Ford Super Duty (1999-2016) :: 2011 F250 - Front Grille Replacement Clips Broke?

I have a 2011 f250 sd that I removed the front grill and noticed 3 of the clips that hold the lower part of the grill in (bolts on the top) are broke. I went to the local Ford dealer for the clips and was told I have to buy the whole complete grille for it. The parts breakdown doesn't show the clips sold individually from the grille.

View 2 Replies

Ford Super Duty (1999-2016) :: Going Down In Wheel Size?

So just as I think I have it figured out what size tire and wheel combo I want to go with, I began thinking about going from an 18" wheel to a 17". I can save some cash, have a few more tire size options and save on tire weight.

I know alot of guys go up to a 20" setup but that's just not my preference on trucks.

Any negative to doing this? 315/75/17 tire size interests me. Had that on a Wrangler and liked the look. Going to look a little more at 17" sizes before deciding.

View 11 Replies

Ford Super Duty (1999-2016) :: Bed Side Sticker Size?

I am looking to replace the 4x4 offroad sticker on the side of the bed and wanted to know the dimensions. I've been looking on eBay because dealer wants way too much for stickers. just want to make sure I get the correct size.

View 5 Replies

Ford Super Duty (1999-2016) :: F350 - Lug Nut Size Info?

I bought a new 2016 F350 SRW and ordered the 17" aluminum wheels with 245 tires specifically to put on my 2005 E250 cargo work van.

I bought 20" Platinums for the F350 and used the existing lug nuts.

Now I need the flat faced washer type lug nuts for the van so I can use the new aluminum wheels. Are they the same thread as the F350?

View 1 Replies

Ford Super Duty (1999-2016) :: What Size Tube To Fit For Brake Bleeder

2010 F250, what size tube do I need to fit on the brake bleeder screw? The tubes I have are all too big and the size marks are no longer legible.

View 4 Replies

Ford Super Duty (1999-2016) :: 2000 - Socket Size To Remove Lug Nut?

What size socket is used to remove a lug nut on a 2000 F350 4X4?

View 6 Replies

Ford Super Duty (1999-2016) :: 2015 - Fuel Tank Size?

It doesn't say on the window and in the owners manual I should have a 23 or a 35. The most I've put in my truck is 29.somthing and I had 3 miles till empty and the needle was in the red. I'm thinking I have a 30 gallon tank but how can I find out for sure.

I have a 2015 F250 6.2L CC SB FX4

View 2 Replies

Ford Super Duty (1999-2016) :: 2003 F350 - Pitman Arm Nut Size?

What size the pitman arm nut is? And where to get one? I am lifting my truck soon and I'm going to double nut that baby on there. I know they're prone to loosening. I just wanted to have all the parts before I started.

View 4 Replies

Ford Super Duty (1999-2016) :: Pan Bolt Size - Rust Started Weeping?

What is the thread size/length of the 20 transmission pan bolts on the 4R100? I am replacing the pan since the rust has finally started weeping ATF, and the bolts need to be replaced as well, they have turned into little rusty nubs. So i want to use stainless ones. I could pull one and go to the hardware store, but what is the size i can stop on the way home.

View 14 Replies

Ford Super Duty (1999-2016) :: Rear Shock Absorber Bolt Size?

What is the size of the bolts on the rear axle that hold the shock absorber? I believe its an M12 x70 mm long??

View 7 Replies

Ford Super Duty (1999-2016) :: 2009 F350 4x4 - 18 Inches Rims - Tire Size?

Im just about due for some new tires before this next michigan winter. I have 18" rims with the stock 275/70s. What size can i go up to with out any trouble?

Also. I have michellin ltx/2 now. Mostly highway miles with some muddy job sites and also to my 8000lb camper 6 times a year.

View 4 Replies

Ford Super Duty (1999-2016) :: F250 - What Size Socket For Center Bearing Replacement

1999 F250 CCSB Lariat 5.4, 2 wheel drive. I plan to replace the Driveshaft Center Bearing in the next few days. What size is the Nut that I have to remove to remove the yoke next to it so I can press the bearing off?

