Ford Super Duty (1999-2016) :: Rear Shock Absorber Bolt Size?
What is the size of the bolts on the rear axle that hold the shock absorber? I believe its an M12 x70 mm long??
View 7 RepliesFord Super Duty (1999-2016) :: Going Down In Wheel Size?
So just as I think I have it figured out what size tire and wheel combo I want to go with, I began thinking about going from an 18" wheel to a 17". I can save some cash, have a few more tire size options and save on tire weight.
I know alot of guys go up to a 20" setup but that's just not my preference on trucks.
Any negative to doing this? 315/75/17 tire size interests me. Had that on a Wrangler and liked the look. Going to look a little more at 17" sizes before deciding.
Ford Super Duty (1999-2016) :: Bed Side Sticker Size?
I am looking to replace the 4x4 offroad sticker on the side of the bed and wanted to know the dimensions. I've been looking on eBay because dealer wants way too much for stickers. just want to make sure I get the correct size.
View 5 RepliesFord Super Duty (1999-2016) :: F350 - Lug Nut Size Info?
I bought a new 2016 F350 SRW and ordered the 17" aluminum wheels with 245 tires specifically to put on my 2005 E250 cargo work van.
I bought 20" Platinums for the F350 and used the existing lug nuts.
Now I need the flat faced washer type lug nuts for the van so I can use the new aluminum wheels. Are they the same thread as the F350?
Ford Super Duty (1999-2016) :: Grille Badge Size?
i know the 05-07 grille badge is 9 inch the 08-11 is also 9 inch and the 11 up is 12 inch
wondered if there was a ford oval that was between the 9 and the 12 inch
Ford Super Duty (1999-2016) :: F350 - Rust Behind Windshield
I didn't get the windshield replaced rusted the whole way across the top of the window. Now to fix it right need a new roof panel. This truck barely see snow if it does it gets washed underneath. gets waxed 5 times a year washed every 2 weeks if not sooner now a spot of rust anywhere else on the body. well the bottom of the tail gate but that was covered by a bedrug. But the windshield has me upset to say the least. Really would like to know if there is a problem there like ford not prepping the metal right since it was a new body style for that year.
View 10 RepliesFord Super Duty (1999-2016) :: 2001 - Rust On Bed Side?
My truck, 2001 F250 SuperCab 4x4 should be delivered any day from the Pacific Northwest. It has Zero rust on it and I want to keep it that way. Unfortunately here in Kansas City, Missouri most of the trucks of this vintage I see have rust around the back wheels on the bed. What steps, if any, can I take to prevent rust on my new truck? I'm pretty OCD about cleaning my vehicles (or anything for that matter, lol) so washing the wheel wells is a no-brainer.
View 14 RepliesFord Super Duty (1999-2016) :: What Size Tube To Fit For Brake Bleeder
2010 F250, what size tube do I need to fit on the brake bleeder screw? The tubes I have are all too big and the size marks are no longer legible.
View 4 RepliesFord Super Duty (1999-2016) :: 2000 - Socket Size To Remove Lug Nut?
What size socket is used to remove a lug nut on a 2000 F350 4X4?
View 6 RepliesFord Super Duty (1999-2016) :: 2015 - Fuel Tank Size?
It doesn't say on the window and in the owners manual I should have a 23 or a 35. The most I've put in my truck is 29.somthing and I had 3 miles till empty and the needle was in the red. I'm thinking I have a 30 gallon tank but how can I find out for sure.
I have a 2015 F250 6.2L CC SB FX4
Ford Super Duty (1999-2016) :: 2003 F350 - Pitman Arm Nut Size?
What size the pitman arm nut is? And where to get one? I am lifting my truck soon and I'm going to double nut that baby on there. I know they're prone to loosening. I just wanted to have all the parts before I started.
View 4 RepliesFord Super Duty (1999-2016) :: Rust Under Rear Window Inside The Cab?
once a year i remove all my seats (yes i unbolt front and rear seats and vacuum real good) and when i lifted the rear bench seat back from the rear wall i noticed THIS to some it might not seem like a big deal but to me this is a HUGE problem, i know my trucks a 2004 but whats gonna happen another ten years from now and longer down the road if i don't stop this now? Im gonna have to be buying or making a repair panel for the rear cab thats what! I plan on keeping my truck forever and buy a new truck down the road so i want this one to last, only thing i can think of is the rear sliding window rubber seal is leaking and letting the water get between the two body panels? From outside where the cab corner meets the center body panel piece none of the factory body sealer is missing or cracked so it has to be the rear slider seal?
View 14 RepliesFord Super Duty (1999-2016) :: Surface Rust On Frame And Axles?
My 02 F-250 (week end truck) has begun to start showing a lot more surface rust on frame and axles. It's about half rust and half black frame. Are there any products that I can spray or brush on that will convert and stop this. ?
View 6 RepliesFord Super Duty (1999-2016) :: 2003 - Rust Rear Fender Well?
I own an '03 F250 and have had it since new. I love the truck, keep it in good condition, and plan on keeping it for at least a few more years. For some time now I've had the classic small spots on one rear fender well. The spots are getting a little bigger and look like they're going to come through soon. I'm not a big fan of fender flares, but from what I understand, that's the easiest way to fix the problem, cut the rust out/seal it, install fender flares. Is there any other way to fix the rust without repainting the whole bed? I don't like fender flares because I think they look a little weird with stock tires and also because it's only one fender that is rusting, but I'd have to install them on all four. If fender flares are the only way to go, any that are small and low profile?
View 14 RepliesFord Super Duty (1999-2016) :: Gasket Falling Apart - Bed Bolt Replacement?
I noticed a thumping sound in the truck bed when I'm driving and took a look underneath. The rubber gaskets for the truck bolt are all rotted and falling apart. Does it have to be replaced?
View 5 RepliesFord Super Duty (1999-2016) :: Triton Engine Bolt Pattern
Need to know if the 5.4 and 6.8 use the same bell housing pattern?
View 5 RepliesFord Super Duty (1999-2016) :: 2009 F350 4x4 - 18 Inches Rims - Tire Size?
Im just about due for some new tires before this next michigan winter. I have 18" rims with the stock 275/70s. What size can i go up to with out any trouble?
Also. I have michellin ltx/2 now. Mostly highway miles with some muddy job sites and also to my 8000lb camper 6 times a year.
Ford Super Duty (1999-2016) :: F250 - What Size Socket For Center Bearing Replacement
1999 F250 CCSB Lariat 5.4, 2 wheel drive. I plan to replace the Driveshaft Center Bearing in the next few days. What size is the Nut that I have to remove to remove the yoke next to it so I can press the bearing off?
View 4 RepliesFord Super Duty (1999-2016) :: 2002 - Stripped Coil Retainer Bolt
I've a 2002 Ford F250 SD with the 5.4 v8. I noticed my truck is missing at aprox 50mph when the truck goes into OD and revving at aprox 1500 rpms. I Changed my spark plugs and cylinder no 6 was fouled. The coil was cracked where the sensor connects to the coil. I used some JB weld to try and repair the crack. My truck is still missing and vibrating at 1500rpms at 50mph. I wonder if I need to replace the cracked coil? my check engine light is not on, but that means nothing.
Also, cylinder no2, I was not able to remove the coil. The bolt is stripped. I just got this truck a few months ago and the previous owner or last person who worked on this truck left me with a stripped coil bolt. Anyway, how do I get this bolt out? I'm afraid to crack the plastic area the retainer bolt threads in to...which is also plastic. I"m not too fond of my ford, at least working on it.