Ford F-150 - 1997-2003 :: 2002 - Rear Axle Drum To Disc Brakes
I got a 2002 f150, right now it has a 9.75 with disc brakes. But it exploded. I can only find a 9.75 with drums in the wrecking yard. Can I just swap my disc brakes on to the axle with drums?
View 1 RepliesFord Brakes/Suspension :: 1997 F150 - Converting Drum Brakes To Rear Disc Brakes?
I have a 1997 F150, 4X4. My mechanic says its time for new brakes and was curious if it would be worth possibly converting from drum brakes to disc brakes??
My mechanic has quoted me $300 to do the rear brakes, would it be worth the extra money to convert??? I really don't care for drum brakes. I have done a search on the internet and every time it brings up the issue with the parking brake.
Accent MC (2006-11) :: Rear Drum To Disc Brake Conversion
I bought my accent in 2006 and it came with rear drum brakes and I want to know if it is possible to switch to rear disc brakes. I know that newer accents have all disc brakes so maybe it wont be that hard, but what do I need? I dont have abs. I asked the dealer like a year ago and they told me they wont do it. I have seen this conversion before in other cars that did not have rear disc brakes in newer versions either.
View 91 RepliesFord F-150 - 1997-2003 :: Rear Drum Brakes Locking Up
I'm having a problem with my rear drum brakes locking up when I press the brake pedal. I've had this problem before, but ignored it because it wasn't too bad. It would just release after taking my foot off the brake pedal.
1998 F-150 XLT supercab 4x4 front discs, rear drums 4.6L v8 175k miles
I cleaned my master cylinder and bled all brake lines so they have fresh fluid. Now that my brakes work way better, my rears just lock up. I put new brake cylinders on, still locking up. I went to a junkyard today and replaced the proportional check valve, brakes still locking up.
Could I maybe have did something wrong when cleaning the master cylinder? I'm sure I put it back together correctly. Anything else i should look at? bad lines maybe?
Ford F-150 - 1997-2003 :: 2002 - Have Rear Disc Brakes?
I have 2002 f150 XL 4.6 L 2 wheel drive.Do i have rear discs?Need to change them not sure what to buy.
View 5 RepliesFord F-150 - 1997-2003 :: Rattle When Going Over Uneven Roads / Rear Disc Brakes Noisy
I've had this "rattle" when going over uneven roads for about the past few months and I think I narrowed it down to the rear calipers. They are both tight, but it seems as though the "floating" ability of the caliper is loose.....does that make any sense? I mean you can grab the caliper and it'll make a rattling noise, but the bolts are tight..
View 5 RepliesCorolla / Matrix 2009-13 :: How To Change Drum Brakes To Disc
I bought a 2012 Corolla S and I feel that the rear brakes are a little cheap. Has swapping brakes but how?
View 3 RepliesFord Brakes/Suspension :: 1997 F250 - Passenger Side Rear Drum Brake Was Full Of Oil
Recently purchased my first Ford truck, a 97 F250 w/7.3L diesel. I discovered the passenger rear drum brake was full of oil. Cleaned it up and put it back together to do some research.
I see how the hub comes off and there are two bearings in it an an oil seal. The bearings are lubed in wheel bearing grease. Does differential oil circulate through the bearings too?
It doesn't look like a difficult job. Do the seals go bad often or could this be due to a clogged differential vent? Truck has only 100k miles. Any gotchas I should be aware of?
Ford F-150 - 1997-2003 :: Front Disc Brakes Not Working
What would cause my front disc brakes not to work. I have replaced the master cylinder, calipers, hoses and pads. Backs work fine but I can not get good pressure to the front. 1993 f150 5.0 ..
View 1 RepliesFord Ranger / B-Series :: Rear Drum Brakes Not Working
Received the truck, 1989 Ranger XLT long bed single cab from my mom. It had been used by my younger brothers for some years, and then sat at mom's for a couple years.
It needed new front brakes badly, so replaced rotors, and pads. No unexpected problems there.
Looked at replacing the rear. Both adjuster cables were initially broken, so they obviously weren't adjusting, or braking. Replaced with a hardware kit, and shoes, and drums. Its the 9" drums, BTW.
Still not actually braking. I can tell this, when at a stop sign in the winter, with the brake pedal held down, and the backs will still spin, with the tranny in D. Even on gravel or grass, this'll happen.
One shop told me this is because the axle seals are leaking. THey've never leaked badly, and the axle fluid isn't low, by and shade of the imagination. Also, this theory falls apart, when the parking brake works just fine, right? Its just hydraulically that they don't work.
I've since replaced the wheel cylinders, the brake line from the frame to the rear axle, and the master cylinder. No change. Bleeding them doesn't seem to be a problem; i.e. no lack of or little fluid witnessed, it seem fine.
