Prius (2004-09) :: 2008 - Headlight Assembly Replacement
The drivers side headlight assembly on my 2008 Prius has moisture in it. I have 52,000 miles on the car, so I do not think it is covered under warranty. What / how can you replace the headlight assembly?
View 7 RepliesPrius (Gen 3) :: Removed 3 Bolts During Headlight Assembly Removal
I've removed 3 bolts ( Headlight assembly removal)and loosened the number cover to be gridlocked by something I cannot see or just a bit more friction than the amount of force I'm willing to give for fear of breaking something.
View 9 RepliesFord Super Duty (1999-2016) :: 2008 F250 - Hub Assembly Removal
I am trying to replace the ball joint on my 2008 f-250. Does the hub assembly come off of the knuckle or do you remove the whole knuckle and hub assembly together? If you have to remove the hub assembly what is the best way?
View 14 RepliesLexus RX 2004-09 :: HID Headlight Assembly Replacement?
My headlights suffered from the dreaded condensation problem. I brought them to Lexus after getting the warranty enhancement paperwork and had them replaced. Shortly after the passenger side wheel cover was ripped off after getting caught on some ice during a storm. It was very shortly after that that condensation begin appearing in my passenger side headlight.
At that point I was unaware that the wheel well cover had been ripped off. I brought it back to Lexus to have it looked at since I only had the headlight replaced a few weeks before. I was told it would be at a cost of $2,500 to replace with an additional $400 for the wheel well cover. Needless to say, I did not have the work done that day. While I was waiting them for them to finish the paperwork I bought the wheel well cover for $50 online but since then I've had difficulty locating the headlight.
I brought it to my mechanic and he was unable to find the headlight as well. I have a 2009 rx350 with HID AFS headlights. I have looked on ebay, Amazon and just through the internet to see what I could find but I'm finding only halogen headlights. Most of what I'm seeing on eBay are for non-adaptive lights that are damaged.
Sebring - Chrysler :: 2004 - Stuck Wheel Bearing Assembly Removal?
I'm attempting to replace a front wheel bearing and hub assembly on a 2004 Chrysler Sebring. I've removed all the hub bolts and all other more external components. I've tried hammering the assembly, reinserting the bolts partially and hammering those, a slide hammer, liquid wrench...
View 9 RepliesGolf IV / Jetta IV :: 2004 GTI 1.8t - Car Not Turning Over After Replacing Headlight Assembly
So car not turning over after replacing (right side) headlight assembly. Was turning over prior. Replaced the battery, same result.
View 4 RepliesPassat (B6) :: 2008 V6 - Headlight Switch Removal
How do you remove the headlight switch on a 2008 Passat B6? i tried pushing it in and turning it right, but i still cant pull the switch out. Am I doing something wrong, or does it not come out on this model?
View 6 RepliesFord F-150 (2004-2008) :: 3rd Brake Light Assembly Replacement?
How to access the plugin for the 3rd brake light, cant seem to find it from the top, do I need to remove the headliner?
View 2 RepliesFord F-150 (2004-2008) :: 2006 XLT - Replacing Wheel Hub Assembly?
I've got an 06 XLT 4x4 with the 4.6L. I'm replacing the wheel Hub bearing assembly this evening and got the old one removed. Opened the new on to find no grease! I was shocked considering I just replaced the IWE and they come pre-greased. I plan on adding some grease around the hub gear but wondered if i should some how get grease in on that inner needle bearing? I have to have this put back together in a couple of hours so I can drive to work tomorrow.
View 6 RepliesFord Excursion :: 2001 - Headlight Assembly Replacement
I have a 2001 Excursion and I need to replace my headlight assembly. What is the difficulty level of replacement? Any recommended assembly they would suggest that throws out some great light?
View 14 RepliesFord F-150 - 1997-2003 :: Headlight Adjuster Assembly Broken
I have a broken headlight adjuster assembly, it's a steel bolt with a Plastic nut on it, the Star piece behind the nut is broken. What is the source for this part ?? A Ford part number????
View 4 RepliesSonata I45 (YF - 2011+) :: Fog Light Assembly Removal
How to remove the fog light assembly on a 2013 Sonata.
View 5 RepliesPassat (B6) :: Side Mirror Assembly Removal?
Looking for a DIY for removing the side mirror assembly? I have to replace the whole thing.
View 12 RepliesCamry 2012+ :: Front Map Light Assembly Removal
How to remove the front map light assembly. I was trying to replace my map light with LED and one of the holder came off from the assembly. Is there anyway to secure it without removing assemble?
View 1 RepliesPassat (B5) :: Center Dash Vent Assembly Removal?
How to remove the center (upper, right above the radio) dash vent assembly on an '04 Passat (I assume many other years would be similar). I have a rattle/squeek in there that I'd like to address. Sliding a credit card in between the vent/dash provides some improvement, so I'm thinking if I could get the assembly out and shim and/or lube it I might be able to resolve the problem.
View 2 RepliesTouareg :: How To Remove Headlight Assembly
I can see where there is a 1/4 inch post that if turned will push the assembly out, but i can only get it to come out about 1 inch. Is there something else that has to be released ?
View 2 RepliesCamry :: 2007 / Headlight Assembly Replacement?
I'm trying to replace my dads 2007 Camry XLE japan built headlight assembly because his are insanely oxidized. Besides OEM's and CAPA's, what else are there? Any good aftermarket headlight assembly and achieve great results?
View 8 RepliesPassat (B5) :: 2000 - How To Get Inside Of Headlight Assembly
New owner of a 2000 Passat. The headlights are dingy on the inside and I would like to be able to clean them. How I can get to the inside of the headlight assembly? Can't stand the look of them like this!
View 13 RepliesFord F-150 (2004-2008) :: 2005 4.6L - Removal Of Oil Pan?
2005 f150 4.6l up on jack stands right now with the oil drained and a few bolts out of the oil pan. It looks like I have to take the cross section out to get this to even move but I don't know if that's going to be enough. I'm sort of running trial by error here but hoping I don't do something I cant put back together. I'm assuming ill be okay to take the cross section out but I don't know if I need to move the differential to get it out. My oil pan gasket is leaking and I'm trying to replace it.
View 4 Replies