Ford F-150 - 1997-2003 :: 1999 - No OBD2 Port And Good Fuse?
I just picked up a 99 F150 for a song because it has an issue with the PATS system and the po doesn't have a clue on what to do with it. I bought a new ignition cylinder and Auto Enginuity to program the PATS. The problem I'm having is that I'm not getting anything from the OBD2 port and the #3 fuse is good. What else would cause the port not to have signal?
View 4 RepliesFord F-150 - 1997-2003 :: OBD Port Not Working But Fuse Is Good?
Cigarette lighter works and shared fuse seems fine. OBD port even powers up my cheapo elm bluetooth reader. Unfortunately multiple different readers refuse to connect. I've tried disconnecting negative terminal for a half hour and trying again but no luck.
View 3 RepliesFord Super Duty (1999-2016) :: Blown Fuse And OBD Port Dead
Am i correct in starting to look into why I can't hook a scanner or Torque Pro bluetooth up to my truck and starting with blown Cig lighter fuse? (Cig lighter doesnt work, power port does)
View 1 RepliesFord F-150 - 1997-2003 :: Fuse Blown When Shift The Gear Lever To Below D
1997 F150 xlt 4x4 ... When I shift the gear shift lever to below D (2-1) it blows a fuse and I lose instruments. Replacing the fuse is not difficult, just tiresome..
View 6 RepliesFord 6.0L Power Stroke Diesel :: Blown Fuse Causing Lack Of Power To OBD Port?
Blown fuse causing a lack of power to the OBD port?
I just got my Kiwi2 BT OBD2 adapter and was hoping to start diagnosing my truck, but the adapter won't power on while connected to the truck.
I pulled and visually inspected fuse #12, I also verified power to the cigarette lighter plug and the accessory 12v power outlet.
The adapter powered up with no problem when I connected to a co-worker's Tacoma.
Ford F-150 - 1997-2003 :: Fuse For Driver Side Power Seat Blown
I don't know what to try next. I have a short somewhere, just don't know how to track it down. I checked the fuse for the drivers seat and it was blown. I stuck a new one in and the thing blew as soon as I stuck it in. I disconnected the seat motors, plugged in a fuse and it blew again as soon as I stuck it in. How to track this down?
I don't see any worn or shorted wires under the seat. I checked under the passenger side kick panel per another post I found, but that looks fine. I don't know where to look or what to test.
Phaeton :: OBD2 Port Location?
Where is the OBD2 port?
View 1 RepliesCaprice :: 1992 / 5.7 - Vehicle Suddenly Stopped / Fuel Pump Fuse Blown
I have a 92 caprice 5.7. Vehicle had suddenly stopped ... Providing fuel to the tbi. I immediately checked relays etc all were good. Then I figured it had to be the pump because I didn't hear the whirl of the pump with the key forward engine not cranking. I replaced the fuel pump. Still same problem no fuel. I found the 20 amp fuse blown that sits next to the 2 relays. I replace the fuse then the fuel pump got energized as I cranked the engine it almost started but then the fuse blew again. I have a short in the circuit I believe. I don't have a wiring diagram,what else is on the fuel pump circuit so I can have a direction to start in to find a probable bad wire.
View 3 RepliesFord Wiring/Electrical :: 1997 - High Beam Failure / Fuse 16 Blown
I have a 1997 Expedition that every time I replace the #16 fuse it blows when the high beams are on. It seems that it happens only when in drive and accelerating from a stopped position. I wonder if it could be either the clock spring or the multi-switch cause the short. I checked the wires on the headlights and they are fine. Again the high beams work when the truck is sitting still and the fuse is new.
View 4 RepliesFord F-150 - 1997-2003 :: High Idle - OBD2 Code With 1506?
corrected vaccum leak. Still high idle and obd2 code 1506???
View 14 RepliesFord F-150 - 1997-2003 :: P0401 OBD2 Code / Vacuum Leaks
I've had a 0401 code on my truck for the last two years. I've replaced the EGR valve and the dpfe sensor a couple of times, with fomoco parts. Ive also cleaned out the egr tube that comes off the exhaust manifold. In this time I also discovered a couple of vacuum leaks and replaced those. I changed the pcv valve, tried running 93 octane gas, and had a mechanic friend run a special smoke through the vacuum lines to find more leaks. Also put a brand new gas cap. I have an obd computer and cleared the code repeatedly but the light always returns.
View 14 RepliesPrius V :: LED Lights Are Not Working - Blown Fuse?
So I added in a set of LED lights for my license plate and parking lights. In addition to HID's for the headlights tonight. At some point my tails/parking & license plate lights shut off. I assume its a fuse, I'm wondering if this is common or the result of low quality product.
I've used the same installer/lights on every car I've had for the last 5 yrs and never an issue. No issues in my Scion Xd, Mustangs and so on.
Ford Ranger / B-Series :: 1997 - Spit / Sputtered And Died - Fuel Pump Fuse Blown
I drove my truck 2 times the day it stopped running. The 3rd time I tried to leave it started moved about 2 ft, spit and sputtered and died. It had blown the fuel pump fuse. I changed it and checked the fuel shut -off in the cab, passenger side. It was not tripped. Tried to start it and as soon as I turned the key it blew the fuse again. I changed the fuse again and this time I changed the fuel relay and the switch in the cab. Turned the key and it blew the fuse right away. Went to AutoZone because they are close to the house described what it was doing to them and they said sounds like a short in the fuel pump.
I purchased a new pump put it in turned key blew the fuse, pump just clicked...I found this site and my son noticed a thread where it said wires under the cab are good for wearing through and grounding out. I looked and it did wear through one wire coating. We taped it up, put extra cover over it and now it does not blow any fuses. Fuel pump still just clicked. Took fuel pump back for an exchange.....same thing. Turns over but fuel pump will not pump fuel. What am I missing?......
Ford F-150 (2004-2008) :: Turn Signals And Hazard Lights Quit Working / Blown Fuse Now Truck Won't Start
My 2007 F150's turn signals and hazard lights quit working. I checked the fuse and it was blown. Once I pulled the old fuse out the truck wouldn't start at all. What happened?
View 3 RepliesNeon :: 99 - Backup Light Fuse Blown And AC Quits Working
Weird deal here, the backup light fuse blows on a 1999 Neon and the AC quits blowing cold. I replace the fuse and the AC starts blowing cold. I found out this is the #8 fuse, 10 amp and it controls the rear window heat, fan relay, ac cycling switch and backup lights.
View 6 RepliesGen 2 Prius (Audio/Electronics) :: Aux Port In Center Console Stopped Working Unless Jiggle The Cable
I have a 2009 Prius with the Aux port in the center console. It has stopped working unless you jiggle the cable. Need to get a replacement?
View 4 RepliesFord F-150 - 1997-2003 :: Horn And Cruise Both Stopped Working
I have a 2003 F150. My horn and cruise both stopped working. All fuses are OK. Cruise controls are on steering wheel (as is horn). Why both would stop working???
View 2 RepliesFord F-150 - 1997-2003 :: Door Locks Just Stopped Working
Last week my door locks just stopped working so I checked all the fuses and relays which all were good but still no power took door panels off and checked with tester and no power to switches or actuators, Checked wiring in between door and cab and no broken or bare wires. This truck does have remotes and they don't work either, what's going on ?
View 2 RepliesFord F-150 - 1997-2003 :: OBD2 Code P0001 Fuel Volume Regulator Control Circuit Open?
Where to decipher engine codes? I pulled a P0001 Fuel Volume Regulator Control Circuit Open code .
View 11 Replies