Ford F-150 (2004-2008) :: Engine Swap From 2005 Model To 2010 F250 5.4?
Will an engine from a 2010 f250 5.4 work in my 2005 f150 5.4? f
View 7 RepliesFord F-150 (2004-2008) :: 2006 Model Receiver Hitch Will Fit On Truck?
I have a 2004 Ford F 150 and I was wondering if a receiver hitch off of a totaled 2006 would fit on my truck?
View 4 RepliesFord Super Duty (1999-2016) :: Dash Swap 1999 To 2008 Model?
I'm thinking of doing a dash swap on my 99 super duty to the 2008 super duty dash, steering wheel, etc. I know the od in my truck is mechanical and in the new one its electronical is it possible to swap without having to redue the whole electrical system and computer? Is the steering wheel going to line up and the ducting? How should i approach the wiring?
View 14 RepliesFord F-150 (2004-2008) :: 2006 - Coolant Leak At Intake Manifold
I have a 2006 F150 screw 4.6 auto 116k miles that has evidence of a small coolant leak where the intake manifold joins the head. This is on the drivers side directly under the thermostat housing. The t-stat housing is dry and the hoses all appear dry. It's just wet right at the gasket where the manifold joins the head. Reservoir is still normal so it's not leaking too much just yet.
I searched this site and youtube but didn't find any other posts. Lots of problems with older trucks with composite manifolds but nothing for this one. It looks like a part of the bottom of the manifold is plastic but the entire top and where it is leaking is all aluminum.
It seems odd that this would start in the winter time just driving back and forth to work (no load). And, yes the antifreeze is good. Just wondering if this is a known issue with this truck. Is it just a matter of replacing the gaskets or is there some other flaw I should be concerned about?
Ford Ranger / B-Series :: Door Swap From 1992 To 1993 Model
Will a driver door from a 92 ford ranger fit a 93 ford ranger?
View 5 RepliesFord Ranger / B-Series :: Motor Swap From 1994 To 1987 Model?
I have a 1987 ford ranger, it has a 2.0L carborated motor and I also have a 1994 ford ranger fuel injected motor I believe it's a 2.3L, I am wondering if the swap will work to put the 94 motor in the 87....
View 3 RepliesFord F-150 (2004-2008) :: Will 2010 Mirrors Fit On 2008 Model?
Will mirrors from a 2010 FX4 fit on a 2008 60th anniversary?
View 10 RepliesFord Super Duty (1999-2016) :: Mirror Swap To A Smaller Model?
I have a 2016 F250 XL and I want to put smaller outside rear view mirrors on her. I thought I can't be the first person to want to do this but repeated searches haven't turned up a bit of information.
I have the stock XL black plastic tow mirrors. They are manual extension and manual fold in. No heat, no lights, nothing. I want to go to a smaller, non-towing mirror like comes on stock F150's, chrome would be OK. In about 18 months I will want to go back to my trailer towing setup. I need to be narrow for a while.
Ford Super Duty (1999-2016) :: Automatic Transmission Swap 2000 F250 To 2003 Model?
I have a 2003 f250 4x4 with a 5.4 motor the automatic trans is shot. I can get a replacement trans from 2000 f250 4x4 with the v10 motor. I tried my best to research it bell housing supposed to be the same so it should fit. But I'm not sure what they changed in those years internally or electronically.
View 2 RepliesFord F-150 (2004-2008) :: Swap 2007 Vin 5 To 2008 Vin V 5.4?
I am looking to swap 2007 vin 5 to 2008 vin V 5.4. Just wondering what would need to be changer? Would the ECM need to be replaced? I believe the vin V is flex fuel.
View 3 RepliesFord F-150 (2009-2014) :: Intake Manifold Swap?
Will an intake manifold from a new mustang 5.0 fit on a 2014 F150 5.0?
View 3 RepliesPassat (B6) :: Is 2008 Better Than 2007 And 2006 Model
I remember reading that some common problems that plagued the 2006 Passat have been removed or rectified for 2008. what was improved or rectified in 2008 over '06 and '07?
I'm planning to trade-in my '06 Passat for '08 if I can find a good deal and would like to know the above.
Passat (B6) :: 2008 Faster Than 2006 Model?
Ok so I dropped off my 06 at the dealer for some warranty work and got an 08 for a loaner. They are both 2.0t tips. The 08 is a ton faster than my 06. It spins the tires all thru first gear if you turn off the esc and stand on it from a stop. I thought mine felt good but this one is better.
View 19 RepliesFord F-150 (2004-2008) :: 2005 - Instrument Gauge Cluster Swap?
I found a instrument gauge cluster out of a 2005 XLT that I would like to put into my 2005 XL. It has the tach that I miss. The mileage is less. Will I have any problems switching them - i.e.,: lights not working, etc? Will the onboard computer correct the mileage?
View 4 RepliesFord F-150 (2004-2008) :: 2007 - Swap Power Mirrors With The Blinkers
I just got an XLT with basic power door mirrors, I'd like to swap to power mirrors with the blinkers. The million dollar question is, does the truck already have the correct wiring harness for a "plug-and-play" or is the wiring not there for the blinkers?
View 3 RepliesFord Wiring/Electrical :: 2004 F250 Steering Column Swap To 2008?
I have a 2004 f250 I just purchased a complete 2008 dash with steering column, wheel everything. I also installed the 08 door panels. I would love to keep the newer column and wheel. I'm not worried about the wiring. Just need to know the wiring colors or numbers for each truck to match?
View 2 RepliesFord F-150 (2004-2008) :: Intake Manifold Replacement?
Looking for any pictures or directions on replacing the intake manifold on the 2004 F150, 5.4. Got all the parts with the pulgs, and ignition coils.
View 6 RepliesFord F-150 (2004-2008) :: Codes P0053 / P0132 / P2195 And P2196 After Manifold Swap
Had my friends shop replace my passenger side exhaust manifold on my 2004 FX4. Two studs at the front broke flush and one other broke but was sticking out of the head. To get room they did the trick of unbolting the trans mount and the passenger side engine mount and moved the engine over. All is back together but started throwing the 53,132, 2195 and 2196 codes, engine seamed to run fine though. Before bringing it back in I decided to check for any simple things, vacuum leaks or connectors that might have been knocked loose. At first I thought this was a good candidate for a vacuum leak but it turned out to be a vent for the front hubs.
My next thought was that maybe the pass side upstream oxygen sensor got knocked during the work and was now shorting out. It is very tight on that passenger side! Truck has 102,000 miles so they were at the end of their lives. I decided to just replace all 4 with OEM units. I used one of the oxygen/mapp gas torches from the hardware store and a 7/8 in wrench. The drivers side was easy and I did not have to remove the drive-shaft like some write-ups discussed.
Although doing that would give plenty of room. Pass side downstream is fairly easy, upstream was a bit tougher. I took out the inner fender skirt and loosened the trans dipstick tube. That gave just enough room for my large hands to reach in and turn the connector so the sensor side of the plug faced out. I used a pick and fashioned a hook out of a coat hanger to pull the connector apart. That ended up being the hardest part. Putting a good amount of heat into the sensor bung quickly made all the difference in getting them out.
Here is what the upstream pass side sensor looked like. Could not see it from below or from the wheel well.
The codes are all gone now (were coming back after one drive before) so I think the sensor was the issue.
Prius (2004-09) :: 2006 Interior Fit In 2005 Model?
I am wondering if the 06 interior will directly fit in an 05? examples are door panels and dash components..basically I'd like to change from the brown to the black material found in 06+....
View 1 Replies