Also have bypassed the RABS valve for about a year or so, and its made no difference. Last fall I pulled the drums off, and manually adjusted them, and it didn't seem much better either.
Camry :: Rear Drum Won't Go Back On - Brakes Are Too Far Out
I didn't put the rear drum on while adjusting the rear brakes, now the drum wont go back on because the brakes are too far out. How do I get my drum back on! This is on a 2002 Camry LE
View 6 RepliesHonda - Cr-v :: 2000 - Rear Drum Brakes Making Noise
I have a 2000 CR-V with rear drum brakes that make quite a bit of noise. When I press the brake pedal, they make a noise like the shoes are grinding on something other than the drum itself. Also, when I press the pedal at the right amount of pressure at the right speed, I get a loud high pitched squeal as if there's a metal tab rubbing on the drum. I did this brake job with my dad about 6,000 miles ago (154xxx miles now) including the front pads. We did everything right and bled the brakes VERY thoroughly.
We used the same drums as before (however, we replaced the front disc rotors) and everything is how it should be. I even adjusted the shoes' pressure on the drum a bit to see if it would stop. Also, the squeal noise seems to be worse when I haven't driven the car for about 2 hours or in the morning when it's colder and the brakes haven't been used in several hours. What's causing these noises?
Passat (B5) :: Changing Pads On Rear Disc Brakes
I am trying to change pads on the rear disc brakes. I got everything apart but can't get the piston to retract to get the new pads in. I am turning the piston clockwise with needle nose plyers and it isn't retracting. What do I need to do?
View 7 RepliesElantra XD (2001-06) :: Disc Brakes - Rear Right Wheel Is Overheating
I have Elantra GT 2006 with traction control and ABS, disk brakes. The rear right wheel is overheating. Checked if sliding pins are moving. They were fine. With working engine if brake pedal is pressed wheel does not move, pedal is released and wheel can rotate. Three days ago I replaced rear right caliper together with the caliper hose. It did not work. After driving in city for 15-20 minutes right rear wheel will be hot to the point that you cannot hold your hand (left rear and front ones are barely worm). I tried to remove the fuses for ABS and it did not work.
View 6 RepliesFord F-150 - 1997-2003 :: Drum Brake Adjusting Lever?
Just need to know how common this brake adjusting lever is? Awhile back I rebuilt my whole brake system and for some unknown reason the DS rear drum brake wants to keep over adjusting. Checked and double checked everything but can't see what would be causing it.
The fix has been to pull the wheel and drum and back off the adjuster but that's getting old. If I had more time and enthusiasm, I'd switch the shoes and hardware side to side to see if the problem follows the hardware. My solution for now is go with manual adjustment and to disable the DS adjuster by cutting off the end of the lever.
Before I hack up a lever I'd like to have a back up in case there is any problem. Not sure if the junkyard will have what I'm looking for and don't see the correct style lever on Rockauto or at my local parts places. My luck is to cut up a part that's hard to find.
Ford Brakes/Suspension :: Consistent Squeaking Coming From Back Drum Brakes When Pedal Is Applied
After putting my Ford Ranger in park and pressing down on the E-break to get the news-paper or mail. I've noticed that there is a consistent squeaking coming from the back drum brakes when the brake pedal is applied. But only for a certain period of time; then the squeaking stops.
View 8 RepliesFord Brakes/Suspension :: 2002 - Deleting ABS System 2wd All Disc Brakes?
Im wanting to delete my abs brake system in my f150 2002 2wd all disc brakes.
I have to change the module with some kinda valve? and turn off the Abs in a tune?
I know the basics of a brake system, but im lost in the abs stuff.
Ford F-150 - 1997-2003 :: 1999 - 2004 Radio Can Work With 6 Disc Changer?
Can I or could I make an 04 Radio with a 6 disc changer work in a 1999 F150. The radio in the truck now is having some issues and I don't want to put an after market in so I am just wondering if it could work.
View 2 RepliesFord F-150 - 1997-2003 :: Rear Brakes Have More Power Than Front And ABS Code
So when I got this truck everything on the brakes were messed up. So long story short I got a new master cylinder new pads and all lines are bled. Now this hole time my ABS light has been on so I looked at all the sensors and i found one connector that goes to the rear axle but it has no where to plug into. But I also found some writing on the axle which tells me that is a different axle and may not have had ABS set up. But I am not sure. Now the problem I am having is when I hit the breaks i don't have much bite but if i push on them harder the rear will lock up and the front brakes are biting just a little like 50% power. So how can I get more stopping power to the front pads ? And if its that unconnected sensor is there anyway i can loop in out of the system ?.
View 6 Replies