Ford F-150 (2009-2014) :: RPMs Drops While Shifting?
Used to own a F250 so I am new to the F150. I am currently in a 2014 F150 fx4 with about 10k miles on it. I noticed when the truck is shifting into 3rd (normal acceleration)the rpms once in third remain around 1800 then drop to 1400ish after about 2 seconds or so while still in third (almost like its shifting again). What it is?
View 6 RepliesFord F-150 (2009-2014) :: Vibrating Passenger Seat - Noise Inside The Cab
Since most of us on this forum drive pick-up trucks, we're all accustomed to them riding, well, like a truck. We fully expect them to bounce around a little bit, right? However, one should not expect to be annoyed by noises inside the cab. For instance, my passenger seat bounces around like a baby's bouncy chair, even when the road is smooth. Surely, I'm not the only one noticing this! How do I shut-up my passenger seat???
2010 Platinum 4X4 SCREW
Ford F-150 (2009-2014) :: 2010 - Vibrating Noise Coming From Within The Dash
My 2010 F-150 has a vibrating noise that seems to be coming from within the dash. The noise starts around 40mph to 50mph. It stops if I let off the gas or I accelerate. I cannot figure out where or what is causing this.
View 3 RepliesFord F-150 (2009-2014) :: Groaning Like Humming Noise From Front Axle
My front axle is making a groaning like humming noise when the truck is cold and first starting to drive it. It does it when speeds are at 30 mph and under and goes away when putting it in 4WD. It sounds like the hubs but I'm not sure. The dealer hasn't been able to duplicate it because they haven't kept it overnight. I'm just wondering if this happen to the truck, was it fixed and what was the issue. Like I said, I think it may be a vacuum issue to the hubs, but not sure.
View 12 RepliesFord F-150 (2009-2014) :: 2013 - Humming Noise When Taking Off At Light Acceleration Going Through The Gears
Trans Noise At least I think it’s coming for the trans. Ok here it goes. When I’m just taking off at light acceleration going through the gears I hear what I call a humming noise. It starts off low and as you increase rpms to the shift point it get louder and then start over again. It does this in most of the lower gears, at least what I can hear. As you get going faster there is more wind and tire noise, so I can’t hear it as well. I have heard it at higher speed but conditions have to be right. I found a YouTube vid that someone posted. It has the same noise I’m talking about, he did a great job recorded it. I tried but didn’t have any luck. Anyway he took it to the dealer and they say it was a the separator plate. His is fixed. I did hear that there is a TSB on the Trans for the separator plate but not sure if it is for the same problem I’m having.
2013 F-150 Ecoboost Ext Cab 4X4
Bakflip Bed Cover, Duel Liner Bed Liner
Ford F-150 (2009-2014) :: Ticking Noise At 800 To 1000 RPMs / Rough Idle Leads To Engine Fail
2010 F150 ... So I have the tick noise at rpm's 800-1000 at drive through, stops, etc. So I did research on it a few months ago and saw that it might be VCT's but should be able to drive. so I drove it waiting to save money and have it go to a shop. well this past weekend while coming home from work my oil light came on the pressure dropped to zero, I was on the highway so I drove about another mile to get off highway and once I got off my truck died. I had it towed to my house and I thought I blew my motor. So I started doing research here and found that the VCT's AND cam Phaser could be bad. so I replaced my VCT on driver side put it all back together it started and loud knock was gone. then after 5 mins it was back very loud knock!
So I shut it down and took apart the passenger side once I got the valve cover off I found the problem.... The bolt that holds the cam phaser in place snapped off and was riding along the camshaft. So I took that out and extracted remaining part of bolt. inspected my camshaft and it was really messed up. so I bought new Phaser and Camshaft. the camshaft just came in today and I am trying to put it back in. but the hole for the pin in the phaser doesn't line up and I cant spin the shaft to make it line up. should I spin the cam phaser? I marked the chain and the phaser is where it should be on chain, but with that bolt snapping off could that have thrown the timing off so my mark is no good? when I lay the camshaft in place it sits perfect and if I just move the phase over 2-3 links it will all fit together. Should I do that?
Ford F-150 (2009-2014) :: 2010 - Shaking / Vibrating At Highway Speeds
I have a 2010 F150 XLT crew cab, and I'm the second owner. Ever since I have owned the truck, it has had a pretty bad shake/vibration at highway speeds, that gets worse with higher speed. I have checked the alignment multiple times, rotated tires, had them re-balanced, and I still cannot figure out what is causing this. What else should I be checking?
View 14 RepliesFord F-150 - 1997-2003 :: Vibrating / Loud Noise When Accelerate / RPMs Jumping Around
I have been having some major issues with my truck!
The whole truck is vibrating when on. When I accelerate I hear a loud noise like something is hitting a fan. I'm scared to even drive it. The rpm's have been jumping around.
What could be causing this? I already replaces Fuel filters.
Tiguan :: 2012 - Trans Stays In Higher Gear And Makes Vibrating Humming Noise
We just brought home a new Tiguan 2012 Automatic and when we are in Drive (D) and going about 26-30 mph the transmission stays in a high gear (5th) and makes a vibrating hum.
It happens on a flat road when someone is in front of us and forces us to stay in the 26-30mph range.
It feels like it wont drop back to 4th at this speed and is overloaded in 5th. When we give it some gas it will hum and lag even more then finallly downshift.
Tiptronic and Sport seem fine but Drive does not feel normal in this range.
When we took back to dealer at 130 miles on the odometer, the tech sat in on the drive and experienced the symptom. His conclusion was that the car is in its "Adaptive Learning" phase and it should work itself out after about 600+ miles.