View 4 Replies

Ford Super Duty (1999-2016) :: 2003 F250 - Rear Axle Steel Brake Line Size?

I made a bone head mistake and crunched the steel brake line between the rear axle and the passenger side sway bar mount. Truck is a 2003 F-250 with a 7.3. I would like to go to the auto parts store, get bulk steel brake line and bend it myself. But, I don't know what size the line is or what size the fittings are. Whatare the sizes???

View 3 Replies

Ford Super Duty (1999-2016) :: 2002 - Super Coil Went Out While Driving?

One of the super coils busted while driving my 2002 F250 Super Duty. I drove it for less than 100 ft. before parking it. It made a rapid "check,check,check,check" sound, which I'm assuming was mainly the coil smacking against other parts while loose. It busted near the point where it screws into the motor. I felt like I lost some compression as it drove sluggishly once broken, although I only drove for a very short time. I also thought I may have smelt a slight burning scent, or maybe oil, but didn't smell anything once I got out of my truck. Any problems I should look forward to other than simply replacing this coil?

View 14 Replies

Ford Super Duty (1999-2016) :: Super Loud Clunk Noise Come From The Door When Car Turned On

So the other day i opened the door and heard a super loud clunk noise come from the door and when I turned the car on and pulled hte window down it wouldn't go down all the way, only about 75% of the way so I assumed like BMW cars the window motor died but oddly it continued to go up and down just now 100% down.

Then 3 days later when I came to drive the car again the window went down to the 75% mark and now its jammed there with no movement even if I tried to lift the window up myself. Usually a broken motor allows this to happen but since it isn't budging I am wondering if its an electrical issue with the power window button more than the motor?

I say this because when i try to lower the passenger window from the driver side it works than out of no where on the 3rd time it wont move at all than 5 minutes later it will move or if it doesn't move I just go and pull the window down from the passenger side then I come to the driver side and try it and it works again than it'll stop again. So maybe its the power window control buttons on the drivers side that's failing?

View 2 Replies

Ford Super Duty (1999-2016) :: 2016 - Passenger Seat Rattles / Vibrates Quite Loudly?

I have a 2016 F250 6.2 XLT CC 4X4 that is mostly stock, except I did put on 18x9 wheels and LT275/70/18 Cooper ST MAXX tires. I have noticed recently on hwy driving and even in town driving, that the passenger seat rattles/vibrates quite loudly. Obviously if there is someone setting in the seat, it is just fine.

Is this a common issue? Is there a quick fix (tightening a couple bolts or replacing a couple clips?) Or should I take this back to the dealer for warranty?

View 3 Replies

Ford Super Duty (1999-2016) :: Heavy Duty Rubber Floor Mats With Transfer Case

New floor mats. My truck is going to be 10yr old and has the original King Ranch floor mats. I want some heavy duty rubber ones that will fit around my manual transfer case lever. I ordered the Weathertech digital fit liners and I am not happy with them so they are headed back tomorrow. They have a heavy duty all weather mat but not sure how it will work with my shift lever on the floor. Husky liners/mats look nice and heavy duty but won't accommodate the floor lever.

View 6 Replies

Ford Super Duty (1999-2016) :: Difference Between F250 Custom And Heavy Duty Steering Stabilizer?

Is there a steering stabilizer for a 92 Ford F-250 custom 2wd? and what's the difference between a f250 custom and a f250 heavy duty?

View 2 Replies

Ford Super Duty (1999-2016) :: Dash Swap 1999 To 2008 Model?

I'm thinking of doing a dash swap on my 99 super duty to the 2008 super duty dash, steering wheel, etc. I know the od in my truck is mechanical and in the new one its electronical is it possible to swap without having to redue the whole electrical system and computer? Is the steering wheel going to line up and the ducting? How should i approach the wiring?

View 14 Replies