the problem, either, but said that it was probably the "control module" that got fried when the wires got pinched. They said to take it to the dealer. The questions are, what "control module" might they be referring to, or what to check?
View 1 RepliesFord Super Duty (1999-2016) :: Continuous Beep In Back Up Camera
I have a 2014 F-250 6.7 crew cab. Noticed today when I put the truck in reverse there's a continuous steady beep where as before the beep was intermittent, as I got closer to the object it would become faster until it would eventually become a steady beep. Which I'm sure was working correctly. Tried cleaning the Camera lens but it didn't work, it continued the steady beep now I'm worried.
View 14 RepliesFord Super Duty (1999-2016) :: 2005 - Back Up Camera Installation?
I've been wanting to install a back up camera on my truck for quite some time now. A month ago I backed into a steel pole in a parking garage and trashed my bumper, making me realize I need a backup camera I ordered a cheap ebay camera and 30 feet of extra power and video cable for the install.
Down the road I'll order something better but for now I'm working with a cheapo 15 dollar camera I know where I'm mounting the camera and where/how I'm running the cables, I'm just not sure how to get my head unit to switch automatically when I engage the truck in reverse. I have a pioneer double din touch screen radio as seen here on crutch field.
[URL]...
Ford Super Duty (1999-2016) :: Camera Monitor Keeps Falling In The Heat
I installed a Hopkins back up camera early last year. The original double sided tape that holds the monitor to the windshield didn't hold up long. Tried some of the gorilla double sided tape. A couple weeks max. Then I tried the 3m double sided tape. It would work a month or so. Did good all winter, but now I'm going to have to redo it for a 4th time already this year. It sticks to the glass, it's pulling loose from the plastic mount made onto the monitor.
View 3 RepliesFord Super Duty (1999-2016) :: 2011 - Nav Install - Camera Redirecting?
I have recently upgraded the factory sync system in my 2011 f350 lariat to a factory sync with NAV. I am looking for tha way to redirect the fideo feed to the rear view mirror to the nav system, I have found the wire coors and pin locations for the radio end, just need the info if there is a way to move it in the a pillar harness on the passenger side to the radi harness.
Did ford really put 2 different harnesses in the cab if you had nav or not? Factory nav unit and factory camera (camera was in the vehicle to begin with). the radio side is pin 1 and 6 on the 10 pin radio harness.
Ford Super Duty (1999-2016) :: Text Message Alert Overtakes Backup Cam Screen
When I first start my truck (13 SD, 6.2 with Sync touchscreen) and shift into reverse with the backup camera screen showing and if I happen to get a new text message, the alert pops up on top of the camera image. If I click nothing at all (often don't have time to, notification is short), the home screen quadrant will then appear on top of the backup camera image with a small sliver of the camera image on top and bottom behind the home screen. If I shift out of reverse and back to reverse, I get the backup camera screen back.
Since my "deleting" messages on my truck doesn't do anything with my phone (Nexus 5), I get this problem every time I start up and go into reverse unless I wait for the alert to pop-up first and ignore it.
This started happening with the latest Sync update and I checked for any new updates, none to be had that I can see. I had it into the dealership yesterday who said they couldn't duplicate the issue although they failed to ask me to demonstrate to them with my own phone. Being I've had trouble with them in the past, that part was partly my own fault for "testing" them on that. I fail to see how a setting in my phone could control the screen behavior like this though, so I don't buy it.
With a handful of other problems related to that darn touchscreen, I've just disabled bluetooth syncing likely for good. It's pretty darn terrible.
Ford Super Duty (1999-2016) :: Replaced Stolen Tailgate / Camera Not Working
I left town and accidentally left the tailgate on my 2011 F250 SuperDuty unlocked. It was stolen.
Found a replacement, replaced the broken handle, installed new key lock, transferred to camera and plugged it in. My rear-view mirror is not receiving the signal, just a blue screen. Is there something else I need to do to complete the process of connecting the camera.
Ford Super Duty (1999-2016) :: 2014 F350 - Reverse Camera Wiring
On one of the trucks in work, the salt has corroded the truck side plug for the reverse camera in the tailgate. Because of this, the camera no longer works.
Is this part of the whole rear wiring harness, or it the tailgate plug a separate pigtail that can be replaced? If it is a separate part, what is the part number so I can order it?
Ford Super Duty (1999-2016) :: 2015 F250 XL - Back Up Camera Installation
First tech post for my new truck. I just bought a hold-over but new 2015 F250 XL Supercab 2wd and love the simplicity of no unwanted options. That said, there are two features I am adding. The first is perfectly straightforward, cruise control (swap button cluster and have the function turned on by the dealer). The second is a tiny bit more involved, back-up camera, in mirror display with bluetooth hands-free (I like the simple AM/FM radio because I can work it all with gloves on).
So I basically need three things from the truck and my research has been inconclusive on a couple of things because most of the threads are for 2014 or earlier. I think I can pull switched 12V and ground (pin 1 and 4) plus reverse lights (center, or pin 7) all from the the trailer wiring harness. It appears these are not affected by the canbus load restrictions of other places to tap reverse signal (remember, XL so likely nothing in the overhead console for the auto-dimming rear view mirror). Are there any challenges with this when I do hook up my enclosed trailer or when it is not hooked up regarding the trailer brake controller/anti-sway?
I already found a good youtube video for how to route the wires so I think this is my primary challenge at this point.