Ford F-150 (2009-2014) :: 2012 - Cold Start Humming Sound
I have a 2012 F-150 Platinum 6.2L. Every morning after a cold start, I get this humming sound until the engine heats up. It does seem to get a little quieter when I'm moving but not much. This only happens after the first start of the day and has only started doing this since it's been cold (20-30 F).
YouTube ......
Ford F-150 (2004-2008) :: Humming / Rubbing Noise Under The Hood When Come Across 1000 RPMs
I put a link below on the video that I made. But when I come across 1,000 RPMs weather I turn, go straight, left or right it makes this noise like a humming or rubbing noise. I took it to the dealership and they fed me crap saying when it gets worse or when it happens every time brig it back.
[URL] ....
I don't think this link is working I'm trying to figure out this iPhone. Search my YouTube channel Kill3rcr3w that's the channel I just uploaded it
GTI 337/20th Anniversary :: Vibrating Noise Coming From Turbo When Rev Up To And About 2600 RPMs
When I drive my car past about 3000 rpms then let them fall i hear an odd sort of vibrating noise coming from the turbo between where ever I rev it up to and about 2600 rpms. Is this normal? Its fairly quiet and can only be heard without the radio on and if your listening for it. This worries me because I've only had this k03 for about 5000 miles .Some background info I am chipped with uni at 20psi, full 3" turbo back and an 007 dv.
View 3 RepliesFord 6.0L Power Stroke Diesel :: Turbo Is Whistling / Also Getting Humming Noise When Downshift At High RPMs
I have 2003 f250 6.0, had the turbo rebuilt and I put it back in, my turbo is whistling but I'm also getting a humming noise kinda sounds like a when u down shift at high rpm's idk what's going on, I try and power break as well to build up boost and the tires do not even spin...
View 4 RepliesIS F (2008-2014) :: Burble / Popping Out Of Exhaust When Shifting At Certain RPMs
So I just wanted to ask 2 things.. Am I the only person who purposely shifts at certain rpms from 1st-2nd just to hear the burble/popping out of the exhaust.. I hold it around 3k and the shift and let off the gas and it's a Orchestra of amazing noises that are Oh so addicting. Secondly, are there any negatives to doing this... Or that sometimes I hear the loud thud/pop when slowing down but not every time... What is the true cause of these glorious noises.
View 8 RepliesFord F-150 (2009-2014) :: After Shifting Lose RPM?
I have a 2014 F150 ecoboost with a 3 inch lift and 33 inch tires. It seems that in every gear minus 6th that when I shift it shifts to normal RPMs then the truck sort of bogs down, losing 300 or so RPM, then keeps going like nothing ever happened. There are 58,XXX miles on the vehicle. I have taken it to Ford multiple times, now they are saying I probably need an aftermarket tuner to take care of the issue because of the bigger tires.
View 3 RepliesFord F-150 (2009-2014) :: Bucking At Lower RPMs
This is not on our F150, but rather our Flex that has the 3.5 Ecoboost.
Recently we have been having a bucking problem at lower rpms. Usually when taking off and hitting a slight grade. Doesn't really have a problem at highway speeds. Usually only on takeoff when it shifts through the gears. If you accelerate more, you can stop it for the moment. Weather doesn't make a difference. Also can feel a slighting surging sometimes and can see it on the tack. Like a 2 sec alternating surge. Doesn't do this all the time though. I have replaced plugs with iridium, gapped at 34.
I also purchased two motorcraft coil packs and installed them in different configurations as to see if I could isolate it. No change. I HAVE NO CEL YET. At all. Wish it would! I have tried to make it buck hard enough to throw the code to no avail. I have heard of condensation in the intercooler, but from what I have read it is a higher RPM symptom..This feels just like the COP problem on my 5.4. Unless I have 3 or 4 bad COPS and no CEL. If I could just get a code.
Ford F-150 (2009-2014) :: Rough Shifting 2nd To 3rd Gear
For the last few months my truck shifts rough between 2e and 3e gear. However it only does this first thing in the morning, when I leave the house I speed up until the end of the street, then when I let go of the gas it'll rev up a bit and shift from 2e to 3e while making a big clunking noise which I can definitely feel ...
It does it sometimes very rough and sometimes just a little bit. I used to not worry about it but i'm starting to wonder if something is wrong with my trans. Could it have something to do with the slip yoke?
Truck: f150 2009 xlt 4x4 supercab 6,5' box.....
Ford F-150 (2009-2014) :: In 6th Gear Engine RPMs Jump By 500?
Basically, when I just cruise in say 6th gear, and then step a little on the gas (or there is a hill), the engine rpm's jump up by like maybe 500 rpm's without a noticeable increase in speed, and there is no downshifting either.
I am sure this is normal, right? So what is the transmission doing? Coming from manuals only in the past, this seems strange.
Ford F-150 (2009-2014) :: 2011 FX4 Ecoboost Not Shifting To 6th Gear?
I just picked up my 2011 FX4 Ecoboost with the 4.10 axle ratio. While in drive, the transmission will not shift into 6th gear until around 65mph. The rpms in 5th gear at this point are around 2300(ish). If driven with Tow/Haul mode on it will shift into 6th at 45mph and lock the converter. If traveling at a speed in drive (no T/H) where you would think it would be in 6th, lets say 50mph on flat ground, and you force the trans into 6th, either by using manual mode or T/H, and then return the transmission to normal drive mode it WILL hold 6th just fine with the converter locked and will even accelerate holding 6th.
If you accelerate more rapidly and the transmission downshifts, it will not return to 6th until forcing it to do so by one of the two ways above. I realize that the truck has adaptive learning strategies, but this doesn't seem right. It also has only 300 miles. Initially I had even thought that this might be some sort of break-in programming, but not anymore.