Ford Super Duty (1999-2016) :: 2012 F250 - Rear Blocks Removal
I want to know if there are any issues when removing the rear block, also do I have to put a new block in or can I just leave it out ....
View 12 RepliesFord Super Duty (1999-2016) :: 2014 F350 - Changing Rear Blocks?
I have a 2014 F350 (specs in my signature) and I want to change the 4" rear blocks out for F250 2" blocks to lower the rear of the truck.
Looks like a fairly straight forward replacement but I have a few questions.
Will the shocks need to be replaced? I do eventuality want to replace them as the stock ones are not that great but I only have 2500 miles on them.
When I do order new shocks for my truck after the changing the blocks do I order shocks for a F250?
I would like to go OEM parts for this but I am having trouble finding the blocks and u-bolts that I need. What are the part numbers for these?
Anything else I should know about to do this swap?
Ford Super Duty (1999-2016) :: F550 - Uneven Load On Rear Suspension
I have a new to me 1999 f550 w/ 7.3 and I have installed an aluminum service body with a crane on the passenger side bins. The crane itself weights about 650lbs plus the steel frame it is mounted on (superstructure in the aluminum service body). I'm concerned about the uneven load on the rear suspension. It does sag slightly to the passenger side - guessing 1" - I will measure tomorrow.
1) Should I be concerned?
2) What can I do to correct it? (without just adding weight to counter balance it).
Ford Super Duty (1999-2016) :: F350 - Rear Suspension Clunk Over Bumps / Heaves In The Road
I have a 2005 king ranch and have a clunk coming from the back over bumps/heaves in the road. It doesn't happen all the time but often enough. I just replaced the shocks, that worked a little but didn't solve the problem. Now thinking rear sway bar end links? Anything I can check/inspect?
View 1 RepliesFord Super Duty (1999-2016) :: Truck Pulls And Stops Great But Rear Suspension Is Sagging
I know this has been discussed but I still don't understand. Hence my "dumb blonde" user name.
I just purchased a 2013 super duty f350 extended crew cab DRW.
I also purchased a 42 foot (box is 36) Goose neck Bison LQ horse trailer. Trailer weight is 12048 and tongue weight is 4468. Fully loaded I am about 18,500.
Truck pulls and stops great but it is obvious the rear suspension is sagging.
Now what? Do I need air bags? Timbren? Spring Coils? I have called several installers and they all say something different.
Ford Super Duty (1999-2016) :: 2008 F350 - Noisy Rear Suspension - Creaks / Squeaks And Groans
My 2008 rear suspension creaks and squeaks and groans when I move my horse trailer. Truck has 32k miles, has done since purchase last year, squirted wd 40 and that works. At ford place now, they say it is because I added the ride rite air bags. Told them it made same sound before I installed. What to tell them (tech service bulletins ?) or give up and keep spraying and looking for dry joint?
View 1 RepliesFord Super Duty (1999-2016) :: 2012 - Drive With Rear Driveshaft Removed?
I want to and went to buy a new 2012 F350 leftover - everything is good except that Ford.com says the truck was initially put into service In September of 2012 and therefore my warranty will expire in September of 2015 instead 2016.
Dealer says it's an error and will be corrected AFTER I buy the truck, so far I have been unable to get a straight answer from Ford.
Any information about being able ot change the original date a vehicle is put into service ?
Ford Super Duty (1999-2016) :: 2012 F250 - Rear Seat Removal?
I would like information how to remove the rear seat back on a 2012 F250. I want to remove the head rests and from what I can find out they are bolted solid to the rear panel. I asked the same question earlier and got a reply for 2011, would that be the same? Is there any place I could get a schematic, a picture is worth a thousand words.
View 5 RepliesFord Super Duty (1999-2016) :: 2012 - Metallic Noise From Rear Bed Area
New 2012 SD - Is it normal? Going over road bumps, etc causes a metallic sound, kind of like you had some loose metal in the bed bounding around...except it does it when the bed is empty. At first, I thought spare tire...but it is tight. Springs making noise? My father's 2011 F-150 does not make any noise.
View 4 RepliesFord Super Duty (1999-2016) :: 2012 F250 - Rear Heated Seats Won't Turn Off
2012 f250 diesel Lariat 4dr 4x4. He called me today cause he knows I do all the work on my own F250 diesel. He has heated seats in the back and he said that they turn on by them selves and they won't turn off. He had to actually disconnect the wire harness to get the heating elements to turn off so his wife's friends wouldn't burn their bottoms in the middle of august is Texas.. Any ways, he said both sides are staying on and wouldn't turn off using the switch.
I'm not very familiar with the heated seat wiring, especially for the back seats. I told him their may have been a relay that went bad, but now I"m thinking that they much have a controller or something that is acting up. He said that the front seats are acting normal. Also, he has the touch screen and navigation upgrade as well as auto climate control, not sure if this stuff matters for the back seats though...
Ford Super Duty (1999-2016) :: 2012 F250 - Rear View Camera Activation Wire?
I'm putting a new double din stereo w/ backup camera in my truck, I have everything wired except the violet/white wire (from the stereo) that needs to be hooked to a wire (on the truck) that will activate the camera when you put it in reverse. I cannot figure where this wire is on the 2012 for the life of me.
View 3 RepliesFord Super Duty (1999-2016) :: 2012 F250 XLT - Power Sliding Rear Window Install
I am trying to change out my solid back glass for a power slider that's oem... My question that ford could not answer is, is the wiring all in place minus the switch for the install.. I have a 2012 F250 XLT. I am not even sure where the switch to move the window would go either...
View 2 RepliesFord Super Duty (1999-2016) :: Suspension Stabilizer Bar - Up And Down Play
Checking the front end with the front wheels off the ground I noticed that my Suspension Stabilzer Bar has about an 1/8" up and down play in it. No side to side play at all. I checked the nut on the ball joint and it is tight but wondering if this is why I am feeling a slight tight/loose feeling when going down the freeway at 65.
It has this "tight" or a slight grab feeling when the steering wheel is centered and I move it left or right slightly (like normal steering wheel movement to stay in your lane) I don't feel this at slower speeds 30-40 etc just when I am straight on the freeway at about 65-70 mph.
Ball joints and everything else looked fine, no play noticed. Never had the "death wobble" but having this up/down play in their stabilizer bar.
Ford Super Duty (1999-2016) :: 2002 - Adding Suspension Lift Kits?
I have a 02 f250 powerstroke and I wanna put a suspension lift kit on it I wanna go with a 6 inch lift but I'm afraid if I go any higher than a 4 inch I'll have to change to much. What I would have to change and if I would have to extend any of my brake lines also the truck is a cab and a half with an 8 foot bed so I do have a carrier baring on the drive shaft would I have to change anything with that?
View 14 RepliesFord Super Duty (1999-2016) :: 2008 F250 Vs 2009 F350 Suspension?
I have a 2008 f250 SD, My buddy has an 09 350 SD. He is looking to go to a smaller suspension and I wouldn't mind having a bigger lift. Don't get me wrong, I like where my truck sits, which honestly I am not sure what lift size mine has. Anyhow, will the 350 suspension work on the 250?
View 2 RepliesFord Super Duty (1999-2016) :: How To Lift Suspension To Change Out Spring Bushings
2003 f250 6" lift on 35s. How to lift the suspension to change out spring bushings? Was thinking using two chain falls on tow hooks on the front, any easier, safe, cheaper way. I have a farm jack but need to weld a plate on bottom of it for more support...
View 5 RepliesFord Super Duty (1999-2016) :: 2003 - Front End Vibrates - Steering Or Suspension?
2003 F250 4x4 5.4L with 35" off-road tires.
My problem is my front end started vibrating and got worst over the last 2 months. I noticed my front tires were wearing very oddly. Not the way they would if it were out of alignment. I checked the ball joints and the tie rods and all seem tight. There is no play in the ball joints or tie rods. Now I have noticed that I have play in what I think is coming from my steering gear box. I can wiggle the steering wheel and can hear it rocking but it's not from the gear box down. Could that be the problem or am I missing something. Also when turning out of a Parking lot that has a good angle to it I do hear a pop quite often but have not been able to locate where it's coming from other than it's in the front end somewhere. I just rotated the tires so now the front tires are smooth and worn evenly but I still have vibration just not near as much. It's hard to see in the pics but there's like lips on the end of the tread. The ones that were on the back are smooth and not worn like these.
Ford Super Duty (1999-2016) :: Grind Feeling Through Gas Pedal And Noise From Front Right Suspension
I have a new 2016 F250, few months old, loving life. I noticed a weird noise/feeling when I am making turns while going over a bumps. There is a left hand turn on my way home that I take every day at approx 15 mph. There is a dip in the road and I can feel a weird grind kinda feeling through the gas pedal and a noise from the front right suspension. Being a brand new truck, I'm not sure what the deal is, or if I'm just overly critical.
View 4 RepliesFord Super Duty (1999-2016) :: 2001 - Replaced Hub Bearing / Noise From Suspension Area?
I have a 2001 f250 v-10 4wd with 117,000 miles. I just replaced drivers side front hub bearing assy and not sure if it's the new bearing or what but now I keep hearing this crazy noise from suspension area. It has had bangs and pops for a while now. It almost sounds like abs motor going off but louder. Does it going slow fast or whatever. Brakes on or off. Trucks ball joints were done about two months ago and new shocks, trac bar replaced this summer only thing not done was tie rod ends and all bushings. Brakes are good new rotors and pads this summer also. It's like taking two inflated balloons and rub them together real fast. It may be the timken bearing maybe bad from get go.
View 14 Replies